Index: Makefile
===================================================================
--- Makefile	(nonexistent)
+++ Makefile	(revision 1400)
@@ -0,0 +1,6 @@
+all:
+	cd ../../src && make mod_shand_cmd
+	
+
+clean:
+	rm *.o *.so 2>/dev/null ; true
Index: Plug.tmpasm
===================================================================
--- Plug.tmpasm	(nonexistent)
+++ Plug.tmpasm	(revision 1400)
@@ -0,0 +1,8 @@
+put /local/pcb/mod {shand_cmd}
+put /local/pcb/mod/OBJS [@ $(PLUGDIR)/shand_cmd/command.o @]
+
+switch /local/pcb/shand_cmd/controls
+	case {buildin}   include {Makefile.in.mod/Buildin}; end;
+	case {plugin}    include {Makefile.in.mod/Plugin}; end;
+	case {disable}   include {Makefile.in.mod/Disable}; end;
+end
Index: README
===================================================================
--- README	(nonexistent)
+++ README	(revision 1400)
@@ -0,0 +1,4 @@
+vi-like command shorthands (1..3 character long commands)
+
+#state: works
+#default: buildin
Index: command.c
===================================================================
--- command.c	(nonexistent)
+++ command.c	(revision 1400)
@@ -0,0 +1,417 @@
+/* $Id$ */
+
+/*
+ *                            COPYRIGHT
+ *
+ *  PCB, interactive printed circuit board design
+ *  Copyright (C) 1994,1995,1996, 2005 Thomas Nau
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ *  Contact addresses for paper mail and Email:
+ *  Thomas Nau, Schlehenweg 15, 88471 Baustetten, Germany
+ *  Thomas.Nau@rz.uni-ulm.de
+ *
+ */
+
+/* executes commands from user
+ */
+
+#include "config.h"
+
+#include <stdlib.h>
+#ifdef HAVE_STRING_H
+#include <string.h>
+#endif
+#include <ctype.h>
+
+#include "global.h"
+#include "action_helper.h"
+#include "buffer.h"
+#include "command.h"
+#include "data.h"
+#include "error.h"
+#include "file.h"
+#include "mymem.h"
+#include "misc.h"
+#include "rats.h"
+#include "set.h"
+#include "plugins.h"
+#include "hid_actions.h"
+
+
+RCSID("$Id$");
+
+/* ---------------------------------------------------------------------- */
+
+/*  %start-doc actions 00macros
+
+@macro colonaction
+
+This is one of the command box helper actions.  While it is a regular
+action and can be used like any other action, its name and syntax are
+optimized for use with the command box (@code{:}) and thus the syntax
+is documented for that purpose.
+
+@end macro
+
+%end-doc */
+
+/* ---------------------------------------------------------------------- */
+
+static const char h_syntax[] = "h";
+
+static const char h_help[] = "Print a help message for commands.";
+
+/* %start-doc actions h
+
+@colonaction
+
+%end-doc */
+
+static int CommandHelp(int argc, char **argv, Coord x, Coord y)
+{
+	Message("following commands are supported:\n"
+					"  Command()   execute an action command (too numerous to list)\n"
+					"              see the manual for the list of action commands\n"
+					"  h           display this help message\n"
+					"  l  [file]   load layout\n"
+					"  le [file]   load element to buffer\n"
+					"  m  [file]   load layout to buffer (merge)\n"
+					"  q           quits the application\n"
+					"  q!          quits without save warning\n"
+					"  rn [file]   read in a net-list file\n"
+					"  s  [file]   save layout\n" "  w  [file]   save layout\n" "  wq [file]   save layout and quit\n");
+	return (0);
+}
+
+/* ---------------------------------------------------------------------- */
+
+static const char l_syntax[] = "l [name]";
+
+static const char l_help[] = "Loads layout data.";
+
+/* %start-doc actions l
+
+Loads a new datafile (layout) and, if confirmed, overwrites any
+existing unsaved data.  The filename and the searchpath
+(@emph{filePath}) are passed to the command defined by
+@emph{fileCommand}.  If no filename is specified a file select box
+will popup.
