Index: comm_flags_old.lht
===================================================================
--- comm_flags_old.lht	(nonexistent)
+++ comm_flags_old.lht	(revision 16836)
@@ -0,0 +1,66 @@
+ha:lht_tree_doc { ha:comm {
+
+# these obsolete flags are only relevant in compatibility mode;
+# they are not generated by the flag dump but they will not change
+# thus this file is hand-written
+
+	ha:flags_element {
+		hide=1
+		desc={flag bits of an element}
+		type=ha
+		li:children {
+			ha:found { valtype=flag; desc={If set, this object has been found by FindConnection()}}
+			ha:selected { valtype=flag; desc={Set when the object is selected.}}
+			ha:auto { valtype=flag; desc={For lines and vias, indicates that these were created by the autorouter.}}
+			ha:drc { valtype=flag; desc={Set for objects that fail DRC: flag like FOUND flag for DRC checking.}}
+			ha:lock { valtype=flag; desc={Set for locked objects.}}
+			ha:nonetlist { valtype=flag; desc={subcircuit is not on the netlist and should not interfere with the netlist }}
+			ha:termname { valtype=flag; desc={when set the names of pins are shown.}}
+			ha:floater { valtype=flag; desc={subc part can be moved after subc placing}}
+			ha:onsolder { valtype=flag; desc={element is placed on the solder side}}
+		}
+	}
+	ha:flags_pinvia {
+		hide=1
+		desc={flag bits of a pin or via}
+		type=ha
+		li:children {
+			ha:found { valtype=flag; desc={If set, this object has been found by FindConnection()}}
+			ha:hole { valtype=flag; desc={For pins and vias, this flag means that the pin or via is a hole without a copper annulus.}}
+			ha:clearline { valtype=flag; desc={For lines and arcs, the line/arc will clear polygons instead of connecting to them.}}
+			ha:selected { valtype=flag; desc={Set when the object is selected.}}
+			ha:auto { valtype=flag; desc={For lines and vias, indicates that these were created by the autorouter.}}
+			ha:warn { valtype=flag; desc={For pins, vias, and pads, set to indicate a warning.}}
+			ha:usetherm { valtype=flag; desc={Obsolete, indicates that pins/vias should be drawn with thermal fingers.}}
+			ha:drc { valtype=flag; desc={Set for objects that fail DRC: flag like FOUND flag for DRC checking.}}
+			ha:lock { valtype=flag; desc={Set for locked objects.}}
+			ha:nonetlist { valtype=flag; desc={subcircuit is not on the netlist and should not interfere with the netlist }}
+			ha:termname { valtype=flag; desc={when set the names of pins are shown.}}
+			ha:floater { valtype=flag; desc={subc part can be moved after subc placing}}
+			ha:pin { valtype=flag; desc={object is a pin (in an element)}}
+			ha:via { valtype=flag; desc={object is a via}}
+		}
+	}
+
+	ha:flags_pad {
+		hide=1
+		desc={flag bits of a pad}
+		type=ha
+		li:children {
+			ha:found { valtype=flag; desc={If set, this object has been found by FindConnection()}}
+			ha:hole { valtype=flag; desc={For pins and vias, this flag means that the pin or via is a hole without a copper annulus.}}
+			ha:clearline { valtype=flag; desc={For lines and arcs, the line/arc will clear polygons instead of connecting to them.}}
+			ha:selected { valtype=flag; desc={Set when the object is selected.}}
+			ha:auto { valtype=flag; desc={For lines and vias, indicates that these were created by the autorouter.}}
+			ha:warn { valtype=flag; desc={For pins, vias, and pads, set to indicate a warning.}}
+			ha:usetherm { valtype=flag; desc={Obsolete, indicates that pins/vias should be drawn with thermal fingers.}}
+			ha:drc { valtype=flag; desc={Set for objects that fail DRC: flag like FOUND flag for DRC checking.}}
+			ha:lock { valtype=flag; desc={Set for locked objects.}}
+			ha:nonetlist { valtype=flag; desc={subcircuit is not on the netlist and should not interfere with the netlist }}
+			ha:termname { valtype=flag; desc={when set the names of pins are shown.}}
+			ha:floater { valtype=flag; desc={subc part can be moved after subc placing}}
+			ha:pin { valtype=flag; desc={object is a pin (in an element)}}
+			ha:via { valtype=flag; desc={object is a via}}
+		}
+	}
+} }