#!/bin/sh

#@@example rcy(300,bar+)

#@@purpose Generate radial lead through-hole component

#@@desc Generate radial lead through-hole component with 2 pins (typical use: electrolytic caps)
#@@params spacing,pol,dia

#@@param:spacing spacing between the two pins
#@@dim:spacing

#@@param:pol how to mark polarity:  (optional; default: sign)
#@@enum:pol:none no marking
#@@enum:pol:sign print + next to pin 1 and - next to pin 2
#@@enum:pol:bar+ draw a bar inside the circle, around pin 2
#@@enum:pol:bar- draw a bar inside the circle, around pin 1
#@@enum:pol:bar same as bar+
#@@enum:pol:bar+sign bar+ and sign combined
#@@enum:pol:bar-sign bar- and sign combined
#@@optional:pol
#@@default:pol sign
#@@preview_args:pol 300

#@@param:dia body diameter - affects the silk circle
#@@optional:dia
#@@default:dia spacing*2

#@@param:3dbody 3d model body shape; if not specified, guessed from silk graphics
#@@enum:3dbody:elco electrolytic capacitor
#@@enum:3dbody:coil power coil
#@@enum:3dbody:piezo piezoelectric buzzer
#@@enum:3dbody:ldr light dependent resistor
#@@enum:3dbody:trimcap trimmable capacitor
#@@enum:3dbody:bead ferrite bead
#@@optional:3dbody

#@@param:3dbodydia the diameter (or width) of the body on the 3d model, if it differs from dia
#@@optional:3dbodydia
#@@dim:3dbodydia

#@@param:3dpindia pin diameter on the 3d model
#@@dim:3dpindia
#@@optional:3dpindia

#@@param:3delevation z-height of the body of the 3d model
#@@optional:3delevation

#@@include common_subc.awk

awk -f `dirname $0`/common_subc.awk -f `dirname $0`/rcy.awk -v "args=$*" -v gen=`basename $0` -v "genfull=$0"