Index: trunk/doc/tutorials/15_no_sch/index.html =================================================================== --- trunk/doc/tutorials/15_no_sch/index.html (revision 24780) +++ trunk/doc/tutorials/15_no_sch/index.html (revision 24781) @@ -104,16 +104,92 @@
  • network called out: J2-1, U1-3, C2-1

    - Board file for step3. + Board file for step3.

    -

    step 4: draw the in and out nets

    +

    step 5: draw the in and out nets

    +

    +Select the line tool (hotkey: F2). Select the 'Power' style from the +bottom left style selector - this will get the traces you'll be +drawing thicker. Select the bottom signal layer, called "bottom-sig" in +the layer selector on the left. This way the new traces will end up on +copper on the bottom side of the board. +

    +Start drawing a line from J1-1 with left click. The line will bend in +45 degrees. You can press the shift key and move the mouse to invert +the refraction temporarily, or use the slash key to cycle through differen +refractions (including the ortho mode, which allows 90 degree lines only). +With 2..3 clicks, connect J1-1 and C3's '+' pin. +

    +Now that one of the logical connections is turned to copper, press {c r} +(for "connection, refresh rats") - this will recalculate all rats, considering +already established connections. +

    +Draw the remaining segments of the in net, using {c r} to see the +progress. The number of remaining rat lines is also printed in the message +log, which can be opened using {w m}. +

    +Do the same for the out network. At the end only the gnd network +should remain unrouted: +

    +step4: in and out routed +

    + Board file for step4. -

    step 5: draw the gnd poly

    +

    step 6: draw the gnd poly

    +

    +We could route the gnd net the same way, using thick traces. +However, it's more common to have a solid ground plane/pour, which is +a polygon in pcb-rnd. +

    +Select the bottom-gnd layer. This layer is in the same layer group, +bottom copper, as the other layer we used, so at the end it will go +on the same physical copper layer. However, it has a different color +configured on screen, which would make it easier to see what's connected +to gnd. +

    +Select the rect tool from the toolbar. This will draw a rectangular polygon. +Do a single click on the top left corner of your circuit. After releasing +the mouse button, the rectangle tool draws an overlay indication on how big +the polygon would be. Move the mouse cursor to the bottom right corner until the +box encloses the whole circuit and some margin and do another single click. +

    +This will finish the operation and a large red rectangular polygon will appear. +However, {c r} shows that no gnd rat line got routed: the terminals of +the subcircuits won't automatically touch the polygon. The easiest way to +get them connected is using the thermal tool (labelled THRM in the toolbar). +Select the thermal tool and click on the J1-2. An X shaped connection will +appear to the polygon. +

    +Note: it's important to still have the bottom-gnd +layer selected: the thermal tool connects the terminal to the polygon on the +currently selected layer, so the currently selected layer should be the one +we drew the ground plane polygon on. +

    +Another click on the terminal would remove the thermal - it's a toggle operation. +When the thermal is there, a shift+click with the thermal tool will change +the thermal style, cycling through different available styles. +

    +Use the thermal tool to connect all gnd terminals and press {c r}. +

    +step6: board finished +

    + Board file for step6. +

    Note on the view

    +

    +We've been drawing the board from looking at it from the top, with +'x-ray vision', seeing all copper on the bottom. Once the board is fabbed, +this is not how we'll see it. +

    +It is possible to flip the board using the tab key, to get a bottom view. +There's also shift-tab an ctrl-tab to flip among different axes. Flipping +is a view-only feature, it does not modify any geometry or physical +property of the board. +

