Index: 1206.scad
===================================================================
--- 1206.scad	(nonexistent)
+++ 1206.scad	(revision 11902)
@@ -0,0 +1,15 @@
+module part_1206()
+{
+	translate([0,0,0.3]) {
+		// body
+		color([0.1,0.1,0.1])
+			cube([3.2-2*0.2,1.6,0.6], center=true);
+		// terminals
+		color([0.8,0.8,0.8]) {
+			translate([+1.5, 0, 0])
+				cube([0.2, 1.6, 0.6], center=true);
+			translate([-1.5, 0, 0])
+				cube([0.2, 1.6, 0.6], center=true);
+		}
+	}
+}
Index: sot23.scad
===================================================================
--- sot23.scad	(nonexistent)
+++ sot23.scad	(revision 11902)
@@ -0,0 +1,36 @@
+
+module sot23()
+{
+
+	// pin prototype
+	module pin(length, height, thick)
+	{
+		linear_extrude(height=thick)
+			scale([length, -height, 1])
+				polygon([[0.3400,0.0000],[0.3900,0.0100],[0.4300,0.0300],[0.4600,0.0600],[0.4789,0.0908],[0.6279,0.8307],[0.6500,0.8600],[0.6900,0.8900],[0.7300,0.9000],[1.0000,0.9000],[1.0000,1.0000],[0.6700,1.0012],[0.6100,0.9900],[0.5600,0.9600],[0.5300,0.9200],[0.5200,0.9000],[0.3721,0.1693],[0.3500,0.1400],[0.3100,0.1100],[0.2700,0.1000],[0.0000,0.1000],[0.0000,0.0000]]);
+	}
+
+	rotate([90,0,-90]) scale([1.13,1.13,1.13]) translate([-0.9, 0.4, -2.1 - 0.43/2]) {
+		// body
+		color([0.1,0.1,0.1])
+			linear_extrude(height=2.9)
+				polygon([[-0.55,0],[-0.45,0.53],[0.45,0.53],[0.55,0],[0.45,-0.35],[-0.45,-0.35]]);
+
+		// 3 pins
+		color([0.9, 0.9, 0.9]) {
+			translate([0.5,0,0.5-0.43/2])
+				pin(0.5, 0.4, 0.43);
+
+			translate([0.5,0,2.3-0.43/2])
+				pin(0.5, 0.4, 0.43);
+
+			translate([-0.5,0,1.45-0.43/2])
+				pin(-0.5, 0.4, 0.43);
+		}
+	}
+}
+
+
+sot23();
+
+cube([0.1,0.1,0.1]);