+
+@colonaction
+
+%end-doc */
+
+static int CommandLoadLayout(int argc, char **argv, Coord x, Coord y)
+{
+	char *filename, *name = NULL;
+
+	switch (argc) {
+	case 1:											/* filename is passed in commandline */
+		filename = argv[0];
+		break;
+
+	default:											/* usage */
+		Message("Usage: l [name]\n  loads layout data\n");
+		return (1);
+	}
+
+	if (!PCB->Changed || gui->confirm_dialog("OK to override layout data?", 0))
+		LoadPCB(filename, true, false);
+	free(name);
+	return (0);
+}
+
+/* --------------------------------------------------------------------------- */
+
+static const char le_syntax[] = "le [name]";
+
+static const char le_help[] = "Loads an element into the current buffer.";
+
+/* %start-doc actions le
+
+The filename and the searchpath (@emph{elementSearchPaths}) are passed to the
+element loader.  If no filename is specified a file select box will popup.
+
+@colonaction
+
+%end-doc */
+
+static int CommandLoadElementToBuffer(int argc, char **argv, Coord x, Coord y)
+{
+	char *filename;
+
+	switch (argc) {
+	case 1:											/* filename is passed in commandline */
+		filename = argv[0];
+		if (filename && LoadElementToBuffer(PASTEBUFFER, filename))
+			SetMode(PASTEBUFFER_MODE);
+		break;
+
+	default:											/* usage */
+		Message(false, "Usage: le [name]\n  loads element data to buffer\n");
+		return (1);
+	}
+	return (0);
+}
+
+/* --------------------------------------------------------------------------- */
+
+static const char m_syntax[] = "m [name]";
+
+static const char m_help[] = "Loads a layout into the current buffer.";
+
+/* %start-doc actions m
+
+The filename and the searchpath (@emph{filePath}) are passed to the
+command defined by @emph{fileCommand}.
+If no filename is specified a file select box will popup.
+
+@colonaction
+
+%end-doc */
+
+static int CommandLoadLayoutToBuffer(int argc, char **argv, Coord x, Coord y)
+{
+	char *filename;
+
+	switch (argc) {
+	case 1:											/* filename is passed in commandline */
+		filename = argv[0];
+		if (filename && LoadLayoutToBuffer(PASTEBUFFER, filename))
+			SetMode(PASTEBUFFER_MODE);
+		break;
+
+	default:											/* usage */
+		Message("Usage: m [name]\n  loads layout data to buffer\n");
+		return (1);
+	}
+	return (0);
+}
+
+/* --------------------------------------------------------------------------- */
+
+static const char q_syntax[] = "q";
+
+static const char q_help[] = "Quits the application after confirming.";
+
+/* %start-doc actions q
+
+If you have unsaved changes, you will be prompted to confirm (or
+save) before quitting.
+
+@colonaction
+
+%end-doc */
+
+static int CommandQuit(int argc, char **argv, Coord x, Coord y)
+{
+	if (!PCB->Changed || gui->close_confirm_dialog() == HID_CLOSE_CONFIRM_OK)
+		QuitApplication();
+	return 0;
+}
+
+static const char qreally_syntax[] = "q!";
+
+static const char qreally_help[] = "Quits the application without confirming.";
+
+/* %start-doc actions q!
+
+Note that this command neither saves your data nor prompts for
+confirmation.
+
+@colonaction
+
+%end-doc */
+
+static int CommandReallyQuit(int argc, char **argv, Coord x, Coord y)
+{
+	QuitApplication();
+	return 0;
+}
+
+/* ---------------------------------------------------------------------- */
+
+static const char rn_syntax[] = "rn [name]";
+
+static const char rn_help[] = "Reads netlist.";
+
+/* %start-doc actions rn
+
+If no filename is given a file select box will pop up.  The file is
+read via the command defined by the @emph{RatCommand} resource. The
+command must send its output to @emph{stdout}.
+
+Netlists are used for generating rat's nests (see @ref{Rats Nest}) and
+for verifying the board layout (which is also accomplished by the
+@emph{Ratsnest} command).
+
+@colonaction
+
+%end-doc */
+
+static int CommandLoadNetlist(int argc, char **argv, Coord x, Coord y)
+{
+	char *filename, *name = NULL;
+
+	switch (argc) {
+	case 1:											/* filename is passed in commandline */
+		filename = argv[0];
+		break;
+
+	default:											/* usage */
+		Message("Usage: rn [name]\n  reads in a netlist file\n");
+		return (1);
+	}
+	if (PCB->Netlistname)
+		free(PCB->Netlistname);
+	PCB->Netlistname = StripWhiteSpaceAndDup(filename);
+	free(name);
+	return (0);
+}
+
+/* ---------------------------------------------------------------------- */
+
+static const char s_syntax[] = "s [name]";
+
+static const char s_help[] = "Saves layout data.";
+
+/* %start-doc actions s
+
+Data and the filename are passed to the command defined by the
+resource @emph{saveCommand}. It must read the layout data from
+@emph{stdin}.  If no filename is entered, either the last one is used
+again or, if it is not available, a file select box will pop up.
+
+@colonaction
+
+%end-doc */
+
+static const char w_syntax[] = "w [name]";
+
+static const char w_help[] = "Saves layout data.";
+
+/* %start-doc actions w
+
+This commands has been added for the convenience of @code{vi} users
+and has the same functionality as @code{s}.
+
+@colonaction
+
+%end-doc */
+
+static int CommandSaveLayout(int argc, char **argv, Coord x, Coord y)
+{
+	switch (argc) {
+	case 0:
+		if (PCB->Filename) {
+			if (SavePCB(PCB->Filename) == 0)
+				SetChangedFlag(false);
+		}
+		else
+			Message("No filename to save to yet\n");
+		break;
+
+	case 1:
+		if (SavePCB(argv[0]) == 0) {
+			SetChangedFlag(false);
+			free(PCB->Filename);
+			PCB->Filename = strdup(argv[0]);
+			if (gui->notify_filename_changed != NULL)
+				gui->notify_filename_changed();
+		}
+		break;
+
+	default:
+		Message("Usage: s [name] | w [name]\n  saves layout data\n");
+		return (1);
+	}
+	return (0);
+}
+
+/* --------------------------------------------------------------------------- */
+
+static const char wq_syntax[] = "wq";
+
+static const char wq_help[] = "Saves the layout data and quits.";
+
+/* %start-doc actions wq
+
+This command has been added for the convenience of @code{vi} users and
+has the same functionality as @code{s} combined with @code{q}.
+
+@colonaction
+
+%end-doc */
+
+static int CommandSaveLayoutAndQuit(int argc, char **argv, Coord x, Coord y)
+{
+	if (!CommandSaveLayout(argc, argv, x, y))
+		return CommandQuit(0, 0, 0, 0);
+	return (1);
+}
+
+/* --------------------------------------------------------------------------- */
+
+HID_Action shand_cmd_action_list[] = {
+	{"h", 0, CommandHelp,
+	 h_help, h_syntax}
+	,
+	{"l", 0, CommandLoadLayout,
+	 l_help, l_syntax}
+	,
+	{"le", 0, CommandLoadElementToBuffer,
+	 le_help, le_syntax}
+	,
+	{"m", 0, CommandLoadLayoutToBuffer,
+	 m_help, m_syntax}
+	,
+	{"q", 0, CommandQuit,
+	 q_help, q_syntax}
+	,
+	{"q!", 0, CommandReallyQuit,
+	 qreally_help, qreally_syntax}
+	,
+	{"rn", 0, CommandLoadNetlist,
+	 rn_help, rn_syntax}
+	,
+	{"s", 0, CommandSaveLayout,
+	 s_help, s_syntax}
+	,
+	{"w", 0, CommandSaveLayout,
+	 w_help, w_syntax}
+	,
+	{"wq", 0, CommandSaveLayoutAndQuit,
+	 wq_help, wq_syntax}
+	,
+};
+
+static const char *shand_cmd_cookie = "shand_cmd plugin";
+
+REGISTER_ACTIONS(shand_cmd_action_list, shand_cmd_cookie)
+
+static void hid_shand_cmd_uninit(void)
+{
+	hid_remove_actions_by_cookie(shand_cmd_cookie);
+}
+
+#include "dolists.h"
+pcb_uninit_t hid_shand_cmd_init(void)
+{
+	REGISTER_ACTIONS(shand_cmd_action_list, shand_cmd_cookie)
+	return hid_shand_cmd_uninit;
+}
+
Index: command.h
===================================================================
--- command.h	(nonexistent)
+++ command.h	(revision 1400)
@@ -0,0 +1,39 @@
+/*
+ *                            COPYRIGHT
+ *
+ *  PCB, interactive printed circuit board design
+ *  Copyright (C) 1994,1995,1996 Thomas Nau
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ *  Contact addresses for paper mail and Email:
+ *  Thomas Nau, Schlehenweg 15, 88471 Baustetten, Germany
+ *  Thomas.Nau@rz.uni-ulm.de
+ *
+ *  RCS: $Id$
+ */
+
+/* prototypes for command execution
+ */
+
+#ifndef	PCB_COMMAND_H
+#define	PCB_COMMAND_H
+
+#include "global.h"
+
+void ExecuteUserCommand(char *);
+void CallActionProc(char *action, char **arg, int argc);
+
+#endif