    Footnotes: \ No newline at end of file + Index: trunk/doc/tutorials/15_no_sch/step4.lht =================================================================== --- trunk/doc/tutorials/15_no_sch/step4.lht (nonexistent) +++ trunk/doc/tutorials/15_no_sch/step4.lht (revision 24781) @@ -0,0 +1,2235 @@ +ha:pcb-rnd-board-v6 { + + ha:attributes { + {PCB::grid::unit}=mil + } + + li:styles { + ha:Signal { + diameter = 2.0mm + text_scale = 0 + text_thick = 0.0 + thickness = 10.0mil + hole = 31.5mil + clearance = 20.0mil + } + ha:Power { + diameter = 2.2mm + text_scale = 0 + text_thick = 0.0 + thickness = 20.0mil + hole = 1.0mm + clearance = 20.0mil + } + ha:Fat { + diameter = 137.8mil + text_scale = 0 + text_thick = 0.0 + thickness = 80.0mil + hole = 47.24mil + clearance = 25.0mil + } + ha:Sig-tight { + diameter = 64.0mil + text_scale = 0 + text_thick = 0.0 + thickness = 10.0mil + hole = 31.5mil + clearance = 12.0mil + } + } + + ha:meta { + ha:size { + thermal_scale = 0.500000 + x = 127.0mm + y = 127.0mm + } + ha:grid { + spacing = 25.0mil + offs_x = 0.0 + offs_y = 0.0 + } + } + + ha:data { + li:padstack_prototypes { + } + + li:objects { + ha:subc.1158 { + ha:attributes { + value=TO220 + footprint=Transistor + refdes=U1 + } + ha:data { + li:padstack_prototypes { + + ha:ps_proto_v6.0 { + hdia=60.0mil; hplated=1; htop=0; hbottom=0; + li:shape { + + ha:ps_shape_v4 { + ha:combining { } + ha:layer_mask { + copper = 1 + top = 1 + } + clearance=0.0 + li:ps_poly { + -45.0mil + -45.0mil + 45.0mil + -45.0mil + 45.0mil + 45.0mil + -45.0mil + 45.0mil + } + } + + ha:ps_shape_v4 { + ha:combining { } + ha:layer_mask { + bottom = 1 + copper = 1 + } + clearance=0.0 + li:ps_poly { + -45.0mil + -45.0mil + 45.0mil + -45.0mil + 45.0mil + 45.0mil + -45.0mil + 45.0mil + } + } + + ha:ps_shape_v4 { + ha:combining { } + ha:layer_mask { + copper = 1 + intern = 1 + } + clearance=0.0 + li:ps_poly { + -45.0mil + -45.0mil + 45.0mil + -45.0mil + 45.0mil + 45.0mil + -45.0mil + 45.0mil + } + } + + ha:ps_shape_v4 { + ha:combining { sub=1; auto=1; } + ha:layer_mask { + top = 1 + mask = 1 + } + clearance=0.0 + li:ps_poly { + -48.0mil + -48.0mil + 48.0mil + -48.0mil + 48.0mil + 48.0mil + -48.0mil + 48.0mil + } + } + + ha:ps_shape_v4 { + ha:combining { sub=1; auto=1; } + ha:layer_mask { + bottom = 1 + mask = 1 + } + clearance=0.0 + li:ps_poly { + -48.0mil + -48.0mil + 48.0mil + -48.0mil + 48.0mil + 48.0mil + -48.0mil + 48.0mil + } + } + } + } + + ha:ps_proto_v6.1 { + hdia=60.0mil; hplated=1; htop=0; hbottom=0; + li:shape { + + ha:ps_shape_v4 { + ha:ps_circ { x=0.0; y=0.0; dia=90.0mil; } + ha:combining { } + ha:layer_mask { + copper = 1 + top = 1 + } + clearance=0.0 + } + + ha:ps_shape_v4 { + ha:ps_circ { x=0.0; y=0.0; dia=90.0mil; } + ha:combining { } + ha:layer_mask { + bottom = 1 + copper = 1 + } + clearance=0.0 + } + + ha:ps_shape_v4 { + ha:ps_circ { x=0.0; y=0.0; dia=90.0mil; } + ha:combining { } + ha:layer_mask { + copper = 1 + intern = 1 + } + clearance=0.0 + } + + ha:ps_shape_v4 { + ha:ps_circ { x=0.0; y=0.0; dia=96.0mil; } + ha:combining { sub=1; auto=1; } + ha:layer_mask { + top = 1 + mask = 1 + } + clearance=0.0 + } + + ha:ps_shape_v4 { + ha:ps_circ { x=0.0; y=0.0; dia=96.0mil; } + ha:combining { sub=1; auto=1; } + ha:layer_mask { + bottom = 1 + mask = 1 + } + clearance=0.0 + } + } + } + + ha:ps_proto_v6.2 { + hdia=130.0mil; hplated=1; htop=0; hbottom=0; + li:shape { + + ha:ps_shape_v4 { + ha:ps_circ { x=0.0; y=0.0; dia=150.0mil; } + ha:combining { } + ha:layer_mask { + copper = 1 + top = 1 + } + clearance=0.0 + } + + ha:ps_shape_v4 { + ha:ps_circ { x=0.0; y=0.0; dia=150.0mil; } + ha:combining { } + ha:layer_mask { + bottom = 1 + copper = 1 + } + clearance=0.0 + } + + ha:ps_shape_v4 { + ha:ps_circ { x=0.0; y=0.0; dia=150.0mil; } + ha:combining { } + ha:layer_mask { + copper = 1 + intern = 1 + } + clearance=0.0 + } + + ha:ps_shape_v4 { + ha:ps_circ { x=0.0; y=0.0; dia=156.0mil; } + ha:combining { sub=1; auto=1; } + ha:layer_mask { + top = 1 + mask = 1 + } + clearance=0.0 + } + + ha:ps_shape_v4 { + ha:ps_circ { x=0.0; y=0.0; dia=156.0mil; } + ha:combining { sub=1; auto=1; } + ha:layer_mask { + bottom = 1 + mask = 1 + } + clearance=0.0 + } + } + } + } + + li:objects { + ha:padstack_ref.1229 { + proto=0; x=44.45mm; y=1.8in; rot=0.000000; xmirror=0; smirror=0; clearance=15.0mil; + ha:flags { + clearline=1 + } + + li:thermal { + } + + ha:attributes { + term=1 + name=1 + } + } + ha:padstack_ref.1230 { + proto=1; x=46.99mm; y=1.8in; rot=0.000000; xmirror=0; smirror=0; clearance=15.0mil; + ha:flags { + clearline=1 + } + + li:thermal { + li:3 { + on + diag + round + noshape + } + } + + ha:attributes { + term=2 + name=2 + } + } + ha:padstack_ref.1231 { + proto=1; x=49.53mm; y=1.8in; rot=0.000000; xmirror=0; smirror=0; clearance=15.0mil; + ha:flags { + clearline=1 + } + + li:thermal { + } + + ha:attributes { + term=3 + name=3 + } + } + ha:padstack_ref.1232 { + proto=2; x=46.99mm; y=1.13in; rot=0.000000; xmirror=0; smirror=0; clearance=15.0mil; + ha:flags { + clearline=1 + } + + li:thermal { + } + + ha:attributes { + term=4 + name=4 + } + } + } + li:layers { + + ha:top-silk { + lid=0 + ha:combining { } + + li:objects { + ha:line.1159 { + x1=44.45mm; y1=1.8in; x2=44.45mm; y2=1.62in; thickness=30.0mil; clearance=0.0; + } + ha:line.1162 { + x1=46.99mm; y1=1.8in; x2=46.99mm; y2=1.62in; thickness=30.0mil; clearance=0.0; + } + ha:line.1165 { + x1=49.53mm; y1=1.8in; x2=49.53mm; y2=1.62in; thickness=30.0mil; clearance=0.0; + } + ha:line.1168 { + x1=1.65in; y1=1.62in; x2=52.07mm; y2=1.62in; thickness=20.0mil; clearance=0.0; + } + ha:line.1171 { + x1=52.07mm; y1=1.62in; x2=52.07mm; y2=31.623mm; thickness=20.0mil; clearance=0.0; + } + ha:line.1174 { + x1=52.07mm; y1=31.623mm; x2=1.65in; y2=31.623mm; thickness=20.0mil; clearance=0.0; + } + ha:line.1177 { + x1=1.65in; y1=31.623mm; x2=1.65in; y2=1.62in; thickness=20.0mil; clearance=0.0; + } + ha:line.1180 { + x1=1.65in; y1=31.623mm; x2=52.07mm; y2=31.623mm; thickness=20.0mil; clearance=0.0; + } + ha:line.1183 { + x1=52.07mm; y1=31.623mm; x2=52.07mm; y2=1.12in; thickness=20.0mil; clearance=0.0; + } + ha:line.1186 { + x1=52.07mm; y1=1.12in; x2=51.689mm; y2=1.12in; thickness=20.0mil; clearance=0.0; + } + ha:line.1189 { + x1=51.689mm; y1=1.12in; x2=51.689mm; y2=26.67mm; thickness=20.0mil; clearance=0.0; + } + ha:line.1192 { + x1=51.689mm; y1=26.67mm; x2=52.07mm; y2=26.67mm; thickness=20.0mil; clearance=0.0; + } + ha:line.1195 { + x1=52.07mm; y1=26.67mm; x2=52.07mm; y2=1.01in; thickness=20.0mil; clearance=0.0; + } + ha:line.1198 { + x1=52.07mm; y1=1.01in; x2=1.65in; y2=1.01in; thickness=20.0mil; clearance=0.0; + } + ha:line.1201 { + x1=1.65in; y1=1.01in; x2=1.65in; y2=26.67mm; thickness=20.0mil; clearance=0.0; + } + ha:line.1204 { + x1=1.65in; y1=26.67mm; x2=1.665in; y2=26.67mm; thickness=20.0mil; clearance=0.0; + } + ha:line.1207 { + x1=1.665in; y1=26.67mm; x2=1.665in; y2=1.12in; thickness=20.0mil; clearance=0.0; + } + ha:line.1210 { + x1=1.665in; y1=1.12in; x2=1.65in; y2=1.12in; thickness=20.0mil; clearance=0.0; + } + ha:line.1213 { + x1=1.65in; y1=1.12in; x2=1.65in; y2=31.623mm; thickness=20.0mil; clearance=0.0; + } + ha:text.1216 { + string=%a.parent.refdes%; x=40.005mm; y=27.813mm; scale=100; fid=0; + ha:flags { + dyntext=1 + floater=1 + } + rot = 90.000000 + } + } + ha:type { + silk = 1 + top = 1 + } + } + + ha:subc-aux { + lid=1 + ha:combining { } + + li:objects { + ha:line.1217 { + x1=46.99mm; y1=1.6325in; x2=46.99mm; y2=1.6325in; thickness=0.1mm; clearance=0.0; + ha:attributes { + subc-role=pnp-origin + } + } + ha:line.1220 { + x1=46.99mm; y1=1.8in; x2=46.99mm; y2=1.8in; thickness=0.1mm; clearance=0.0; + ha:attributes { + subc-role=origin + } + } + ha:line.1223 { + x1=46.99mm; y1=1.8in; x2=46.99mm; y2=46.72mm; thickness=0.1mm; clearance=0.0; + ha:attributes { + subc-role=x + } + } + ha:line.1226 { + x1=46.99mm; y1=1.8in; x2=47.99mm; y2=1.8in; thickness=0.1mm; clearance=0.0; + ha:attributes { + subc-role=y + } + } + } + ha:type { + top = 1 + misc = 1 + virtual = 1 + } + } + } + } + uid = 2YrIDHgdUiD93dfM91oAAAAJ + } + ha:subc.1234 { + ha:attributes { + value=acy200 + footprint=rcy(200) + refdes=C3 + } + ha:data { + li:padstack_prototypes { + + ha:ps_proto_v6.0 { + hdia=0.999998mm; hplated=1; htop=0; hbottom=0; + li:shape { + + ha:ps_shape_v4 { + ha:combining { } + ha:layer_mask { + copper = 1 + top = 1 + } + clearance=0.0 + li:ps_poly { + -40.0mil + -40.0mil + 40.0mil + -40.0mil + 40.0mil + 40.0mil + -40.0mil + 40.0mil + } + } + + ha:ps_shape_v4 { + ha:combining { } + ha:layer_mask { + bottom = 1 + copper = 1 + } + clearance=0.0 + li:ps_poly { + -40.0mil + -40.0mil + 40.0mil + -40.0mil + 40.0mil + 40.0mil + -40.0mil + 40.0mil + } + } + + ha:ps_shape_v4 { + ha:combining { } + ha:layer_mask { + copper = 1 + intern = 1 + } + clearance=0.0 + li:ps_poly { + -40.0mil + -40.0mil + 40.0mil + -40.0mil + 40.0mil + 40.0mil + -40.0mil + 40.0mil + } + } + + ha:ps_shape_v4 { + ha:combining { sub=1; auto=1; } + ha:layer_mask { + top = 1 + mask = 1 + } + clearance=0.0 + li:ps_poly { + -43.0mil + -43.0mil + 43.0mil + -43.0mil + 43.0mil + 43.0mil + -43.0mil + 43.0mil + } + } + + ha:ps_shape_v4 { + ha:combining { sub=1; auto=1; } + ha:layer_mask { + bottom = 1 + mask = 1 + } + clearance=0.0 + li:ps_poly { + -43.0mil + -43.0mil + 43.0mil + -43.0mil + 43.0mil + 43.0mil + -43.0mil + 43.0mil + } + } + } + } + + ha:ps_proto_v6.1 { + hdia=0.999998mm; hplated=1; htop=0; hbottom=0; + li:shape { + + ha:ps_shape_v4 { + ha:ps_circ { x=0.0; y=0.0; dia=80.0mil; } + ha:combining { } + ha:layer_mask { + copper = 1 + top = 1 + } + clearance=0.0 + } + + ha:ps_shape_v4 { + ha:ps_circ { x=0.0; y=0.0; dia=80.0mil; } + ha:combining { } + ha:layer_mask { + bottom = 1 + copper = 1 + } + clearance=0.0 + } + + ha:ps_shape_v4 { + ha:ps_circ { x=0.0; y=0.0; dia=80.0mil; } + ha:combining { } + ha:layer_mask { + copper = 1 + intern = 1 + } + clearance=0.0 + } + + ha:ps_shape_v4 { + ha:ps_circ { x=0.0; y=0.0; dia=86.0mil; } + ha:combining { sub=1; auto=1; } + ha:layer_mask { + top = 1 + mask = 1 + } + clearance=0.0 + } + + ha:ps_shape_v4 { + ha:ps_circ { x=0.0; y=0.0; dia=86.0mil; } + ha:combining { sub=1; auto=1; } + ha:layer_mask { + bottom = 1 + mask = 1 + } + clearance=0.0 + } + } + } + } + + li:objects { + ha:padstack_ref.1258 { + proto=0; x=31.75mm; y=1.525in; rot=0.000000; xmirror=0; smirror=0; clearance=25.0mil; + ha:flags { + clearline=1 + } + + li:thermal { + } + + ha:attributes { + term=1 + } + } + ha:padstack_ref.1259 { + proto=1; x=36.83mm; y=1.525in; rot=0.000000; xmirror=0; smirror=0; clearance=25.0mil; + ha:flags { + clearline=1 + } + + li:thermal { + li:3 { + on + diag + round + noshape + } + } + + ha:attributes { + term=2 + } + } + } + li:layers { + + ha:top-silk { + lid=0 + ha:combining { } + + li:objects { + ha:line.1235 { + x1=1.57in; y1=1.525in; x2=1.61in; y2=1.525in; thickness=10.0mil; clearance=0.0; + } + ha:line.1238 { + x1=1.09in; y1=1.525in; x2=1.13in; y2=1.525in; thickness=10.0mil; clearance=0.0; + } + ha:line.1241 { + x1=1.11in; y1=1.505in; x2=1.11in; y2=39.243mm; thickness=10.0mil; clearance=0.0; + } + ha:arc.1244 { + x=1.35in; y=1.525in; width=200.0mil; height=200.0mil; astart=0; adelta=360; thickness=10.0mil; clearance=0.0; + } + ha:text.1245 { + string=%a.parent.refdes%; x=1.31in; y=31.242mm; scale=100; fid=0; + ha:flags { + dyntext=1 + floater=1 + } + rot = 0.000000 + } + } + ha:type { + silk = 1 + top = 1 + } + } + + ha:subc-aux { + lid=1 + ha:combining { } + + li:objects { + ha:line.1246 { + x1=1.35in; y1=1.525in; x2=1.35in; y2=1.525in; thickness=0.1mm; clearance=0.0; + ha:attributes { + subc-role=pnp-origin + } + } + ha:line.1249 { + x1=31.75mm; y1=1.525in; x2=31.75mm; y2=1.525in; thickness=0.1mm; clearance=0.0; + ha:attributes { + subc-role=origin + } + } + ha:line.1252 { + x1=31.75mm; y1=1.525in; x2=32.75mm; y2=1.525in; thickness=0.1mm; clearance=0.0; + ha:attributes { + subc-role=x + } + } + ha:line.1255 { + x1=31.75mm; y1=1.525in; x2=31.75mm; y2=39.735mm; thickness=0.1mm; clearance=0.0; + ha:attributes { + subc-role=y + } + } + } + ha:type { + top = 1 + misc = 1 + virtual = 1 + } + } + } + } + uid = 2YrIDHgdUiD93dfM91oAAAAL + } + ha:subc.1261 { + ha:attributes { + value=1*2 + footprint=connector(1,2) + refdes=J1 + } + ha:data { + li:padstack_prototypes { + + ha:ps_proto_v6.0 { + hdia=0.999998mm; hplated=1; htop=0; hbottom=0; + li:shape { + + ha:ps_shape_v4 { + ha:combining { } + ha:layer_mask { + copper = 1 + top = 1 + } + clearance=0.0 + li:ps_poly { + -40.0mil + -40.0mil + 40.0mil + -40.0mil + 40.0mil + 40.0mil + -40.0mil + 40.0mil + } + } + + ha:ps_shape_v4 { + ha:combining { } + ha:layer_mask { + bottom = 1 + copper = 1 + } + clearance=0.0 + li:ps_poly { + -40.0mil + -40.0mil + 40.0mil + -40.0mil + 40.0mil + 40.0mil + -40.0mil + 40.0mil + } + } + + ha:ps_shape_v4 { + ha:combining { } + ha:layer_mask { + copper = 1 + intern = 1 + } + clearance=0.0 + li:ps_poly { + -40.0mil + -40.0mil + 40.0mil + -40.0mil + 40.0mil + 40.0mil + -40.0mil + 40.0mil + } + } + + ha:ps_shape_v4 { + ha:combining { sub=1; auto=1; } + ha:layer_mask { + top = 1 + mask = 1 + } + clearance=0.0 + li:ps_poly { + -43.0mil + -43.0mil + 43.0mil + -43.0mil + 43.0mil + 43.0mil + -43.0mil + 43.0mil + } + } + + ha:ps_shape_v4 { + ha:combining { sub=1; auto=1; } + ha:layer_mask { + bottom = 1 + mask = 1 + } + clearance=0.0 + li:ps_poly { + -43.0mil + -43.0mil + 43.0mil + -43.0mil + 43.0mil + 43.0mil + -43.0mil + 43.0mil + } + } + } + } + + ha:ps_proto_v6.1 { + hdia=0.999998mm; hplated=1; htop=0; hbottom=0; + li:shape { + + ha:ps_shape_v4 { + ha:ps_circ { x=0.0; y=0.0; dia=80.0mil; } + ha:combining { } + ha:layer_mask { + copper = 1 + top = 1 + } + clearance=0.0 + } + + ha:ps_shape_v4 { + ha:ps_circ { x=0.0; y=0.0; dia=80.0mil; } + ha:combining { } + ha:layer_mask { + bottom = 1 + copper = 1 + } + clearance=0.0 + } + + ha:ps_shape_v4 { + ha:ps_circ { x=0.0; y=0.0; dia=80.0mil; } + ha:combining { } + ha:layer_mask { + copper = 1 + intern = 1 + } + clearance=0.0 + } + + ha:ps_shape_v4 { + ha:ps_circ { x=0.0; y=0.0; dia=86.0mil; } + ha:combining { sub=1; auto=1; } + ha:layer_mask { + top = 1 + mask = 1 + } + clearance=0.0 + } + + ha:ps_shape_v4 { + ha:ps_circ { x=0.0; y=0.0; dia=86.0mil; } + ha:combining { sub=1; auto=1; } + ha:layer_mask { + bottom = 1 + mask = 1 + } + clearance=0.0 + } + } + } + } + + li:objects { + ha:padstack_ref.1293 { + proto=0; x=975.0mil; y=46.355mm; rot=0.000000; xmirror=0; smirror=0; clearance=25.0mil; + ha:flags { + clearline=1 + } + + li:thermal { + } + + ha:attributes { + term=1 + } + } + ha:padstack_ref.1294 { + proto=1; x=975.0mil; y=48.895mm; rot=0.000000; xmirror=0; smirror=0; clearance=25.0mil; + ha:flags { + clearline=1 + } + + li:thermal { + li:3 { + on + round + noshape + } + } + + ha:attributes { + term=2 + } + } + } + li:layers { + + ha:top-silk { + lid=0 + ha:combining { } + + li:objects { + ha:line.1262 { + x1=925.0mil; y1=45.085mm; x2=925.0mil; y2=1.975in; thickness=10.0mil; clearance=0.0; + } + ha:line.1265 { + x1=925.0mil; y1=45.085mm; x2=26.035mm; y2=45.085mm; thickness=10.0mil; clearance=0.0; + } + ha:line.1268 { + x1=26.035mm; y1=1.975in; x2=925.0mil; y2=1.975in; thickness=10.0mil; clearance=0.0; + } + ha:line.1271 { + x1=26.035mm; y1=1.975in; x2=26.035mm; y2=45.085mm; thickness=10.0mil; clearance=0.0; + } + ha:line.1274 { + x1=925.0mil; y1=47.625mm; x2=26.035mm; y2=47.625mm; thickness=10.0mil; clearance=0.0; + } + ha:line.1277 { + x1=26.035mm; y1=45.085mm; x2=26.035mm; y2=47.625mm; thickness=10.0mil; clearance=0.0; + } + ha:text.1280 { + string=%a.parent.refdes%; x=950.0mil; y=42.545mm; scale=100; fid=0; + ha:flags { + dyntext=1 + floater=1 + } + rot = 0.000000 + } + } + ha:type { + silk = 1 + top = 1 + } + } + + ha:subc-aux { + lid=1 + ha:combining { } + + li:objects { + ha:line.1281 { + x1=975.0mil; y1=47.625mm; x2=975.0mil; y2=47.625mm; thickness=0.1mm; clearance=0.0; + ha:attributes { + subc-role=pnp-origin + } + } + ha:line.1284 { + x1=975.0mil; y1=46.355mm; x2=975.0mil; y2=46.355mm; thickness=0.1mm; clearance=0.0; + ha:attributes { + subc-role=origin + } + } + ha:line.1287 { + x1=975.0mil; y1=46.355mm; x2=975.0mil; y2=45.355mm; thickness=0.1mm; clearance=0.0; + ha:attributes { + subc-role=x + } + } + ha:line.1290 { + x1=975.0mil; y1=46.355mm; x2=23.765mm; y2=46.355mm; thickness=0.1mm; clearance=0.0; + ha:attributes { + subc-role=y + } + } + } + ha:type { + top = 1 + misc = 1 + virtual = 1 + } + } + } + } + uid = 2YrIDHgdUiD93dfM91oAAAAN + } + ha:subc.1296 { + ha:attributes { + value=1*2 + footprint=connector(1,2) + refdes=J2 + } + ha:data { + li:padstack_prototypes { + + ha:ps_proto_v6.0 { + hdia=0.999998mm; hplated=1; htop=0; hbottom=0; + li:shape { + + ha:ps_shape_v4 { + ha:combining { } + ha:layer_mask { + copper = 1 + top = 1 + } + clearance=0.0 + li:ps_poly { + -40.0mil + -40.0mil + 40.0mil + -40.0mil + 40.0mil + 40.0mil + -40.0mil + 40.0mil + } + } + + ha:ps_shape_v4 { + ha:combining { } + ha:layer_mask { + bottom = 1 + copper = 1 + } + clearance=0.0 + li:ps_poly { + -40.0mil + -40.0mil + 40.0mil + -40.0mil + 40.0mil + 40.0mil + -40.0mil + 40.0mil + } + } + + ha:ps_shape_v4 { + ha:combining { } + ha:layer_mask { + copper = 1 + intern = 1 + } + clearance=0.0 + li:ps_poly { + -40.0mil + -40.0mil + 40.0mil + -40.0mil + 40.0mil + 40.0mil + -40.0mil + 40.0mil + } + } + + ha:ps_shape_v4 { + ha:combining { sub=1; auto=1; } + ha:layer_mask { + top = 1 + mask = 1 + } + clearance=0.0 + li:ps_poly { + -43.0mil + -43.0mil + 43.0mil + -43.0mil + 43.0mil + 43.0mil + -43.0mil + 43.0mil + } + } + + ha:ps_shape_v4 { + ha:combining { sub=1; auto=1; } + ha:layer_mask { + bottom = 1 + mask = 1 + } + clearance=0.0 + li:ps_poly { + -43.0mil + -43.0mil + 43.0mil + -43.0mil + 43.0mil + 43.0mil + -43.0mil + 43.0mil + } + } + } + } + + ha:ps_proto_v6.1 { + hdia=0.999998mm; hplated=1; htop=0; hbottom=0; + li:shape { + + ha:ps_shape_v4 { + ha:ps_circ { x=0.0; y=0.0; dia=80.0mil; } + ha:combining { } + ha:layer_mask { + copper = 1 + top = 1 + } + clearance=0.0 + } + + ha:ps_shape_v4 { + ha:ps_circ { x=0.0; y=0.0; dia=80.0mil; } + ha:combining { } + ha:layer_mask { + bottom = 1 + copper = 1 + } + clearance=0.0 + } + + ha:ps_shape_v4 { + ha:ps_circ { x=0.0; y=0.0; dia=80.0mil; } + ha:combining { } + ha:layer_mask { + copper = 1 + intern = 1 + } + clearance=0.0 + } + + ha:ps_shape_v4 { + ha:ps_circ { x=0.0; y=0.0; dia=86.0mil; } + ha:combining { sub=1; auto=1; } + ha:layer_mask { + top = 1 + mask = 1 + } + clearance=0.0 + } + + ha:ps_shape_v4 { + ha:ps_circ { x=0.0; y=0.0; dia=86.0mil; } + ha:combining { sub=1; auto=1; } + ha:layer_mask { + bottom = 1 + mask = 1 + } + clearance=0.0 + } + } + } + } + + li:objects { + ha:padstack_ref.1328 { + proto=0; x=60.96mm; y=46.99mm; rot=0.000000; xmirror=0; smirror=0; clearance=25.0mil; + ha:flags { + clearline=1 + } + + li:thermal { + } + + ha:attributes { + term=1 + } + } + ha:padstack_ref.1329 { + proto=1; x=60.96mm; y=49.53mm; rot=0.000000; xmirror=0; smirror=0; clearance=25.0mil; + ha:flags { + clearline=1 + } + + li:thermal { + li:3 { + on + diag + round + noshape + } + } + + ha:attributes { + term=2 + } + } + } + li:layers { + + ha:top-silk { + lid=0 + ha:combining { } + + li:objects { + ha:line.1297 { + x1=2.35in; y1=1.8in; x2=2.35in; y2=2.0in; thickness=10.0mil; clearance=0.0; + } + ha:line.1300 { + x1=2.35in; y1=1.8in; x2=2.45in; y2=1.8in; thickness=10.0mil; clearance=0.0; + } + ha:line.1303 { + x1=2.45in; y1=2.0in; x2=2.35in; y2=2.0in; thickness=10.0mil; clearance=0.0; + } + ha:line.1306 { + x1=2.45in; y1=2.0in; x2=2.45in; y2=1.8in; thickness=10.0mil; clearance=0.0; + } + ha:line.1309 { + x1=2.35in; y1=1.9in; x2=2.45in; y2=1.9in; thickness=10.0mil; clearance=0.0; + } + ha:line.1312 { + x1=2.45in; y1=1.8in; x2=2.45in; y2=1.9in; thickness=10.0mil; clearance=0.0; + } + ha:text.1315 { + string=%a.parent.refdes%; x=60.325mm; y=43.18mm; scale=100; fid=0; + ha:flags { + dyntext=1 + floater=1 + } + rot = 0.000000 + } + } + ha:type { + silk = 1 + top = 1 + } + } + + ha:subc-aux { + lid=1 + ha:combining { } + + li:objects { + ha:line.1316 { + x1=60.96mm; y1=1.9in; x2=60.96mm; y2=1.9in; thickness=0.1mm; clearance=0.0; + ha:attributes { + subc-role=pnp-origin + } + } + ha:line.1319 { + x1=60.96mm; y1=46.99mm; x2=60.96mm; y2=46.99mm; thickness=0.1mm; clearance=0.0; + ha:attributes { + subc-role=origin + } + } + ha:line.1322 { + x1=60.96mm; y1=46.99mm; x2=60.96mm; y2=45.99mm; thickness=0.1mm; clearance=0.0; + ha:attributes { + subc-role=x + } + } + ha:line.1325 { + x1=60.96mm; y1=46.99mm; x2=59.96mm; y2=46.99mm; thickness=0.1mm; clearance=0.0; + ha:attributes { + subc-role=y + } + } + } + ha:type { + top = 1 + misc = 1 + virtual = 1 + } + } + } + } + uid = 2YrIDHgdUiD93dfM91oAAAAN + } + ha:subc.1331 { + ha:attributes { + value=acy200 + footprint=acy(200) + refdes=C1 + } + ha:data { + li:padstack_prototypes { + + ha:ps_proto_v6.0 { + hdia=0.999998mm; hplated=1; htop=0; hbottom=0; + li:shape { + + ha:ps_shape_v4 { + ha:combining { } + ha:layer_mask { + copper = 1 + top = 1 + } + clearance=0.0 + li:ps_poly { + -40.0mil + -40.0mil + 40.0mil + -40.0mil + 40.0mil + 40.0mil + -40.0mil + 40.0mil + } + } + + ha:ps_shape_v4 { + ha:combining { } + ha:layer_mask { + bottom = 1 + copper = 1 + } + clearance=0.0 + li:ps_poly { + -40.0mil + -40.0mil + 40.0mil + -40.0mil + 40.0mil + 40.0mil + -40.0mil + 40.0mil + } + } + + ha:ps_shape_v4 { + ha:combining { } + ha:layer_mask { + copper = 1 + intern = 1 + } + clearance=0.0 + li:ps_poly { + -40.0mil + -40.0mil + 40.0mil + -40.0mil + 40.0mil + 40.0mil + -40.0mil + 40.0mil + } + } + + ha:ps_shape_v4 { + ha:combining { sub=1; auto=1; } + ha:layer_mask { + top = 1 + mask = 1 + } + clearance=0.0 + li:ps_poly { + -43.0mil + -43.0mil + 43.0mil + -43.0mil + 43.0mil + 43.0mil + -43.0mil + 43.0mil + } + } + + ha:ps_shape_v4 { + ha:combining { sub=1; auto=1; } + ha:layer_mask { + bottom = 1 + mask = 1 + } + clearance=0.0 + li:ps_poly { + -43.0mil + -43.0mil + 43.0mil + -43.0mil + 43.0mil + 43.0mil + -43.0mil + 43.0mil + } + } + } + } + + ha:ps_proto_v6.1 { + hdia=0.999998mm; hplated=1; htop=0; hbottom=0; + li:shape { + + ha:ps_shape_v4 { + ha:ps_circ { x=0.0; y=0.0; dia=80.0mil; } + ha:combining { } + ha:layer_mask { + copper = 1 + top = 1 + } + clearance=0.0 + } + + ha:ps_shape_v4 { + ha:ps_circ { x=0.0; y=0.0; dia=80.0mil; } + ha:combining { } + ha:layer_mask { + bottom = 1 + copper = 1 + } + clearance=0.0 + } + + ha:ps_shape_v4 { + ha:ps_circ { x=0.0; y=0.0; dia=80.0mil; } + ha:combining { } + ha:layer_mask { + copper = 1 + intern = 1 + } + clearance=0.0 + } + + ha:ps_shape_v4 { + ha:ps_circ { x=0.0; y=0.0; dia=86.0mil; } + ha:combining { sub=1; auto=1; } + ha:layer_mask { + top = 1 + mask = 1 + } + clearance=0.0 + } + + ha:ps_shape_v4 { + ha:ps_circ { x=0.0; y=0.0; dia=86.0mil; } + ha:combining { sub=1; auto=1; } + ha:layer_mask { + bottom = 1 + mask = 1 + } + clearance=0.0 + } + } + } + } + + li:objects { + ha:padstack_ref.1363 { + proto=0; x=38.1mm; y=53.975mm; rot=0.000000; xmirror=0; smirror=0; clearance=25.0mil; + ha:flags { + clearline=1 + } + + li:thermal { + } + + ha:attributes { + term=1 + } + } + ha:padstack_ref.1364 { + proto=1; x=43.18mm; y=53.975mm; rot=0.000000; xmirror=0; smirror=0; clearance=25.0mil; + ha:flags { + clearline=1 + } + + li:thermal { + li:3 { + on + diag + round + noshape + } + } + + ha:attributes { + term=2 + } + } + } + li:layers { + + ha:top-silk { + lid=0 + ha:combining { } + + li:objects { + ha:line.1332 { + x1=38.1mm; y1=53.975mm; x2=1.55in; y2=53.975mm; thickness=10.0mil; clearance=0.0; + } + ha:line.1335 { + x1=1.65in; y1=53.975mm; x2=43.18mm; y2=53.975mm; thickness=10.0mil; clearance=0.0; + } + ha:line.1338 { + x1=1.55in; y1=2.10834in; x2=1.55in; y2=54.398164mm; thickness=10.0mil; clearance=0.0; + } + ha:line.1341 { + x1=1.55in; y1=2.10834in; x2=1.65in; y2=2.10834in; thickness=10.0mil; clearance=0.0; + } + ha:line.1344 { + x1=1.65in; y1=54.398164mm; x2=1.55in; y2=54.398164mm; thickness=10.0mil; clearance=0.0; + } + ha:line.1347 { + x1=1.65in; y1=54.398164mm; x2=1.65in; y2=2.10834in; thickness=10.0mil; clearance=0.0; + } + ha:text.1350 { + string=%a.parent.refdes%; x=1.56in; y=50.927mm; scale=100; fid=0; + ha:flags { + dyntext=1 + floater=1 + } + rot = 0.000000 + } + } + ha:type { + silk = 1 + top = 1 + } + } + + ha:subc-aux { + lid=1 + ha:combining { } + + li:objects { + ha:line.1351 { + x1=1.6in; y1=53.975mm; x2=1.6in; y2=53.975mm; thickness=0.1mm; clearance=0.0; + ha:attributes { + subc-role=pnp-origin + } + } + ha:line.1354 { + x1=38.1mm; y1=53.975mm; x2=38.1mm; y2=53.975mm; thickness=0.1mm; clearance=0.0; + ha:attributes { + subc-role=origin + } + } + ha:line.1357 { + x1=38.1mm; y1=53.975mm; x2=39.1mm; y2=53.975mm; thickness=0.1mm; clearance=0.0; + ha:attributes { + subc-role=x + } + } + ha:line.1360 { + x1=38.1mm; y1=53.975mm; x2=38.1mm; y2=54.975mm; thickness=0.1mm; clearance=0.0; + ha:attributes { + subc-role=y + } + } + } + ha:type { + top = 1 + misc = 1 + virtual = 1 + } + } + } + } + uid = 2YrIDHgdUiD93dfM91oAAAAB + } + ha:subc.1366 { + ha:attributes { + value=acy200 + footprint=acy(200) + refdes=C2 + } + ha:data { + li:padstack_prototypes { + + ha:ps_proto_v6.0 { + hdia=0.999998mm; hplated=1; htop=0; hbottom=0; + li:shape { + + ha:ps_shape_v4 { + ha:combining { } + ha:layer_mask { + copper = 1 + top = 1 + } + clearance=0.0 + li:ps_poly { + -40.0mil + -40.0mil + 40.0mil + -40.0mil + 40.0mil + 40.0mil + -40.0mil + 40.0mil + } + } + + ha:ps_shape_v4 { + ha:combining { } + ha:layer_mask { + bottom = 1 + copper = 1 + } + clearance=0.0 + li:ps_poly { + -40.0mil + -40.0mil + 40.0mil + -40.0mil + 40.0mil + 40.0mil + -40.0mil + 40.0mil + } + } + + ha:ps_shape_v4 { + ha:combining { } + ha:layer_mask { + copper = 1 + intern = 1 + } + clearance=0.0 + li:ps_poly { + -40.0mil + -40.0mil + 40.0mil + -40.0mil + 40.0mil + 40.0mil + -40.0mil + 40.0mil + } + } + + ha:ps_shape_v4 { + ha:combining { sub=1; auto=1; } + ha:layer_mask { + top = 1 + mask = 1 + } + clearance=0.0 + li:ps_poly { + -43.0mil + -43.0mil + 43.0mil + -43.0mil + 43.0mil + 43.0mil + -43.0mil + 43.0mil + } + } + + ha:ps_shape_v4 { + ha:combining { sub=1; auto=1; } + ha:layer_mask { + bottom = 1 + mask = 1 + } + clearance=0.0 + li:ps_poly { + -43.0mil + -43.0mil + 43.0mil + -43.0mil + 43.0mil + 43.0mil + -43.0mil + 43.0mil + } + } + } + } + + ha:ps_proto_v6.1 { + hdia=0.999998mm; hplated=1; htop=0; hbottom=0; + li:shape { + + ha:ps_shape_v4 { + ha:ps_circ { x=0.0; y=0.0; dia=80.0mil; } + ha:combining { } + ha:layer_mask { + copper = 1 + top = 1 + } + clearance=0.0 + } + + ha:ps_shape_v4 { + ha:ps_circ { x=0.0; y=0.0; dia=80.0mil; } + ha:combining { } + ha:layer_mask { + bottom = 1 + copper = 1 + } + clearance=0.0 + } + + ha:ps_shape_v4 { + ha:ps_circ { x=0.0; y=0.0; dia=80.0mil; } + ha:combining { } + ha:layer_mask { + copper = 1 + intern = 1 + } + clearance=0.0 + } + + ha:ps_shape_v4 { + ha:ps_circ { x=0.0; y=0.0; dia=86.0mil; } + ha:combining { sub=1; auto=1; } + ha:layer_mask { + top = 1 + mask = 1 + } + clearance=0.0 + } + + ha:ps_shape_v4 { + ha:ps_circ { x=0.0; y=0.0; dia=86.0mil; } + ha:combining { sub=1; auto=1; } + ha:layer_mask { + bottom = 1 + mask = 1 + } + clearance=0.0 + } + } + } + } + + li:objects { + ha:padstack_ref.1398 { + proto=0; x=48.895mm; y=53.975mm; rot=0.000000; xmirror=0; smirror=0; clearance=25.0mil; + ha:flags { + clearline=1 + } + + li:thermal { + } + + ha:attributes { + term=1 + } + } + ha:padstack_ref.1399 { + proto=1; x=53.975mm; y=53.975mm; rot=0.000000; xmirror=0; smirror=0; clearance=25.0mil; + ha:flags { + clearline=1 + } + + li:thermal { + li:3 { + on + diag + round + noshape + } + } + + ha:attributes { + term=2 + } + } + } + li:layers { + + ha:top-silk { + lid=0 + ha:combining { } + + li:objects { + ha:line.1367 { + x1=48.895mm; y1=53.975mm; x2=1.975in; y2=53.975mm; thickness=10.0mil; clearance=0.0; + } + ha:line.1370 { + x1=2.075in; y1=53.975mm; x2=53.975mm; y2=53.975mm; thickness=10.0mil; clearance=0.0; + } + ha:line.1373 { + x1=1.975in; y1=2.10834in; x2=1.975in; y2=54.398164mm; thickness=10.0mil; clearance=0.0; + } + ha:line.1376 { + x1=1.975in; y1=2.10834in; x2=2.075in; y2=2.10834in; thickness=10.0mil; clearance=0.0; + } + ha:line.1379 { + x1=2.075in; y1=54.398164mm; x2=1.975in; y2=54.398164mm; thickness=10.0mil; clearance=0.0; + } + ha:line.1382 { + x1=2.075in; y1=54.398164mm; x2=2.075in; y2=2.10834in; thickness=10.0mil; clearance=0.0; + } + ha:text.1385 { + string=%a.parent.refdes%; x=1.985in; y=50.927mm; scale=100; fid=0; + ha:flags { + dyntext=1 + floater=1 + } + rot = 0.000000 + } + } + ha:type { + silk = 1 + top = 1 + } + } + + ha:subc-aux { + lid=1 + ha:combining { } + + li:objects { + ha:line.1386 { + x1=51.435mm; y1=53.975mm; x2=51.435mm; y2=53.975mm; thickness=0.1mm; clearance=0.0; + ha:flags { + selected=1 + } + + ha:attributes { + subc-role=pnp-origin + } + } + ha:line.1389 { + x1=48.895mm; y1=53.975mm; x2=48.895mm; y2=53.975mm; thickness=0.1mm; clearance=0.0; + ha:flags { + selected=1 + } + + ha:attributes { + subc-role=origin + } + } + ha:line.1392 { + x1=48.895mm; y1=53.975mm; x2=49.895mm; y2=53.975mm; thickness=0.1mm; clearance=0.0; + ha:flags { + selected=1 + } + + ha:attributes { + subc-role=x + } + } + ha:line.1395 { + x1=48.895mm; y1=53.975mm; x2=48.895mm; y2=54.975mm; thickness=0.1mm; clearance=0.0; + ha:flags { + selected=1 + } + + ha:attributes { + subc-role=y + } + } + } + ha:type { + top = 1 + misc = 1 + virtual = 1 + } + } + } + } + uid = 2YrIDHgdUiD93dfM91oAAAAB + } + ha:rat.1529 { + x1=53.975mm; y1=53.975mm; lgrp1=3; x2=60.96mm; y2=49.53mm; lgrp2=3; + } + ha:rat.1526 { + x1=43.18mm; y1=53.975mm; lgrp1=3; x2=53.975mm; y2=53.975mm; lgrp2=3; + } + ha:rat.1523 { + x1=43.18mm; y1=53.975mm; lgrp1=3; x2=46.99mm; y2=1.8in; lgrp2=3; + } + ha:rat.1520 { + x1=46.99mm; y1=1.8in; lgrp1=3; x2=36.83mm; y2=1.525in; lgrp2=3; + } + ha:rat.1517 { + x1=975.0mil; y1=48.895mm; lgrp1=3; x2=36.83mm; y2=1.525in; lgrp2=3; + } + } + li:layers { + + ha:top-sig { + lid=0 + group=3 + ha:combining { } + + li:objects { + } + color = {#8b2323} + } + + ha:bottom-sig { + lid=1 + group=10 + ha:combining { } + + li:objects { + ha:line.1433 { + x1=1.175in; y1=46.355mm; x2=31.75mm; y2=44.45mm; thickness=20.0mil; clearance=40.0mil; + ha:flags { + clearline=1 + } + } + ha:line.1436 { + x1=31.75mm; y1=44.45mm; x2=31.75mm; y2=1.525in; thickness=20.0mil; clearance=40.0mil; + ha:flags { + clearline=1 + } + } + ha:line.1472 { + x1=1.375in; y1=46.355mm; x2=38.1mm; y2=49.53mm; thickness=20.0mil; clearance=40.0mil; + ha:flags { + clearline=1 + } + } + ha:line.1475 { + x1=38.1mm; y1=49.53mm; x2=38.1mm; y2=53.975mm; thickness=20.0mil; clearance=40.0mil; + ha:flags { + clearline=1 + } + } + ha:line.1478 { + x1=975.0mil; y1=46.355mm; x2=1.725in; y2=46.355mm; thickness=20.0mil; clearance=40.0mil; + ha:flags { + clearline=1 + } + } + ha:line.1481 { + x1=1.725in; y1=46.355mm; x2=44.45mm; y2=1.8in; thickness=20.0mil; clearance=40.0mil; + ha:flags { + clearline=1 + } + } + ha:line.1505 { + x1=49.53mm; y1=1.8in; x2=2.35in; y2=1.8in; thickness=20.0mil; clearance=40.0mil; + ha:flags { + clearline=1 + } + } + ha:line.1508 { + x1=2.35in; y1=1.8in; x2=60.96mm; y2=46.99mm; thickness=20.0mil; clearance=40.0mil; + ha:flags { + clearline=1 + } + } + ha:line.1511 { + x1=49.53mm; y1=1.8in; x2=48.895mm; y2=46.355mm; thickness=20.0mil; clearance=40.0mil; + ha:flags { + clearline=1 + } + } + ha:line.1514 { + x1=48.895mm; y1=46.355mm; x2=48.895mm; y2=53.975mm; thickness=20.0mil; clearance=40.0mil; + ha:flags { + clearline=1 + } + } + } + color = {#3a5fcd} + } + + ha:top-gnd { + lid=2 + group=3 + ha:combining { } + + li:objects { + } + color = {#104e8b} + } + + ha:bottom-gnd { + lid=3 + group=10 + ha:combining { } + + li:objects { + } + color = {#cd3700} + } + + ha:int-sig2 { + lid=4 + group=7 + ha:combining { } + + li:objects { + } + color = {#548b54} + } + + ha:int-sig1 { + lid=5 + group=5 + ha:combining { } + + li:objects { + } + color = {#8b7355} + } + + ha:outline { + lid=6 + group=9 + ha:combining { } + + li:objects { + } + color = {#00868b} + } + + ha:bottom-silk { + lid=7 + group=12 + ha:combining { auto=1; } + + li:objects { + } + color = {#000000} + } + + ha:top-silk { + lid=8 + group=1 + ha:combining { auto=1; } + + li:objects { + } + color = {#000000} + } + + ha:top-paste { + lid=9 + group=0 + ha:combining { auto=1; } + + li:objects { + } + color = {#cd00cd} + } + + ha:top-mask { + lid=10 + group=2 + ha:combining { sub=1; auto=1; } + + li:objects { + } + color = {#ff0000} + } + + ha:bottom-mask { + lid=11 + group=11 + ha:combining { sub=1; auto=1; } + + li:objects { + } + color = {#ff0000} + } + + ha:bottom-paste { + lid=12 + group=13 + ha:combining { auto=1; } + + li:objects { + } + color = {#cd00cd} + } + + ha:slot-plated { + lid=13 + group=14 + ha:combining { auto=1; } + + li:objects { + } + color = {#8b7355} + } + + ha:slot-unplated { + lid=14 + group=15 + ha:combining { auto=1; } + + li:objects { + } + color = {#00868b} + } + } + } + + ha:netlists { + li:netlist_patch { + ha:add_conn { net=gnd; term=J1-2; } + ha:add_conn { net=gnd; term=C1-2; } + ha:add_conn { net=gnd; term=C2-2; } + ha:add_conn { net=gnd; term=J2-2; } + ha:add_conn { net=gnd; term=U1-2; } + ha:add_conn { net=gnd; term=C3-2; } + ha:add_conn { net=in; term=J1-1; } + ha:add_conn { net=in; term=C3-1; } + ha:add_conn { net=in; term=U1-1; } + ha:add_conn { net=in; term=C1-1; } + ha:add_conn { net=out; term=J2-1; } + ha:add_conn { net=out; term=U1-3; } + ha:add_conn { net=out; term=C2-1; } + } + } + ha:layer_stack { + li:groups { + ha:0 { + name = top_paste + ha:type { top=1; paste=1; } + li:layers { 9; } + } + ha:1 { + name = top_silk + ha:type { silk=1; top=1; } + li:layers { 8; } + } + ha:2 { + name = top_mask + ha:type { top=1; mask=1; } + li:layers { 10; } + } + ha:3 { + name = top_copper + ha:type { copper=1; top=1; } + li:layers { 0; 2; } + } + ha:4 { + name = grp_4 + ha:type { substrate=1; intern=1; } + li:layers { } + } + ha:5 { + name = Intern + ha:type { copper=1; intern=1; } + li:layers { 5; } + } + ha:6 { + name = grp_6 + ha:type { substrate=1; intern=1; } + li:layers { } + } + ha:7 { + name = Intern + ha:type { copper=1; intern=1; } + li:layers { 4; } + } + ha:8 { + name = grp_8 + ha:type { substrate=1; intern=1; } + li:layers { } + } + ha:9 { + name = global_outline + ha:type { boundary=1; } + li:layers { 6; } + purpose = uroute + } + ha:10 { + name = bottom_copper + ha:type { bottom=1; copper=1; } + li:layers { 1; 3; } + } + ha:11 { + name = bottom_mask + ha:type { bottom=1; mask=1; } + li:layers { 11; } + } + ha:12 { + name = bottom_silk + ha:type { silk=1; bottom=1; } + li:layers { 7; } + } + ha:13 { + name = bottom_paste + ha:type { bottom=1; paste=1; } + li:layers { 12; } + } + ha:14 { + name = pmech + ha:type { mech=1; } + li:layers { 13; } + purpose = proute + } + ha:15 { + name = umech + ha:type { mech=1; } + li:layers { 14; } + purpose = uroute + } + } + } + li:pcb-rnd-conf-v1 { + ha:overwrite { + ha:design { + text_font_id = 0 + text_scale = 100 + via_thickness = 2.2000 mm + via_drilling_hole = 1000.00 um + text_thickness = 0 + line_thickness = 20.00 mil + poly_isle_area = 200000000.0 + clearance = 20.00 mil + } + ha:editor { + line_refraction = 1 + buffer_number = 0 + draw_grid = false + grids_idx = 4 + grid = 25.00 mil + } + } + } +} Index: trunk/doc/tutorials/15_no_sch/step5.lht =================================================================== --- trunk/doc/tutorials/15_no_sch/step5.lht (nonexistent) +++ trunk/doc/tutorials/15_no_sch/step5.lht (revision 24781) @@ -0,0 +1,2201 @@ +ha:pcb-rnd-board-v6 { + + ha:attributes { + {PCB::grid::unit}=mil + } + + li:styles { + ha:Signal { + diameter = 2.0mm + text_scale = 0 + text_thick = 0.0 + thickness = 10.0mil + hole = 31.5mil + clearance = 20.0mil + } + ha:Power { + diameter = 2.2mm + text_scale = 0 + text_thick = 0.0 + thickness = 20.0mil + hole = 1.0mm + clearance = 20.0mil + } + ha:Fat { + diameter = 137.8mil + text_scale = 0 + text_thick = 0.0 + thickness = 80.0mil + hole = 47.24mil + clearance = 25.0mil + } + ha:Sig-tight { + diameter = 64.0mil + text_scale = 0 + text_thick = 0.0 + thickness = 10.0mil + hole = 31.5mil + clearance = 12.0mil + } + } + + ha:meta { + ha:size { + thermal_scale = 0.500000 + x = 127.0mm + y = 127.0mm + } + ha:grid { + spacing = 25.0mil + offs_x = 0.0 + offs_y = 0.0 + } + } + + ha:data { + li:padstack_prototypes { + } + + li:objects { + ha:subc.1158 { + ha:attributes { + value=TO220 + footprint=Transistor + refdes=U1 + } + ha:data { + li:padstack_prototypes { + + ha:ps_proto_v6.0 { + hdia=60.0mil; hplated=1; htop=0; hbottom=0; + li:shape { + + ha:ps_shape_v4 { + ha:combining { } + ha:layer_mask { + copper = 1 + top = 1 + } + clearance=0.0 + li:ps_poly { + -45.0mil + -45.0mil + 45.0mil + -45.0mil + 45.0mil + 45.0mil + -45.0mil + 45.0mil + } + } + + ha:ps_shape_v4 { + ha:combining { } + ha:layer_mask { + bottom = 1 + copper = 1 + } + clearance=0.0 + li:ps_poly { + -45.0mil + -45.0mil + 45.0mil + -45.0mil + 45.0mil + 45.0mil + -45.0mil + 45.0mil + } + } + + ha:ps_shape_v4 { + ha:combining { } + ha:layer_mask { + copper = 1 + intern = 1 + } + clearance=0.0 + li:ps_poly { + -45.0mil + -45.0mil + 45.0mil + -45.0mil + 45.0mil + 45.0mil + -45.0mil + 45.0mil + } + } + + ha:ps_shape_v4 { + ha:combining { sub=1; auto=1; } + ha:layer_mask { + top = 1 + mask = 1 + } + clearance=0.0 + li:ps_poly { + -48.0mil + -48.0mil + 48.0mil + -48.0mil + 48.0mil + 48.0mil + -48.0mil + 48.0mil + } + } + + ha:ps_shape_v4 { + ha:combining { sub=1; auto=1; } + ha:layer_mask { + bottom = 1 + mask = 1 + } + clearance=0.0 + li:ps_poly { + -48.0mil + -48.0mil + 48.0mil + -48.0mil + 48.0mil + 48.0mil + -48.0mil + 48.0mil + } + } + } + } + + ha:ps_proto_v6.1 { + hdia=60.0mil; hplated=1; htop=0; hbottom=0; + li:shape { + + ha:ps_shape_v4 { + ha:ps_circ { x=0.0; y=0.0; dia=90.0mil; } + ha:combining { } + ha:layer_mask { + copper = 1 + top = 1 + } + clearance=0.0 + } + + ha:ps_shape_v4 { + ha:ps_circ { x=0.0; y=0.0; dia=90.0mil; } + ha:combining { } + ha:layer_mask { + bottom = 1 + copper = 1 + } + clearance=0.0 + } + + ha:ps_shape_v4 { + ha:ps_circ { x=0.0; y=0.0; dia=90.0mil; } + ha:combining { } + ha:layer_mask { + copper = 1 + intern = 1 + } + clearance=0.0 + } + + ha:ps_shape_v4 { + ha:ps_circ { x=0.0; y=0.0; dia=96.0mil; } + ha:combining { sub=1; auto=1; } + ha:layer_mask { + top = 1 + mask = 1 + } + clearance=0.0 + } + + ha:ps_shape_v4 { + ha:ps_circ { x=0.0; y=0.0; dia=96.0mil; } + ha:combining { sub=1; auto=1; } + ha:layer_mask { + bottom = 1 + mask = 1 + } + clearance=0.0 + } + } + } + + ha:ps_proto_v6.2 { + hdia=130.0mil; hplated=1; htop=0; hbottom=0; + li:shape { + + ha:ps_shape_v4 { + ha:ps_circ { x=0.0; y=0.0; dia=150.0mil; } + ha:combining { } + ha:layer_mask { + copper = 1 + top = 1 + } + clearance=0.0 + } + + ha:ps_shape_v4 { + ha:ps_circ { x=0.0; y=0.0; dia=150.0mil; } + ha:combining { } + ha:layer_mask { + bottom = 1 + copper = 1 + } + clearance=0.0 + } + + ha:ps_shape_v4 { + ha:ps_circ { x=0.0; y=0.0; dia=150.0mil; } + ha:combining { } + ha:layer_mask { + copper = 1 + intern = 1 + } + clearance=0.0 + } + + ha:ps_shape_v4 { + ha:ps_circ { x=0.0; y=0.0; dia=156.0mil; } + ha:combining { sub=1; auto=1; } + ha:layer_mask { + top = 1 + mask = 1 + } + clearance=0.0 + } + + ha:ps_shape_v4 { + ha:ps_circ { x=0.0; y=0.0; dia=156.0mil; } + ha:combining { sub=1; auto=1; } + ha:layer_mask { + bottom = 1 + mask = 1 + } + clearance=0.0 + } + } + } + } + + li:objects { + ha:padstack_ref.1229 { + proto=0; x=44.45mm; y=1.8in; rot=0.000000; xmirror=0; smirror=0; clearance=15.0mil; + ha:flags { + clearline=1 + } + + li:thermal { + } + + ha:attributes { + term=1 + name=1 + } + } + ha:padstack_ref.1230 { + proto=1; x=46.99mm; y=1.8in; rot=0.000000; xmirror=0; smirror=0; clearance=15.0mil; + ha:flags { + clearline=1 + } + + li:thermal { + } + + ha:attributes { + term=2 + name=2 + } + } + ha:padstack_ref.1231 { + proto=1; x=49.53mm; y=1.8in; rot=0.000000; xmirror=0; smirror=0; clearance=15.0mil; + ha:flags { + clearline=1 + } + + li:thermal { + } + + ha:attributes { + term=3 + name=3 + } + } + ha:padstack_ref.1232 { + proto=2; x=46.99mm; y=1.13in; rot=0.000000; xmirror=0; smirror=0; clearance=15.0mil; + ha:flags { + clearline=1 + } + + li:thermal { + } + + ha:attributes { + term=4 + name=4 + } + } + } + li:layers { + + ha:top-silk { + lid=0 + ha:combining { } + + li:objects { + ha:line.1159 { + x1=44.45mm; y1=1.8in; x2=44.45mm; y2=1.62in; thickness=30.0mil; clearance=0.0; + } + ha:line.1162 { + x1=46.99mm; y1=1.8in; x2=46.99mm; y2=1.62in; thickness=30.0mil; clearance=0.0; + } + ha:line.1165 { + x1=49.53mm; y1=1.8in; x2=49.53mm; y2=1.62in; thickness=30.0mil; clearance=0.0; + } + ha:line.1168 { + x1=1.65in; y1=1.62in; x2=52.07mm; y2=1.62in; thickness=20.0mil; clearance=0.0; + } + ha:line.1171 { + x1=52.07mm; y1=1.62in; x2=52.07mm; y2=31.623mm; thickness=20.0mil; clearance=0.0; + } + ha:line.1174 { + x1=52.07mm; y1=31.623mm; x2=1.65in; y2=31.623mm; thickness=20.0mil; clearance=0.0; + } + ha:line.1177 { + x1=1.65in; y1=31.623mm; x2=1.65in; y2=1.62in; thickness=20.0mil; clearance=0.0; + } + ha:line.1180 { + x1=1.65in; y1=31.623mm; x2=52.07mm; y2=31.623mm; thickness=20.0mil; clearance=0.0; + } + ha:line.1183 { + x1=52.07mm; y1=31.623mm; x2=52.07mm; y2=1.12in; thickness=20.0mil; clearance=0.0; + } + ha:line.1186 { + x1=52.07mm; y1=1.12in; x2=51.689mm; y2=1.12in; thickness=20.0mil; clearance=0.0; + } + ha:line.1189 { + x1=51.689mm; y1=1.12in; x2=51.689mm; y2=26.67mm; thickness=20.0mil; clearance=0.0; + } + ha:line.1192 { + x1=51.689mm; y1=26.67mm; x2=52.07mm; y2=26.67mm; thickness=20.0mil; clearance=0.0; + } + ha:line.1195 { + x1=52.07mm; y1=26.67mm; x2=52.07mm; y2=1.01in; thickness=20.0mil; clearance=0.0; + } + ha:line.1198 { + x1=52.07mm; y1=1.01in; x2=1.65in; y2=1.01in; thickness=20.0mil; clearance=0.0; + } + ha:line.1201 { + x1=1.65in; y1=1.01in; x2=1.65in; y2=26.67mm; thickness=20.0mil; clearance=0.0; + } + ha:line.1204 { + x1=1.65in; y1=26.67mm; x2=1.665in; y2=26.67mm; thickness=20.0mil; clearance=0.0; + } + ha:line.1207 { + x1=1.665in; y1=26.67mm; x2=1.665in; y2=1.12in; thickness=20.0mil; clearance=0.0; + } + ha:line.1210 { + x1=1.665in; y1=1.12in; x2=1.65in; y2=1.12in; thickness=20.0mil; clearance=0.0; + } + ha:line.1213 { + x1=1.65in; y1=1.12in; x2=1.65in; y2=31.623mm; thickness=20.0mil; clearance=0.0; + } + ha:text.1216 { + string=%a.parent.refdes%; x=40.005mm; y=27.813mm; scale=100; fid=0; + ha:flags { + dyntext=1 + floater=1 + } + rot = 90.000000 + } + } + ha:type { + silk = 1 + top = 1 + } + } + + ha:subc-aux { + lid=1 + ha:combining { } + + li:objects { + ha:line.1217 { + x1=46.99mm; y1=1.6325in; x2=46.99mm; y2=1.6325in; thickness=0.1mm; clearance=0.0; + ha:attributes { + subc-role=pnp-origin + } + } + ha:line.1220 { + x1=46.99mm; y1=1.8in; x2=46.99mm; y2=1.8in; thickness=0.1mm; clearance=0.0; + ha:attributes { + subc-role=origin + } + } + ha:line.1223 { + x1=46.99mm; y1=1.8in; x2=46.99mm; y2=46.72mm; thickness=0.1mm; clearance=0.0; + ha:attributes { + subc-role=x + } + } + ha:line.1226 { + x1=46.99mm; y1=1.8in; x2=47.99mm; y2=1.8in; thickness=0.1mm; clearance=0.0; + ha:attributes { + subc-role=y + } + } + } + ha:type { + top = 1 + misc = 1 + virtual = 1 + } + } + } + } + uid = 2YrIDHgdUiD93dfM91oAAAAJ + } + ha:subc.1234 { + ha:attributes { + value=acy200 + footprint=rcy(200) + refdes=C3 + } + ha:data { + li:padstack_prototypes { + + ha:ps_proto_v6.0 { + hdia=0.999998mm; hplated=1; htop=0; hbottom=0; + li:shape { + + ha:ps_shape_v4 { + ha:combining { } + ha:layer_mask { + copper = 1 + top = 1 + } + clearance=0.0 + li:ps_poly { + -40.0mil + -40.0mil + 40.0mil + -40.0mil + 40.0mil + 40.0mil + -40.0mil + 40.0mil + } + } + + ha:ps_shape_v4 { + ha:combining { } + ha:layer_mask { + bottom = 1 + copper = 1 + } + clearance=0.0 + li:ps_poly { + -40.0mil + -40.0mil + 40.0mil + -40.0mil + 40.0mil + 40.0mil + -40.0mil + 40.0mil + } + } + + ha:ps_shape_v4 { + ha:combining { } + ha:layer_mask { + copper = 1 + intern = 1 + } + clearance=0.0 + li:ps_poly { + -40.0mil + -40.0mil + 40.0mil + -40.0mil + 40.0mil + 40.0mil + -40.0mil + 40.0mil + } + } + + ha:ps_shape_v4 { + ha:combining { sub=1; auto=1; } + ha:layer_mask { + top = 1 + mask = 1 + } + clearance=0.0 + li:ps_poly { + -43.0mil + -43.0mil + 43.0mil + -43.0mil + 43.0mil + 43.0mil + -43.0mil + 43.0mil + } + } + + ha:ps_shape_v4 { + ha:combining { sub=1; auto=1; } + ha:layer_mask { + bottom = 1 + mask = 1 + } + clearance=0.0 + li:ps_poly { + -43.0mil + -43.0mil + 43.0mil + -43.0mil + 43.0mil + 43.0mil + -43.0mil + 43.0mil + } + } + } + } + + ha:ps_proto_v6.1 { + hdia=0.999998mm; hplated=1; htop=0; hbottom=0; + li:shape { + + ha:ps_shape_v4 { + ha:ps_circ { x=0.0; y=0.0; dia=80.0mil; } + ha:combining { } + ha:layer_mask { + copper = 1 + top = 1 + } + clearance=0.0 + } + + ha:ps_shape_v4 { + ha:ps_circ { x=0.0; y=0.0; dia=80.0mil; } + ha:combining { } + ha:layer_mask { + bottom = 1 + copper = 1 + } + clearance=0.0 + } + + ha:ps_shape_v4 { + ha:ps_circ { x=0.0; y=0.0; dia=80.0mil; } + ha:combining { } + ha:layer_mask { + copper = 1 + intern = 1 + } + clearance=0.0 + } + + ha:ps_shape_v4 { + ha:ps_circ { x=0.0; y=0.0; dia=86.0mil; } + ha:combining { sub=1; auto=1; } + ha:layer_mask { + top = 1 + mask = 1 + } + clearance=0.0 + } + + ha:ps_shape_v4 { + ha:ps_circ { x=0.0; y=0.0; dia=86.0mil; } + ha:combining { sub=1; auto=1; } + ha:layer_mask { + bottom = 1 + mask = 1 + } + clearance=0.0 + } + } + } + } + + li:objects { + ha:padstack_ref.1258 { + proto=0; x=31.75mm; y=1.525in; rot=0.000000; xmirror=0; smirror=0; clearance=25.0mil; + ha:flags { + clearline=1 + } + + li:thermal { + } + + ha:attributes { + term=1 + } + } + ha:padstack_ref.1259 { + proto=1; x=36.83mm; y=1.525in; rot=0.000000; xmirror=0; smirror=0; clearance=25.0mil; + ha:flags { + clearline=1 + } + + li:thermal { + } + + ha:attributes { + term=2 + } + } + } + li:layers { + + ha:top-silk { + lid=0 + ha:combining { } + + li:objects { + ha:line.1235 { + x1=1.57in; y1=1.525in; x2=1.61in; y2=1.525in; thickness=10.0mil; clearance=0.0; + } + ha:line.1238 { + x1=1.09in; y1=1.525in; x2=1.13in; y2=1.525in; thickness=10.0mil; clearance=0.0; + } + ha:line.1241 { + x1=1.11in; y1=1.505in; x2=1.11in; y2=39.243mm; thickness=10.0mil; clearance=0.0; + } + ha:arc.1244 { + x=1.35in; y=1.525in; width=200.0mil; height=200.0mil; astart=0; adelta=360; thickness=10.0mil; clearance=0.0; + } + ha:text.1245 { + string=%a.parent.refdes%; x=1.31in; y=31.242mm; scale=100; fid=0; + ha:flags { + dyntext=1 + floater=1 + } + rot = 0.000000 + } + } + ha:type { + silk = 1 + top = 1 + } + } + + ha:subc-aux { + lid=1 + ha:combining { } + + li:objects { + ha:line.1246 { + x1=1.35in; y1=1.525in; x2=1.35in; y2=1.525in; thickness=0.1mm; clearance=0.0; + ha:attributes { + subc-role=pnp-origin + } + } + ha:line.1249 { + x1=31.75mm; y1=1.525in; x2=31.75mm; y2=1.525in; thickness=0.1mm; clearance=0.0; + ha:attributes { + subc-role=origin + } + } + ha:line.1252 { + x1=31.75mm; y1=1.525in; x2=32.75mm; y2=1.525in; thickness=0.1mm; clearance=0.0; + ha:attributes { + subc-role=x + } + } + ha:line.1255 { + x1=31.75mm; y1=1.525in; x2=31.75mm; y2=39.735mm; thickness=0.1mm; clearance=0.0; + ha:attributes { + subc-role=y + } + } + } + ha:type { + top = 1 + misc = 1 + virtual = 1 + } + } + } + } + uid = 2YrIDHgdUiD93dfM91oAAAAL + } + ha:subc.1261 { + ha:attributes { + value=1*2 + footprint=connector(1,2) + refdes=J1 + } + ha:data { + li:padstack_prototypes { + + ha:ps_proto_v6.0 { + hdia=0.999998mm; hplated=1; htop=0; hbottom=0; + li:shape { + + ha:ps_shape_v4 { + ha:combining { } + ha:layer_mask { + copper = 1 + top = 1 + } + clearance=0.0 + li:ps_poly { + -40.0mil + -40.0mil + 40.0mil + -40.0mil + 40.0mil + 40.0mil + -40.0mil + 40.0mil + } + } + + ha:ps_shape_v4 { + ha:combining { } + ha:layer_mask { + bottom = 1 + copper = 1 + } + clearance=0.0 + li:ps_poly { + -40.0mil + -40.0mil + 40.0mil + -40.0mil + 40.0mil + 40.0mil + -40.0mil + 40.0mil + } + } + + ha:ps_shape_v4 { + ha:combining { } + ha:layer_mask { + copper = 1 + intern = 1 + } + clearance=0.0 + li:ps_poly { + -40.0mil + -40.0mil + 40.0mil + -40.0mil + 40.0mil + 40.0mil + -40.0mil + 40.0mil + } + } + + ha:ps_shape_v4 { + ha:combining { sub=1; auto=1; } + ha:layer_mask { + top = 1 + mask = 1 + } + clearance=0.0 + li:ps_poly { + -43.0mil + -43.0mil + 43.0mil + -43.0mil + 43.0mil + 43.0mil + -43.0mil + 43.0mil + } + } + + ha:ps_shape_v4 { + ha:combining { sub=1; auto=1; } + ha:layer_mask { + bottom = 1 + mask = 1 + } + clearance=0.0 + li:ps_poly { + -43.0mil + -43.0mil + 43.0mil + -43.0mil + 43.0mil + 43.0mil + -43.0mil + 43.0mil + } + } + } + } + + ha:ps_proto_v6.1 { + hdia=0.999998mm; hplated=1; htop=0; hbottom=0; + li:shape { + + ha:ps_shape_v4 { + ha:ps_circ { x=0.0; y=0.0; dia=80.0mil; } + ha:combining { } + ha:layer_mask { + copper = 1 + top = 1 + } + clearance=0.0 + } + + ha:ps_shape_v4 { + ha:ps_circ { x=0.0; y=0.0; dia=80.0mil; } + ha:combining { } + ha:layer_mask { + bottom = 1 + copper = 1 + } + clearance=0.0 + } + + ha:ps_shape_v4 { + ha:ps_circ { x=0.0; y=0.0; dia=80.0mil; } + ha:combining { } + ha:layer_mask { + copper = 1 + intern = 1 + } + clearance=0.0 + } + + ha:ps_shape_v4 { + ha:ps_circ { x=0.0; y=0.0; dia=86.0mil; } + ha:combining { sub=1; auto=1; } + ha:layer_mask { + top = 1 + mask = 1 + } + clearance=0.0 + } + + ha:ps_shape_v4 { + ha:ps_circ { x=0.0; y=0.0; dia=86.0mil; } + ha:combining { sub=1; auto=1; } + ha:layer_mask { + bottom = 1 + mask = 1 + } + clearance=0.0 + } + } + } + } + + li:objects { + ha:padstack_ref.1293 { + proto=0; x=975.0mil; y=46.355mm; rot=0.000000; xmirror=0; smirror=0; clearance=25.0mil; + ha:flags { + clearline=1 + } + + li:thermal { + } + + ha:attributes { + term=1 + } + } + ha:padstack_ref.1294 { + proto=1; x=975.0mil; y=48.895mm; rot=0.000000; xmirror=0; smirror=0; clearance=25.0mil; + ha:flags { + clearline=1 + } + + li:thermal { + } + + ha:attributes { + term=2 + } + } + } + li:layers { + + ha:top-silk { + lid=0 + ha:combining { } + + li:objects { + ha:line.1262 { + x1=925.0mil; y1=45.085mm; x2=925.0mil; y2=1.975in; thickness=10.0mil; clearance=0.0; + } + ha:line.1265 { + x1=925.0mil; y1=45.085mm; x2=26.035mm; y2=45.085mm; thickness=10.0mil; clearance=0.0; + } + ha:line.1268 { + x1=26.035mm; y1=1.975in; x2=925.0mil; y2=1.975in; thickness=10.0mil; clearance=0.0; + } + ha:line.1271 { + x1=26.035mm; y1=1.975in; x2=26.035mm; y2=45.085mm; thickness=10.0mil; clearance=0.0; + } + ha:line.1274 { + x1=925.0mil; y1=47.625mm; x2=26.035mm; y2=47.625mm; thickness=10.0mil; clearance=0.0; + } + ha:line.1277 { + x1=26.035mm; y1=45.085mm; x2=26.035mm; y2=47.625mm; thickness=10.0mil; clearance=0.0; + } + ha:text.1280 { + string=%a.parent.refdes%; x=950.0mil; y=42.545mm; scale=100; fid=0; + ha:flags { + dyntext=1 + floater=1 + } + rot = 0.000000 + } + } + ha:type { + silk = 1 + top = 1 + } + } + + ha:subc-aux { + lid=1 + ha:combining { } + + li:objects { + ha:line.1281 { + x1=975.0mil; y1=47.625mm; x2=975.0mil; y2=47.625mm; thickness=0.1mm; clearance=0.0; + ha:attributes { + subc-role=pnp-origin + } + } + ha:line.1284 { + x1=975.0mil; y1=46.355mm; x2=975.0mil; y2=46.355mm; thickness=0.1mm; clearance=0.0; + ha:attributes { + subc-role=origin + } + } + ha:line.1287 { + x1=975.0mil; y1=46.355mm; x2=975.0mil; y2=45.355mm; thickness=0.1mm; clearance=0.0; + ha:attributes { + subc-role=x + } + } + ha:line.1290 { + x1=975.0mil; y1=46.355mm; x2=23.765mm; y2=46.355mm; thickness=0.1mm; clearance=0.0; + ha:attributes { + subc-role=y + } + } + } + ha:type { + top = 1 + misc = 1 + virtual = 1 + } + } + } + } + uid = 2YrIDHgdUiD93dfM91oAAAAN + } + ha:subc.1296 { + ha:attributes { + value=1*2 + footprint=connector(1,2) + refdes=J2 + } + ha:data { + li:padstack_prototypes { + + ha:ps_proto_v6.0 { + hdia=0.999998mm; hplated=1; htop=0; hbottom=0; + li:shape { + + ha:ps_shape_v4 { + ha:combining { } + ha:layer_mask { + copper = 1 + top = 1 + } + clearance=0.0 + li:ps_poly { + -40.0mil + -40.0mil + 40.0mil + -40.0mil + 40.0mil + 40.0mil + -40.0mil + 40.0mil + } + } + + ha:ps_shape_v4 { + ha:combining { } + ha:layer_mask { + bottom = 1 + copper = 1 + } + clearance=0.0 + li:ps_poly { + -40.0mil + -40.0mil + 40.0mil + -40.0mil + 40.0mil + 40.0mil + -40.0mil + 40.0mil + } + } + + ha:ps_shape_v4 { + ha:combining { } + ha:layer_mask { + copper = 1 + intern = 1 + } + clearance=0.0 + li:ps_poly { + -40.0mil + -40.0mil + 40.0mil + -40.0mil + 40.0mil + 40.0mil + -40.0mil + 40.0mil + } + } + + ha:ps_shape_v4 { + ha:combining { sub=1; auto=1; } + ha:layer_mask { + top = 1 + mask = 1 + } + clearance=0.0 + li:ps_poly { + -43.0mil + -43.0mil + 43.0mil + -43.0mil + 43.0mil + 43.0mil + -43.0mil + 43.0mil + } + } + + ha:ps_shape_v4 { + ha:combining { sub=1; auto=1; } + ha:layer_mask { + bottom = 1 + mask = 1 + } + clearance=0.0 + li:ps_poly { + -43.0mil + -43.0mil + 43.0mil + -43.0mil + 43.0mil + 43.0mil + -43.0mil + 43.0mil + } + } + } + } + + ha:ps_proto_v6.1 { + hdia=0.999998mm; hplated=1; htop=0; hbottom=0; + li:shape { + + ha:ps_shape_v4 { + ha:ps_circ { x=0.0; y=0.0; dia=80.0mil; } + ha:combining { } + ha:layer_mask { + copper = 1 + top = 1 + } + clearance=0.0 + } + + ha:ps_shape_v4 { + ha:ps_circ { x=0.0; y=0.0; dia=80.0mil; } + ha:combining { } + ha:layer_mask { + bottom = 1 + copper = 1 + } + clearance=0.0 + } + + ha:ps_shape_v4 { + ha:ps_circ { x=0.0; y=0.0; dia=80.0mil; } + ha:combining { } + ha:layer_mask { + copper = 1 + intern = 1 + } + clearance=0.0 + } + + ha:ps_shape_v4 { + ha:ps_circ { x=0.0; y=0.0; dia=86.0mil; } + ha:combining { sub=1; auto=1; } + ha:layer_mask { + top = 1 + mask = 1 + } + clearance=0.0 + } + + ha:ps_shape_v4 { + ha:ps_circ { x=0.0; y=0.0; dia=86.0mil; } + ha:combining { sub=1; auto=1; } + ha:layer_mask { + bottom = 1 + mask = 1 + } + clearance=0.0 + } + } + } + } + + li:objects { + ha:padstack_ref.1328 { + proto=0; x=60.96mm; y=46.99mm; rot=0.000000; xmirror=0; smirror=0; clearance=25.0mil; + ha:flags { + clearline=1 + } + + li:thermal { + } + + ha:attributes { + term=1 + } + } + ha:padstack_ref.1329 { + proto=1; x=60.96mm; y=49.53mm; rot=0.000000; xmirror=0; smirror=0; clearance=25.0mil; + ha:flags { + clearline=1 + } + + li:thermal { + } + + ha:attributes { + term=2 + } + } + } + li:layers { + + ha:top-silk { + lid=0 + ha:combining { } + + li:objects { + ha:line.1297 { + x1=2.35in; y1=1.8in; x2=2.35in; y2=2.0in; thickness=10.0mil; clearance=0.0; + } + ha:line.1300 { + x1=2.35in; y1=1.8in; x2=2.45in; y2=1.8in; thickness=10.0mil; clearance=0.0; + } + ha:line.1303 { + x1=2.45in; y1=2.0in; x2=2.35in; y2=2.0in; thickness=10.0mil; clearance=0.0; + } + ha:line.1306 { + x1=2.45in; y1=2.0in; x2=2.45in; y2=1.8in; thickness=10.0mil; clearance=0.0; + } + ha:line.1309 { + x1=2.35in; y1=1.9in; x2=2.45in; y2=1.9in; thickness=10.0mil; clearance=0.0; + } + ha:line.1312 { + x1=2.45in; y1=1.8in; x2=2.45in; y2=1.9in; thickness=10.0mil; clearance=0.0; + } + ha:text.1315 { + string=%a.parent.refdes%; x=60.325mm; y=43.18mm; scale=100; fid=0; + ha:flags { + dyntext=1 + floater=1 + } + rot = 0.000000 + } + } + ha:type { + silk = 1 + top = 1 + } + } + + ha:subc-aux { + lid=1 + ha:combining { } + + li:objects { + ha:line.1316 { + x1=60.96mm; y1=1.9in; x2=60.96mm; y2=1.9in; thickness=0.1mm; clearance=0.0; + ha:attributes { + subc-role=pnp-origin + } + } + ha:line.1319 { + x1=60.96mm; y1=46.99mm; x2=60.96mm; y2=46.99mm; thickness=0.1mm; clearance=0.0; + ha:attributes { + subc-role=origin + } + } + ha:line.1322 { + x1=60.96mm; y1=46.99mm; x2=60.96mm; y2=45.99mm; thickness=0.1mm; clearance=0.0; + ha:attributes { + subc-role=x + } + } + ha:line.1325 { + x1=60.96mm; y1=46.99mm; x2=59.96mm; y2=46.99mm; thickness=0.1mm; clearance=0.0; + ha:attributes { + subc-role=y + } + } + } + ha:type { + top = 1 + misc = 1 + virtual = 1 + } + } + } + } + uid = 2YrIDHgdUiD93dfM91oAAAAN + } + ha:subc.1331 { + ha:attributes { + value=acy200 + footprint=acy(200) + refdes=C1 + } + ha:data { + li:padstack_prototypes { + + ha:ps_proto_v6.0 { + hdia=0.999998mm; hplated=1; htop=0; hbottom=0; + li:shape { + + ha:ps_shape_v4 { + ha:combining { } + ha:layer_mask { + copper = 1 + top = 1 + } + clearance=0.0 + li:ps_poly { + -40.0mil + -40.0mil + 40.0mil + -40.0mil + 40.0mil + 40.0mil + -40.0mil + 40.0mil + } + } + + ha:ps_shape_v4 { + ha:combining { } + ha:layer_mask { + bottom = 1 + copper = 1 + } + clearance=0.0 + li:ps_poly { + -40.0mil + -40.0mil + 40.0mil + -40.0mil + 40.0mil + 40.0mil + -40.0mil + 40.0mil + } + } + + ha:ps_shape_v4 { + ha:combining { } + ha:layer_mask { + copper = 1 + intern = 1 + } + clearance=0.0 + li:ps_poly { + -40.0mil + -40.0mil + 40.0mil + -40.0mil + 40.0mil + 40.0mil + -40.0mil + 40.0mil + } + } + + ha:ps_shape_v4 { + ha:combining { sub=1; auto=1; } + ha:layer_mask { + top = 1 + mask = 1 + } + clearance=0.0 + li:ps_poly { + -43.0mil + -43.0mil + 43.0mil + -43.0mil + 43.0mil + 43.0mil + -43.0mil + 43.0mil + } + } + + ha:ps_shape_v4 { + ha:combining { sub=1; auto=1; } + ha:layer_mask { + bottom = 1 + mask = 1 + } + clearance=0.0 + li:ps_poly { + -43.0mil + -43.0mil + 43.0mil + -43.0mil + 43.0mil + 43.0mil + -43.0mil + 43.0mil + } + } + } + } + + ha:ps_proto_v6.1 { + hdia=0.999998mm; hplated=1; htop=0; hbottom=0; + li:shape { + + ha:ps_shape_v4 { + ha:ps_circ { x=0.0; y=0.0; dia=80.0mil; } + ha:combining { } + ha:layer_mask { + copper = 1 + top = 1 + } + clearance=0.0 + } + + ha:ps_shape_v4 { + ha:ps_circ { x=0.0; y=0.0; dia=80.0mil; } + ha:combining { } + ha:layer_mask { + bottom = 1 + copper = 1 + } + clearance=0.0 + } + + ha:ps_shape_v4 { + ha:ps_circ { x=0.0; y=0.0; dia=80.0mil; } + ha:combining { } + ha:layer_mask { + copper = 1 + intern = 1 + } + clearance=0.0 + } + + ha:ps_shape_v4 { + ha:ps_circ { x=0.0; y=0.0; dia=86.0mil; } + ha:combining { sub=1; auto=1; } + ha:layer_mask { + top = 1 + mask = 1 + } + clearance=0.0 + } + + ha:ps_shape_v4 { + ha:ps_circ { x=0.0; y=0.0; dia=86.0mil; } + ha:combining { sub=1; auto=1; } + ha:layer_mask { + bottom = 1 + mask = 1 + } + clearance=0.0 + } + } + } + } + + li:objects { + ha:padstack_ref.1363 { + proto=0; x=38.1mm; y=53.975mm; rot=0.000000; xmirror=0; smirror=0; clearance=25.0mil; + ha:flags { + clearline=1 + } + + li:thermal { + } + + ha:attributes { + term=1 + } + } + ha:padstack_ref.1364 { + proto=1; x=43.18mm; y=53.975mm; rot=0.000000; xmirror=0; smirror=0; clearance=25.0mil; + ha:flags { + clearline=1 + } + + li:thermal { + } + + ha:attributes { + term=2 + } + } + } + li:layers { + + ha:top-silk { + lid=0 + ha:combining { } + + li:objects { + ha:line.1332 { + x1=38.1mm; y1=53.975mm; x2=1.55in; y2=53.975mm; thickness=10.0mil; clearance=0.0; + } + ha:line.1335 { + x1=1.65in; y1=53.975mm; x2=43.18mm; y2=53.975mm; thickness=10.0mil; clearance=0.0; + } + ha:line.1338 { + x1=1.55in; y1=2.10834in; x2=1.55in; y2=54.398164mm; thickness=10.0mil; clearance=0.0; + } + ha:line.1341 { + x1=1.55in; y1=2.10834in; x2=1.65in; y2=2.10834in; thickness=10.0mil; clearance=0.0; + } + ha:line.1344 { + x1=1.65in; y1=54.398164mm; x2=1.55in; y2=54.398164mm; thickness=10.0mil; clearance=0.0; + } + ha:line.1347 { + x1=1.65in; y1=54.398164mm; x2=1.65in; y2=2.10834in; thickness=10.0mil; clearance=0.0; + } + ha:text.1350 { + string=%a.parent.refdes%; x=1.56in; y=50.927mm; scale=100; fid=0; + ha:flags { + dyntext=1 + floater=1 + } + rot = 0.000000 + } + } + ha:type { + silk = 1 + top = 1 + } + } + + ha:subc-aux { + lid=1 + ha:combining { } + + li:objects { + ha:line.1351 { + x1=1.6in; y1=53.975mm; x2=1.6in; y2=53.975mm; thickness=0.1mm; clearance=0.0; + ha:attributes { + subc-role=pnp-origin + } + } + ha:line.1354 { + x1=38.1mm; y1=53.975mm; x2=38.1mm; y2=53.975mm; thickness=0.1mm; clearance=0.0; + ha:attributes { + subc-role=origin + } + } + ha:line.1357 { + x1=38.1mm; y1=53.975mm; x2=39.1mm; y2=53.975mm; thickness=0.1mm; clearance=0.0; + ha:attributes { + subc-role=x + } + } + ha:line.1360 { + x1=38.1mm; y1=53.975mm; x2=38.1mm; y2=54.975mm; thickness=0.1mm; clearance=0.0; + ha:attributes { + subc-role=y + } + } + } + ha:type { + top = 1 + misc = 1 + virtual = 1 + } + } + } + } + uid = 2YrIDHgdUiD93dfM91oAAAAB + } + ha:subc.1366 { + ha:attributes { + value=acy200 + footprint=acy(200) + refdes=C2 + } + ha:data { + li:padstack_prototypes { + + ha:ps_proto_v6.0 { + hdia=0.999998mm; hplated=1; htop=0; hbottom=0; + li:shape { + + ha:ps_shape_v4 { + ha:combining { } + ha:layer_mask { + copper = 1 + top = 1 + } + clearance=0.0 + li:ps_poly { + -40.0mil + -40.0mil + 40.0mil + -40.0mil + 40.0mil + 40.0mil + -40.0mil + 40.0mil + } + } + + ha:ps_shape_v4 { + ha:combining { } + ha:layer_mask { + bottom = 1 + copper = 1 + } + clearance=0.0 + li:ps_poly { + -40.0mil + -40.0mil + 40.0mil + -40.0mil + 40.0mil + 40.0mil + -40.0mil + 40.0mil + } + } + + ha:ps_shape_v4 { + ha:combining { } + ha:layer_mask { + copper = 1 + intern = 1 + } + clearance=0.0 + li:ps_poly { + -40.0mil + -40.0mil + 40.0mil + -40.0mil + 40.0mil + 40.0mil + -40.0mil + 40.0mil + } + } + + ha:ps_shape_v4 { + ha:combining { sub=1; auto=1; } + ha:layer_mask { + top = 1 + mask = 1 + } + clearance=0.0 + li:ps_poly { + -43.0mil + -43.0mil + 43.0mil + -43.0mil + 43.0mil + 43.0mil + -43.0mil + 43.0mil + } + } + + ha:ps_shape_v4 { + ha:combining { sub=1; auto=1; } + ha:layer_mask { + bottom = 1 + mask = 1 + } + clearance=0.0 + li:ps_poly { + -43.0mil + -43.0mil + 43.0mil + -43.0mil + 43.0mil + 43.0mil + -43.0mil + 43.0mil + } + } + } + } + + ha:ps_proto_v6.1 { + hdia=0.999998mm; hplated=1; htop=0; hbottom=0; + li:shape { + + ha:ps_shape_v4 { + ha:ps_circ { x=0.0; y=0.0; dia=80.0mil; } + ha:combining { } + ha:layer_mask { + copper = 1 + top = 1 + } + clearance=0.0 + } + + ha:ps_shape_v4 { + ha:ps_circ { x=0.0; y=0.0; dia=80.0mil; } + ha:combining { } + ha:layer_mask { + bottom = 1 + copper = 1 + } + clearance=0.0 + } + + ha:ps_shape_v4 { + ha:ps_circ { x=0.0; y=0.0; dia=80.0mil; } + ha:combining { } + ha:layer_mask { + copper = 1 + intern = 1 + } + clearance=0.0 + } + + ha:ps_shape_v4 { + ha:ps_circ { x=0.0; y=0.0; dia=86.0mil; } + ha:combining { sub=1; auto=1; } + ha:layer_mask { + top = 1 + mask = 1 + } + clearance=0.0 + } + + ha:ps_shape_v4 { + ha:ps_circ { x=0.0; y=0.0; dia=86.0mil; } + ha:combining { sub=1; auto=1; } + ha:layer_mask { + bottom = 1 + mask = 1 + } + clearance=0.0 + } + } + } + } + + li:objects { + ha:padstack_ref.1398 { + proto=0; x=48.895mm; y=53.975mm; rot=0.000000; xmirror=0; smirror=0; clearance=25.0mil; + ha:flags { + clearline=1 + } + + li:thermal { + } + + ha:attributes { + term=1 + } + } + ha:padstack_ref.1399 { + proto=1; x=53.975mm; y=53.975mm; rot=0.000000; xmirror=0; smirror=0; clearance=25.0mil; + ha:flags { + clearline=1 + } + + li:thermal { + } + + ha:attributes { + term=2 + } + } + } + li:layers { + + ha:top-silk { + lid=0 + ha:combining { } + + li:objects { + ha:line.1367 { + x1=48.895mm; y1=53.975mm; x2=1.975in; y2=53.975mm; thickness=10.0mil; clearance=0.0; + } + ha:line.1370 { + x1=2.075in; y1=53.975mm; x2=53.975mm; y2=53.975mm; thickness=10.0mil; clearance=0.0; + } + ha:line.1373 { + x1=1.975in; y1=2.10834in; x2=1.975in; y2=54.398164mm; thickness=10.0mil; clearance=0.0; + } + ha:line.1376 { + x1=1.975in; y1=2.10834in; x2=2.075in; y2=2.10834in; thickness=10.0mil; clearance=0.0; + } + ha:line.1379 { + x1=2.075in; y1=54.398164mm; x2=1.975in; y2=54.398164mm; thickness=10.0mil; clearance=0.0; + } + ha:line.1382 { + x1=2.075in; y1=54.398164mm; x2=2.075in; y2=2.10834in; thickness=10.0mil; clearance=0.0; + } + ha:text.1385 { + string=%a.parent.refdes%; x=1.985in; y=50.927mm; scale=100; fid=0; + ha:flags { + dyntext=1 + floater=1 + } + rot = 0.000000 + } + } + ha:type { + silk = 1 + top = 1 + } + } + + ha:subc-aux { + lid=1 + ha:combining { } + + li:objects { + ha:line.1386 { + x1=51.435mm; y1=53.975mm; x2=51.435mm; y2=53.975mm; thickness=0.1mm; clearance=0.0; + ha:flags { + selected=1 + } + + ha:attributes { + subc-role=pnp-origin + } + } + ha:line.1389 { + x1=48.895mm; y1=53.975mm; x2=48.895mm; y2=53.975mm; thickness=0.1mm; clearance=0.0; + ha:flags { + selected=1 + } + + ha:attributes { + subc-role=origin + } + } + ha:line.1392 { + x1=48.895mm; y1=53.975mm; x2=49.895mm; y2=53.975mm; thickness=0.1mm; clearance=0.0; + ha:flags { + selected=1 + } + + ha:attributes { + subc-role=x + } + } + ha:line.1395 { + x1=48.895mm; y1=53.975mm; x2=48.895mm; y2=54.975mm; thickness=0.1mm; clearance=0.0; + ha:flags { + selected=1 + } + + ha:attributes { + subc-role=y + } + } + } + ha:type { + top = 1 + misc = 1 + virtual = 1 + } + } + } + } + uid = 2YrIDHgdUiD93dfM91oAAAAB + } + ha:rat.1517 { + x1=975.0mil; y1=48.895mm; lgrp1=3; x2=36.83mm; y2=1.525in; lgrp2=3; + } + ha:rat.1520 { + x1=46.99mm; y1=1.8in; lgrp1=3; x2=36.83mm; y2=1.525in; lgrp2=3; + } + ha:rat.1523 { + x1=43.18mm; y1=53.975mm; lgrp1=3; x2=46.99mm; y2=1.8in; lgrp2=3; + } + ha:rat.1526 { + x1=43.18mm; y1=53.975mm; lgrp1=3; x2=53.975mm; y2=53.975mm; lgrp2=3; + } + ha:rat.1529 { + x1=53.975mm; y1=53.975mm; lgrp1=3; x2=60.96mm; y2=49.53mm; lgrp2=3; + } + } + li:layers { + + ha:top-sig { + lid=0 + group=3 + ha:combining { } + + li:objects { + } + color = {#8b2323} + } + + ha:bottom-sig { + lid=1 + group=10 + ha:combining { } + + li:objects { + ha:line.1433 { + x1=1.175in; y1=46.355mm; x2=31.75mm; y2=44.45mm; thickness=20.0mil; clearance=40.0mil; + ha:flags { + clearline=1 + } + } + ha:line.1436 { + x1=31.75mm; y1=44.45mm; x2=31.75mm; y2=1.525in; thickness=20.0mil; clearance=40.0mil; + ha:flags { + clearline=1 + } + } + ha:line.1472 { + x1=1.375in; y1=46.355mm; x2=38.1mm; y2=49.53mm; thickness=20.0mil; clearance=40.0mil; + ha:flags { + clearline=1 + } + } + ha:line.1475 { + x1=38.1mm; y1=49.53mm; x2=38.1mm; y2=53.975mm; thickness=20.0mil; clearance=40.0mil; + ha:flags { + clearline=1 + } + } + ha:line.1478 { + x1=975.0mil; y1=46.355mm; x2=1.725in; y2=46.355mm; thickness=20.0mil; clearance=40.0mil; + ha:flags { + clearline=1 + } + } + ha:line.1481 { + x1=1.725in; y1=46.355mm; x2=44.45mm; y2=1.8in; thickness=20.0mil; clearance=40.0mil; + ha:flags { + clearline=1 + } + } + ha:line.1505 { + x1=49.53mm; y1=1.8in; x2=2.35in; y2=1.8in; thickness=20.0mil; clearance=40.0mil; + ha:flags { + clearline=1 + } + } + ha:line.1508 { + x1=2.35in; y1=1.8in; x2=60.96mm; y2=46.99mm; thickness=20.0mil; clearance=40.0mil; + ha:flags { + clearline=1 + } + } + ha:line.1511 { + x1=49.53mm; y1=1.8in; x2=48.895mm; y2=46.355mm; thickness=20.0mil; clearance=40.0mil; + ha:flags { + clearline=1 + } + } + ha:line.1514 { + x1=48.895mm; y1=46.355mm; x2=48.895mm; y2=53.975mm; thickness=20.0mil; clearance=40.0mil; + ha:flags { + clearline=1 + } + } + } + color = {#3a5fcd} + } + + ha:top-gnd { + lid=2 + group=3 + ha:combining { } + + li:objects { + } + color = {#104e8b} + } + + ha:bottom-gnd { + lid=3 + group=10 + ha:combining { } + + li:objects { + } + color = {#cd3700} + } + + ha:int-sig2 { + lid=4 + group=7 + ha:combining { } + + li:objects { + } + color = {#548b54} + } + + ha:int-sig1 { + lid=5 + group=5 + ha:combining { } + + li:objects { + } + color = {#8b7355} + } + + ha:outline { + lid=6 + group=9 + ha:combining { } + + li:objects { + } + color = {#00868b} + } + + ha:bottom-silk { + lid=7 + group=12 + ha:combining { auto=1; } + + li:objects { + } + color = {#000000} + } + + ha:top-silk { + lid=8 + group=1 + ha:combining { auto=1; } + + li:objects { + } + color = {#000000} + } + + ha:top-paste { + lid=9 + group=0 + ha:combining { auto=1; } + + li:objects { + } + color = {#cd00cd} + } + + ha:top-mask { + lid=10 + group=2 + ha:combining { sub=1; auto=1; } + + li:objects { + } + color = {#ff0000} + } + + ha:bottom-mask { + lid=11 + group=11 + ha:combining { sub=1; auto=1; } + + li:objects { + } + color = {#ff0000} + } + + ha:bottom-paste { + lid=12 + group=13 + ha:combining { auto=1; } + + li:objects { + } + color = {#cd00cd} + } + + ha:slot-plated { + lid=13 + group=14 + ha:combining { auto=1; } + + li:objects { + } + color = {#8b7355} + } + + ha:slot-unplated { + lid=14 + group=15 + ha:combining { auto=1; } + + li:objects { + } + color = {#00868b} + } + } + } + + + ha:netlists { + li:netlist_patch { + ha:add_conn { net=gnd; term=J1-2; } + ha:add_conn { net=gnd; term=C1-2; } + ha:add_conn { net=gnd; term=C2-2; } + ha:add_conn { net=gnd; term=J2-2; } + ha:add_conn { net=gnd; term=U1-2; } + ha:add_conn { net=gnd; term=C3-2; } + ha:add_conn { net=in; term=J1-1; } + ha:add_conn { net=in; term=C3-1; } + ha:add_conn { net=in; term=U1-1; } + ha:add_conn { net=in; term=C1-1; } + ha:add_conn { net=out; term=J2-1; } + ha:add_conn { net=out; term=U1-3; } + ha:add_conn { net=out; term=C2-1; } + } + } + ha:layer_stack { + li:groups { + ha:0 { + name = top_paste + ha:type { top=1; paste=1; } + li:layers { 9; } + } + ha:1 { + name = top_silk + ha:type { silk=1; top=1; } + li:layers { 8; } + } + ha:2 { + name = top_mask + ha:type { top=1; mask=1; } + li:layers { 10; } + } + ha:3 { + name = top_copper + ha:type { copper=1; top=1; } + li:layers { 0; 2; } + } + ha:4 { + name = grp_4 + ha:type { substrate=1; intern=1; } + li:layers { } + } + ha:5 { + name = Intern + ha:type { copper=1; intern=1; } + li:layers { 5; } + } + ha:6 { + name = grp_6 + ha:type { substrate=1; intern=1; } + li:layers { } + } + ha:7 { + name = Intern + ha:type { copper=1; intern=1; } + li:layers { 4; } + } + ha:8 { + name = grp_8 + ha:type { substrate=1; intern=1; } + li:layers { } + } + ha:9 { + name = global_outline + ha:type { boundary=1; } + li:layers { 6; } + purpose = uroute + } + ha:10 { + name = bottom_copper + ha:type { bottom=1; copper=1; } + li:layers { 1; 3; } + } + ha:11 { + name = bottom_mask + ha:type { bottom=1; mask=1; } + li:layers { 11; } + } + ha:12 { + name = bottom_silk + ha:type { silk=1; bottom=1; } + li:layers { 7; } + } + ha:13 { + name = bottom_paste + ha:type { bottom=1; paste=1; } + li:layers { 12; } + } + ha:14 { + name = pmech + ha:type { mech=1; } + li:layers { 13; } + purpose = proute + } + ha:15 { + name = umech + ha:type { mech=1; } + li:layers { 14; } + purpose = uroute + } + } + } + li:pcb-rnd-conf-v1 { + ha:overwrite { + ha:design { + text_font_id = 0 + text_scale = 100 + via_thickness = 2.2000 mm + via_drilling_hole = 1000.00 um + text_thickness = 0 + line_thickness = 20.00 mil + poly_isle_area = 200000000.0 + clearance = 20.00 mil + } + ha:editor { + line_refraction = 1 + buffer_number = 0 + draw_grid = false + grids_idx = 4 + grid = 25.00 mil + } + } + } +} Index: trunk/doc/tutorials/15_no_sch/step5.png =================================================================== Cannot display: file marked as a binary type. svn:mime-type = application/octet-stream Index: trunk/doc/tutorials/15_no_sch/step5.png =================================================================== --- trunk/doc/tutorials/15_no_sch/step5.png (nonexistent) +++ trunk/doc/tutorials/15_no_sch/step5.png (revision 24781) Property changes on: trunk/doc/tutorials/15_no_sch/step5.png ___________________________________________________________________ Added: svn:mime-type ## -0,0 +1 ## +application/octet-stream \ No newline at end of property Index: trunk/doc/tutorials/15_no_sch/step6.lht =================================================================== --- trunk/doc/tutorials/15_no_sch/step6.lht (nonexistent) +++ trunk/doc/tutorials/15_no_sch/step6.lht (revision 24781) @@ -0,0 +1,2234 @@ +ha:pcb-rnd-board-v6 { + + ha:attributes { + {PCB::grid::unit}=mil + } + + li:styles { + ha:Signal { + diameter = 2.0mm + text_scale = 0 + text_thick = 0.0 + thickness = 10.0mil + hole = 31.5mil + clearance = 20.0mil + } + ha:Power { + diameter = 2.2mm + text_scale = 0 + text_thick = 0.0 + thickness = 20.0mil + hole = 1.0mm + clearance = 20.0mil + } + ha:Fat { + diameter = 137.8mil + text_scale = 0 + text_thick = 0.0 + thickness = 80.0mil + hole = 47.24mil + clearance = 25.0mil + } + ha:Sig-tight { + diameter = 64.0mil + text_scale = 0 + text_thick = 0.0 + thickness = 10.0mil + hole = 31.5mil + clearance = 12.0mil + } + } + + ha:meta { + ha:size { + thermal_scale = 0.500000 + x = 127.0mm + y = 127.0mm + } + ha:grid { + spacing = 25.0mil + offs_x = 0.0 + offs_y = 0.0 + } + } + + ha:data { + li:padstack_prototypes { + } + + li:objects { + ha:subc.1158 { + ha:attributes { + value=TO220 + footprint=Transistor + refdes=U1 + } + ha:data { + li:padstack_prototypes { + + ha:ps_proto_v6.0 { + hdia=60.0mil; hplated=1; htop=0; hbottom=0; + li:shape { + + ha:ps_shape_v4 { + ha:combining { } + ha:layer_mask { + copper = 1 + top = 1 + } + clearance=0.0 + li:ps_poly { + -45.0mil + -45.0mil + 45.0mil + -45.0mil + 45.0mil + 45.0mil + -45.0mil + 45.0mil + } + } + + ha:ps_shape_v4 { + ha:combining { } + ha:layer_mask { + bottom = 1 + copper = 1 + } + clearance=0.0 + li:ps_poly { + -45.0mil + -45.0mil + 45.0mil + -45.0mil + 45.0mil + 45.0mil + -45.0mil + 45.0mil + } + } + + ha:ps_shape_v4 { + ha:combining { } + ha:layer_mask { + copper = 1 + intern = 1 + } + clearance=0.0 + li:ps_poly { + -45.0mil + -45.0mil + 45.0mil + -45.0mil + 45.0mil + 45.0mil + -45.0mil + 45.0mil + } + } + + ha:ps_shape_v4 { + ha:combining { sub=1; auto=1; } + ha:layer_mask { + top = 1 + mask = 1 + } + clearance=0.0 + li:ps_poly { + -48.0mil + -48.0mil + 48.0mil + -48.0mil + 48.0mil + 48.0mil + -48.0mil + 48.0mil + } + } + + ha:ps_shape_v4 { + ha:combining { sub=1; auto=1; } + ha:layer_mask { + bottom = 1 + mask = 1 + } + clearance=0.0 + li:ps_poly { + -48.0mil + -48.0mil + 48.0mil + -48.0mil + 48.0mil + 48.0mil + -48.0mil + 48.0mil + } + } + } + } + + ha:ps_proto_v6.1 { + hdia=60.0mil; hplated=1; htop=0; hbottom=0; + li:shape { + + ha:ps_shape_v4 { + ha:ps_circ { x=0.0; y=0.0; dia=90.0mil; } + ha:combining { } + ha:layer_mask { + copper = 1 + top = 1 + } + clearance=0.0 + } + + ha:ps_shape_v4 { + ha:ps_circ { x=0.0; y=0.0; dia=90.0mil; } + ha:combining { } + ha:layer_mask { + bottom = 1 + copper = 1 + } + clearance=0.0 + } + + ha:ps_shape_v4 { + ha:ps_circ { x=0.0; y=0.0; dia=90.0mil; } + ha:combining { } + ha:layer_mask { + copper = 1 + intern = 1 + } + clearance=0.0 + } + + ha:ps_shape_v4 { + ha:ps_circ { x=0.0; y=0.0; dia=96.0mil; } + ha:combining { sub=1; auto=1; } + ha:layer_mask { + top = 1 + mask = 1 + } + clearance=0.0 + } + + ha:ps_shape_v4 { + ha:ps_circ { x=0.0; y=0.0; dia=96.0mil; } + ha:combining { sub=1; auto=1; } + ha:layer_mask { + bottom = 1 + mask = 1 + } + clearance=0.0 + } + } + } + + ha:ps_proto_v6.2 { + hdia=130.0mil; hplated=1; htop=0; hbottom=0; + li:shape { + + ha:ps_shape_v4 { + ha:ps_circ { x=0.0; y=0.0; dia=150.0mil; } + ha:combining { } + ha:layer_mask { + copper = 1 + top = 1 + } + clearance=0.0 + } + + ha:ps_shape_v4 { + ha:ps_circ { x=0.0; y=0.0; dia=150.0mil; } + ha:combining { } + ha:layer_mask { + bottom = 1 + copper = 1 + } + clearance=0.0 + } + + ha:ps_shape_v4 { + ha:ps_circ { x=0.0; y=0.0; dia=150.0mil; } + ha:combining { } + ha:layer_mask { + copper = 1 + intern = 1 + } + clearance=0.0 + } + + ha:ps_shape_v4 { + ha:ps_circ { x=0.0; y=0.0; dia=156.0mil; } + ha:combining { sub=1; auto=1; } + ha:layer_mask { + top = 1 + mask = 1 + } + clearance=0.0 + } + + ha:ps_shape_v4 { + ha:ps_circ { x=0.0; y=0.0; dia=156.0mil; } + ha:combining { sub=1; auto=1; } + ha:layer_mask { + bottom = 1 + mask = 1 + } + clearance=0.0 + } + } + } + } + + li:objects { + ha:padstack_ref.1229 { + proto=0; x=44.45mm; y=1.8in; rot=0.000000; xmirror=0; smirror=0; clearance=15.0mil; + ha:flags { + clearline=1 + } + + li:thermal { + } + + ha:attributes { + term=1 + name=1 + } + } + ha:padstack_ref.1230 { + proto=1; x=46.99mm; y=1.8in; rot=0.000000; xmirror=0; smirror=0; clearance=15.0mil; + ha:flags { + clearline=1 + } + + li:thermal { + li:3 { + on + diag + round + noshape + } + } + + ha:attributes { + term=2 + name=2 + } + } + ha:padstack_ref.1231 { + proto=1; x=49.53mm; y=1.8in; rot=0.000000; xmirror=0; smirror=0; clearance=15.0mil; + ha:flags { + clearline=1 + } + + li:thermal { + } + + ha:attributes { + term=3 + name=3 + } + } + ha:padstack_ref.1232 { + proto=2; x=46.99mm; y=1.13in; rot=0.000000; xmirror=0; smirror=0; clearance=15.0mil; + ha:flags { + clearline=1 + } + + li:thermal { + } + + ha:attributes { + term=4 + name=4 + } + } + } + li:layers { + + ha:top-silk { + lid=0 + ha:combining { } + + li:objects { + ha:line.1159 { + x1=44.45mm; y1=1.8in; x2=44.45mm; y2=1.62in; thickness=30.0mil; clearance=0.0; + } + ha:line.1162 { + x1=46.99mm; y1=1.8in; x2=46.99mm; y2=1.62in; thickness=30.0mil; clearance=0.0; + } + ha:line.1165 { + x1=49.53mm; y1=1.8in; x2=49.53mm; y2=1.62in; thickness=30.0mil; clearance=0.0; + } + ha:line.1168 { + x1=1.65in; y1=1.62in; x2=52.07mm; y2=1.62in; thickness=20.0mil; clearance=0.0; + } + ha:line.1171 { + x1=52.07mm; y1=1.62in; x2=52.07mm; y2=31.623mm; thickness=20.0mil; clearance=0.0; + } + ha:line.1174 { + x1=52.07mm; y1=31.623mm; x2=1.65in; y2=31.623mm; thickness=20.0mil; clearance=0.0; + } + ha:line.1177 { + x1=1.65in; y1=31.623mm; x2=1.65in; y2=1.62in; thickness=20.0mil; clearance=0.0; + } + ha:line.1180 { + x1=1.65in; y1=31.623mm; x2=52.07mm; y2=31.623mm; thickness=20.0mil; clearance=0.0; + } + ha:line.1183 { + x1=52.07mm; y1=31.623mm; x2=52.07mm; y2=1.12in; thickness=20.0mil; clearance=0.0; + } + ha:line.1186 { + x1=52.07mm; y1=1.12in; x2=51.689mm; y2=1.12in; thickness=20.0mil; clearance=0.0; + } + ha:line.1189 { + x1=51.689mm; y1=1.12in; x2=51.689mm; y2=26.67mm; thickness=20.0mil; clearance=0.0; + } + ha:line.1192 { + x1=51.689mm; y1=26.67mm; x2=52.07mm; y2=26.67mm; thickness=20.0mil; clearance=0.0; + } + ha:line.1195 { + x1=52.07mm; y1=26.67mm; x2=52.07mm; y2=1.01in; thickness=20.0mil; clearance=0.0; + } + ha:line.1198 { + x1=52.07mm; y1=1.01in; x2=1.65in; y2=1.01in; thickness=20.0mil; clearance=0.0; + } + ha:line.1201 { + x1=1.65in; y1=1.01in; x2=1.65in; y2=26.67mm; thickness=20.0mil; clearance=0.0; + } + ha:line.1204 { + x1=1.65in; y1=26.67mm; x2=1.665in; y2=26.67mm; thickness=20.0mil; clearance=0.0; + } + ha:line.1207 { + x1=1.665in; y1=26.67mm; x2=1.665in; y2=1.12in; thickness=20.0mil; clearance=0.0; + } + ha:line.1210 { + x1=1.665in; y1=1.12in; x2=1.65in; y2=1.12in; thickness=20.0mil; clearance=0.0; + } + ha:line.1213 { + x1=1.65in; y1=1.12in; x2=1.65in; y2=31.623mm; thickness=20.0mil; clearance=0.0; + } + ha:text.1216 { + string=%a.parent.refdes%; x=40.005mm; y=27.813mm; scale=100; fid=0; + ha:flags { + dyntext=1 + floater=1 + } + rot = 90.000000 + } + } + ha:type { + silk = 1 + top = 1 + } + } + + ha:subc-aux { + lid=1 + ha:combining { } + + li:objects { + ha:line.1217 { + x1=46.99mm; y1=1.6325in; x2=46.99mm; y2=1.6325in; thickness=0.1mm; clearance=0.0; + ha:attributes { + subc-role=pnp-origin + } + } + ha:line.1220 { + x1=46.99mm; y1=1.8in; x2=46.99mm; y2=1.8in; thickness=0.1mm; clearance=0.0; + ha:attributes { + subc-role=origin + } + } + ha:line.1223 { + x1=46.99mm; y1=1.8in; x2=46.99mm; y2=46.72mm; thickness=0.1mm; clearance=0.0; + ha:attributes { + subc-role=x + } + } + ha:line.1226 { + x1=46.99mm; y1=1.8in; x2=47.99mm; y2=1.8in; thickness=0.1mm; clearance=0.0; + ha:attributes { + subc-role=y + } + } + } + ha:type { + top = 1 + misc = 1 + virtual = 1 + } + } + } + } + uid = 2YrIDHgdUiD93dfM91oAAAAJ + } + ha:subc.1234 { + ha:attributes { + value=acy200 + footprint=rcy(200) + refdes=C3 + } + ha:data { + li:padstack_prototypes { + + ha:ps_proto_v6.0 { + hdia=0.999998mm; hplated=1; htop=0; hbottom=0; + li:shape { + + ha:ps_shape_v4 { + ha:combining { } + ha:layer_mask { + copper = 1 + top = 1 + } + clearance=0.0 + li:ps_poly { + -40.0mil + -40.0mil + 40.0mil + -40.0mil + 40.0mil + 40.0mil + -40.0mil + 40.0mil + } + } + + ha:ps_shape_v4 { + ha:combining { } + ha:layer_mask { + bottom = 1 + copper = 1 + } + clearance=0.0 + li:ps_poly { + -40.0mil + -40.0mil + 40.0mil + -40.0mil + 40.0mil + 40.0mil + -40.0mil + 40.0mil + } + } + + ha:ps_shape_v4 { + ha:combining { } + ha:layer_mask { + copper = 1 + intern = 1 + } + clearance=0.0 + li:ps_poly { + -40.0mil + -40.0mil + 40.0mil + -40.0mil + 40.0mil + 40.0mil + -40.0mil + 40.0mil + } + } + + ha:ps_shape_v4 { + ha:combining { sub=1; auto=1; } + ha:layer_mask { + top = 1 + mask = 1 + } + clearance=0.0 + li:ps_poly { + -43.0mil + -43.0mil + 43.0mil + -43.0mil + 43.0mil + 43.0mil + -43.0mil + 43.0mil + } + } + + ha:ps_shape_v4 { + ha:combining { sub=1; auto=1; } + ha:layer_mask { + bottom = 1 + mask = 1 + } + clearance=0.0 + li:ps_poly { + -43.0mil + -43.0mil + 43.0mil + -43.0mil + 43.0mil + 43.0mil + -43.0mil + 43.0mil + } + } + } + } + + ha:ps_proto_v6.1 { + hdia=0.999998mm; hplated=1; htop=0; hbottom=0; + li:shape { + + ha:ps_shape_v4 { + ha:ps_circ { x=0.0; y=0.0; dia=80.0mil; } + ha:combining { } + ha:layer_mask { + copper = 1 + top = 1 + } + clearance=0.0 + } + + ha:ps_shape_v4 { + ha:ps_circ { x=0.0; y=0.0; dia=80.0mil; } + ha:combining { } + ha:layer_mask { + bottom = 1 + copper = 1 + } + clearance=0.0 + } + + ha:ps_shape_v4 { + ha:ps_circ { x=0.0; y=0.0; dia=80.0mil; } + ha:combining { } + ha:layer_mask { + copper = 1 + intern = 1 + } + clearance=0.0 + } + + ha:ps_shape_v4 { + ha:ps_circ { x=0.0; y=0.0; dia=86.0mil; } + ha:combining { sub=1; auto=1; } + ha:layer_mask { + top = 1 + mask = 1 + } + clearance=0.0 + } + + ha:ps_shape_v4 { + ha:ps_circ { x=0.0; y=0.0; dia=86.0mil; } + ha:combining { sub=1; auto=1; } + ha:layer_mask { + bottom = 1 + mask = 1 + } + clearance=0.0 + } + } + } + } + + li:objects { + ha:padstack_ref.1258 { + proto=0; x=31.75mm; y=1.525in; rot=0.000000; xmirror=0; smirror=0; clearance=25.0mil; + ha:flags { + clearline=1 + } + + li:thermal { + } + + ha:attributes { + term=1 + } + } + ha:padstack_ref.1259 { + proto=1; x=36.83mm; y=1.525in; rot=0.000000; xmirror=0; smirror=0; clearance=25.0mil; + ha:flags { + clearline=1 + } + + li:thermal { + li:3 { + on + diag + round + noshape + } + } + + ha:attributes { + term=2 + } + } + } + li:layers { + + ha:top-silk { + lid=0 + ha:combining { } + + li:objects { + ha:line.1235 { + x1=1.57in; y1=1.525in; x2=1.61in; y2=1.525in; thickness=10.0mil; clearance=0.0; + } + ha:line.1238 { + x1=1.09in; y1=1.525in; x2=1.13in; y2=1.525in; thickness=10.0mil; clearance=0.0; + } + ha:line.1241 { + x1=1.11in; y1=1.505in; x2=1.11in; y2=39.243mm; thickness=10.0mil; clearance=0.0; + } + ha:arc.1244 { + x=1.35in; y=1.525in; width=200.0mil; height=200.0mil; astart=0; adelta=360; thickness=10.0mil; clearance=0.0; + } + ha:text.1245 { + string=%a.parent.refdes%; x=1.31in; y=31.242mm; scale=100; fid=0; + ha:flags { + dyntext=1 + floater=1 + } + rot = 0.000000 + } + } + ha:type { + silk = 1 + top = 1 + } + } + + ha:subc-aux { + lid=1 + ha:combining { } + + li:objects { + ha:line.1246 { + x1=1.35in; y1=1.525in; x2=1.35in; y2=1.525in; thickness=0.1mm; clearance=0.0; + ha:attributes { + subc-role=pnp-origin + } + } + ha:line.1249 { + x1=31.75mm; y1=1.525in; x2=31.75mm; y2=1.525in; thickness=0.1mm; clearance=0.0; + ha:attributes { + subc-role=origin + } + } + ha:line.1252 { + x1=31.75mm; y1=1.525in; x2=32.75mm; y2=1.525in; thickness=0.1mm; clearance=0.0; + ha:attributes { + subc-role=x + } + } + ha:line.1255 { + x1=31.75mm; y1=1.525in; x2=31.75mm; y2=39.735mm; thickness=0.1mm; clearance=0.0; + ha:attributes { + subc-role=y + } + } + } + ha:type { + top = 1 + misc = 1 + virtual = 1 + } + } + } + } + uid = 2YrIDHgdUiD93dfM91oAAAAL + } + ha:subc.1261 { + ha:attributes { + value=1*2 + footprint=connector(1,2) + refdes=J1 + } + ha:data { + li:padstack_prototypes { + + ha:ps_proto_v6.0 { + hdia=0.999998mm; hplated=1; htop=0; hbottom=0; + li:shape { + + ha:ps_shape_v4 { + ha:combining { } + ha:layer_mask { + copper = 1 + top = 1 + } + clearance=0.0 + li:ps_poly { + -40.0mil + -40.0mil + 40.0mil + -40.0mil + 40.0mil + 40.0mil + -40.0mil + 40.0mil + } + } + + ha:ps_shape_v4 { + ha:combining { } + ha:layer_mask { + bottom = 1 + copper = 1 + } + clearance=0.0 + li:ps_poly { + -40.0mil + -40.0mil + 40.0mil + -40.0mil + 40.0mil + 40.0mil + -40.0mil + 40.0mil + } + } + + ha:ps_shape_v4 { + ha:combining { } + ha:layer_mask { + copper = 1 + intern = 1 + } + clearance=0.0 + li:ps_poly { + -40.0mil + -40.0mil + 40.0mil + -40.0mil + 40.0mil + 40.0mil + -40.0mil + 40.0mil + } + } + + ha:ps_shape_v4 { + ha:combining { sub=1; auto=1; } + ha:layer_mask { + top = 1 + mask = 1 + } + clearance=0.0 + li:ps_poly { + -43.0mil + -43.0mil + 43.0mil + -43.0mil + 43.0mil + 43.0mil + -43.0mil + 43.0mil + } + } + + ha:ps_shape_v4 { + ha:combining { sub=1; auto=1; } + ha:layer_mask { + bottom = 1 + mask = 1 + } + clearance=0.0 + li:ps_poly { + -43.0mil + -43.0mil + 43.0mil + -43.0mil + 43.0mil + 43.0mil + -43.0mil + 43.0mil + } + } + } + } + + ha:ps_proto_v6.1 { + hdia=0.999998mm; hplated=1; htop=0; hbottom=0; + li:shape { + + ha:ps_shape_v4 { + ha:ps_circ { x=0.0; y=0.0; dia=80.0mil; } + ha:combining { } + ha:layer_mask { + copper = 1 + top = 1 + } + clearance=0.0 + } + + ha:ps_shape_v4 { + ha:ps_circ { x=0.0; y=0.0; dia=80.0mil; } + ha:combining { } + ha:layer_mask { + bottom = 1 + copper = 1 + } + clearance=0.0 + } + + ha:ps_shape_v4 { + ha:ps_circ { x=0.0; y=0.0; dia=80.0mil; } + ha:combining { } + ha:layer_mask { + copper = 1 + intern = 1 + } + clearance=0.0 + } + + ha:ps_shape_v4 { + ha:ps_circ { x=0.0; y=0.0; dia=86.0mil; } + ha:combining { sub=1; auto=1; } + ha:layer_mask { + top = 1 + mask = 1 + } + clearance=0.0 + } + + ha:ps_shape_v4 { + ha:ps_circ { x=0.0; y=0.0; dia=86.0mil; } + ha:combining { sub=1; auto=1; } + ha:layer_mask { + bottom = 1 + mask = 1 + } + clearance=0.0 + } + } + } + } + + li:objects { + ha:padstack_ref.1293 { + proto=0; x=975.0mil; y=46.355mm; rot=0.000000; xmirror=0; smirror=0; clearance=25.0mil; + ha:flags { + clearline=1 + } + + li:thermal { + } + + ha:attributes { + term=1 + } + } + ha:padstack_ref.1294 { + proto=1; x=975.0mil; y=48.895mm; rot=0.000000; xmirror=0; smirror=0; clearance=25.0mil; + ha:flags { + clearline=1 + } + + li:thermal { + li:3 { + on + round + noshape + } + } + + ha:attributes { + term=2 + } + } + } + li:layers { + + ha:top-silk { + lid=0 + ha:combining { } + + li:objects { + ha:line.1262 { + x1=925.0mil; y1=45.085mm; x2=925.0mil; y2=1.975in; thickness=10.0mil; clearance=0.0; + } + ha:line.1265 { + x1=925.0mil; y1=45.085mm; x2=26.035mm; y2=45.085mm; thickness=10.0mil; clearance=0.0; + } + ha:line.1268 { + x1=26.035mm; y1=1.975in; x2=925.0mil; y2=1.975in; thickness=10.0mil; clearance=0.0; + } + ha:line.1271 { + x1=26.035mm; y1=1.975in; x2=26.035mm; y2=45.085mm; thickness=10.0mil; clearance=0.0; + } + ha:line.1274 { + x1=925.0mil; y1=47.625mm; x2=26.035mm; y2=47.625mm; thickness=10.0mil; clearance=0.0; + } + ha:line.1277 { + x1=26.035mm; y1=45.085mm; x2=26.035mm; y2=47.625mm; thickness=10.0mil; clearance=0.0; + } + ha:text.1280 { + string=%a.parent.refdes%; x=950.0mil; y=42.545mm; scale=100; fid=0; + ha:flags { + dyntext=1 + floater=1 + } + rot = 0.000000 + } + } + ha:type { + silk = 1 + top = 1 + } + } + + ha:subc-aux { + lid=1 + ha:combining { } + + li:objects { + ha:line.1281 { + x1=975.0mil; y1=47.625mm; x2=975.0mil; y2=47.625mm; thickness=0.1mm; clearance=0.0; + ha:attributes { + subc-role=pnp-origin + } + } + ha:line.1284 { + x1=975.0mil; y1=46.355mm; x2=975.0mil; y2=46.355mm; thickness=0.1mm; clearance=0.0; + ha:attributes { + subc-role=origin + } + } + ha:line.1287 { + x1=975.0mil; y1=46.355mm; x2=975.0mil; y2=45.355mm; thickness=0.1mm; clearance=0.0; + ha:attributes { + subc-role=x + } + } + ha:line.1290 { + x1=975.0mil; y1=46.355mm; x2=23.765mm; y2=46.355mm; thickness=0.1mm; clearance=0.0; + ha:attributes { + subc-role=y + } + } + } + ha:type { + top = 1 + misc = 1 + virtual = 1 + } + } + } + } + uid = 2YrIDHgdUiD93dfM91oAAAAN + } + ha:subc.1296 { + ha:attributes { + value=1*2 + footprint=connector(1,2) + refdes=J2 + } + ha:data { + li:padstack_prototypes { + + ha:ps_proto_v6.0 { + hdia=0.999998mm; hplated=1; htop=0; hbottom=0; + li:shape { + + ha:ps_shape_v4 { + ha:combining { } + ha:layer_mask { + copper = 1 + top = 1 + } + clearance=0.0 + li:ps_poly { + -40.0mil + -40.0mil + 40.0mil + -40.0mil + 40.0mil + 40.0mil + -40.0mil + 40.0mil + } + } + + ha:ps_shape_v4 { + ha:combining { } + ha:layer_mask { + bottom = 1 + copper = 1 + } + clearance=0.0 + li:ps_poly { + -40.0mil + -40.0mil + 40.0mil + -40.0mil + 40.0mil + 40.0mil + -40.0mil + 40.0mil + } + } + + ha:ps_shape_v4 { + ha:combining { } + ha:layer_mask { + copper = 1 + intern = 1 + } + clearance=0.0 + li:ps_poly { + -40.0mil + -40.0mil + 40.0mil + -40.0mil + 40.0mil + 40.0mil + -40.0mil + 40.0mil + } + } + + ha:ps_shape_v4 { + ha:combining { sub=1; auto=1; } + ha:layer_mask { + top = 1 + mask = 1 + } + clearance=0.0 + li:ps_poly { + -43.0mil + -43.0mil + 43.0mil + -43.0mil + 43.0mil + 43.0mil + -43.0mil + 43.0mil + } + } + + ha:ps_shape_v4 { + ha:combining { sub=1; auto=1; } + ha:layer_mask { + bottom = 1 + mask = 1 + } + clearance=0.0 + li:ps_poly { + -43.0mil + -43.0mil + 43.0mil + -43.0mil + 43.0mil + 43.0mil + -43.0mil + 43.0mil + } + } + } + } + + ha:ps_proto_v6.1 { + hdia=0.999998mm; hplated=1; htop=0; hbottom=0; + li:shape { + + ha:ps_shape_v4 { + ha:ps_circ { x=0.0; y=0.0; dia=80.0mil; } + ha:combining { } + ha:layer_mask { + copper = 1 + top = 1 + } + clearance=0.0 + } + + ha:ps_shape_v4 { + ha:ps_circ { x=0.0; y=0.0; dia=80.0mil; } + ha:combining { } + ha:layer_mask { + bottom = 1 + copper = 1 + } + clearance=0.0 + } + + ha:ps_shape_v4 { + ha:ps_circ { x=0.0; y=0.0; dia=80.0mil; } + ha:combining { } + ha:layer_mask { + copper = 1 + intern = 1 + } + clearance=0.0 + } + + ha:ps_shape_v4 { + ha:ps_circ { x=0.0; y=0.0; dia=86.0mil; } + ha:combining { sub=1; auto=1; } + ha:layer_mask { + top = 1 + mask = 1 + } + clearance=0.0 + } + + ha:ps_shape_v4 { + ha:ps_circ { x=0.0; y=0.0; dia=86.0mil; } + ha:combining { sub=1; auto=1; } + ha:layer_mask { + bottom = 1 + mask = 1 + } + clearance=0.0 + } + } + } + } + + li:objects { + ha:padstack_ref.1328 { + proto=0; x=60.96mm; y=46.99mm; rot=0.000000; xmirror=0; smirror=0; clearance=25.0mil; + ha:flags { + clearline=1 + } + + li:thermal { + } + + ha:attributes { + term=1 + } + } + ha:padstack_ref.1329 { + proto=1; x=60.96mm; y=49.53mm; rot=0.000000; xmirror=0; smirror=0; clearance=25.0mil; + ha:flags { + clearline=1 + } + + li:thermal { + li:3 { + on + diag + round + noshape + } + } + + ha:attributes { + term=2 + } + } + } + li:layers { + + ha:top-silk { + lid=0 + ha:combining { } + + li:objects { + ha:line.1297 { + x1=2.35in; y1=1.8in; x2=2.35in; y2=2.0in; thickness=10.0mil; clearance=0.0; + } + ha:line.1300 { + x1=2.35in; y1=1.8in; x2=2.45in; y2=1.8in; thickness=10.0mil; clearance=0.0; + } + ha:line.1303 { + x1=2.45in; y1=2.0in; x2=2.35in; y2=2.0in; thickness=10.0mil; clearance=0.0; + } + ha:line.1306 { + x1=2.45in; y1=2.0in; x2=2.45in; y2=1.8in; thickness=10.0mil; clearance=0.0; + } + ha:line.1309 { + x1=2.35in; y1=1.9in; x2=2.45in; y2=1.9in; thickness=10.0mil; clearance=0.0; + } + ha:line.1312 { + x1=2.45in; y1=1.8in; x2=2.45in; y2=1.9in; thickness=10.0mil; clearance=0.0; + } + ha:text.1315 { + string=%a.parent.refdes%; x=60.325mm; y=43.18mm; scale=100; fid=0; + ha:flags { + dyntext=1 + floater=1 + } + rot = 0.000000 + } + } + ha:type { + silk = 1 + top = 1 + } + } + + ha:subc-aux { + lid=1 + ha:combining { } + + li:objects { + ha:line.1316 { + x1=60.96mm; y1=1.9in; x2=60.96mm; y2=1.9in; thickness=0.1mm; clearance=0.0; + ha:attributes { + subc-role=pnp-origin + } + } + ha:line.1319 { + x1=60.96mm; y1=46.99mm; x2=60.96mm; y2=46.99mm; thickness=0.1mm; clearance=0.0; + ha:attributes { + subc-role=origin + } + } + ha:line.1322 { + x1=60.96mm; y1=46.99mm; x2=60.96mm; y2=45.99mm; thickness=0.1mm; clearance=0.0; + ha:attributes { + subc-role=x + } + } + ha:line.1325 { + x1=60.96mm; y1=46.99mm; x2=59.96mm; y2=46.99mm; thickness=0.1mm; clearance=0.0; + ha:attributes { + subc-role=y + } + } + } + ha:type { + top = 1 + misc = 1 + virtual = 1 + } + } + } + } + uid = 2YrIDHgdUiD93dfM91oAAAAN + } + ha:subc.1331 { + ha:attributes { + value=acy200 + footprint=acy(200) + refdes=C1 + } + ha:data { + li:padstack_prototypes { + + ha:ps_proto_v6.0 { + hdia=0.999998mm; hplated=1; htop=0; hbottom=0; + li:shape { + + ha:ps_shape_v4 { + ha:combining { } + ha:layer_mask { + copper = 1 + top = 1 + } + clearance=0.0 + li:ps_poly { + -40.0mil + -40.0mil + 40.0mil + -40.0mil + 40.0mil + 40.0mil + -40.0mil + 40.0mil + } + } + + ha:ps_shape_v4 { + ha:combining { } + ha:layer_mask { + bottom = 1 + copper = 1 + } + clearance=0.0 + li:ps_poly { + -40.0mil + -40.0mil + 40.0mil + -40.0mil + 40.0mil + 40.0mil + -40.0mil + 40.0mil + } + } + + ha:ps_shape_v4 { + ha:combining { } + ha:layer_mask { + copper = 1 + intern = 1 + } + clearance=0.0 + li:ps_poly { + -40.0mil + -40.0mil + 40.0mil + -40.0mil + 40.0mil + 40.0mil + -40.0mil + 40.0mil + } + } + + ha:ps_shape_v4 { + ha:combining { sub=1; auto=1; } + ha:layer_mask { + top = 1 + mask = 1 + } + clearance=0.0 + li:ps_poly { + -43.0mil + -43.0mil + 43.0mil + -43.0mil + 43.0mil + 43.0mil + -43.0mil + 43.0mil + } + } + + ha:ps_shape_v4 { + ha:combining { sub=1; auto=1; } + ha:layer_mask { + bottom = 1 + mask = 1 + } + clearance=0.0 + li:ps_poly { + -43.0mil + -43.0mil + 43.0mil + -43.0mil + 43.0mil + 43.0mil + -43.0mil + 43.0mil + } + } + } + } + + ha:ps_proto_v6.1 { + hdia=0.999998mm; hplated=1; htop=0; hbottom=0; + li:shape { + + ha:ps_shape_v4 { + ha:ps_circ { x=0.0; y=0.0; dia=80.0mil; } + ha:combining { } + ha:layer_mask { + copper = 1 + top = 1 + } + clearance=0.0 + } + + ha:ps_shape_v4 { + ha:ps_circ { x=0.0; y=0.0; dia=80.0mil; } + ha:combining { } + ha:layer_mask { + bottom = 1 + copper = 1 + } + clearance=0.0 + } + + ha:ps_shape_v4 { + ha:ps_circ { x=0.0; y=0.0; dia=80.0mil; } + ha:combining { } + ha:layer_mask { + copper = 1 + intern = 1 + } + clearance=0.0 + } + + ha:ps_shape_v4 { + ha:ps_circ { x=0.0; y=0.0; dia=86.0mil; } + ha:combining { sub=1; auto=1; } + ha:layer_mask { + top = 1 + mask = 1 + } + clearance=0.0 + } + + ha:ps_shape_v4 { + ha:ps_circ { x=0.0; y=0.0; dia=86.0mil; } + ha:combining { sub=1; auto=1; } + ha:layer_mask { + bottom = 1 + mask = 1 + } + clearance=0.0 + } + } + } + } + + li:objects { + ha:padstack_ref.1363 { + proto=0; x=38.1mm; y=53.975mm; rot=0.000000; xmirror=0; smirror=0; clearance=25.0mil; + ha:flags { + clearline=1 + } + + li:thermal { + } + + ha:attributes { + term=1 + } + } + ha:padstack_ref.1364 { + proto=1; x=43.18mm; y=53.975mm; rot=0.000000; xmirror=0; smirror=0; clearance=25.0mil; + ha:flags { + clearline=1 + } + + li:thermal { + li:3 { + on + diag + round + noshape + } + } + + ha:attributes { + term=2 + } + } + } + li:layers { + + ha:top-silk { + lid=0 + ha:combining { } + + li:objects { + ha:line.1332 { + x1=38.1mm; y1=53.975mm; x2=1.55in; y2=53.975mm; thickness=10.0mil; clearance=0.0; + } + ha:line.1335 { + x1=1.65in; y1=53.975mm; x2=43.18mm; y2=53.975mm; thickness=10.0mil; clearance=0.0; + } + ha:line.1338 { + x1=1.55in; y1=2.10834in; x2=1.55in; y2=54.398164mm; thickness=10.0mil; clearance=0.0; + } + ha:line.1341 { + x1=1.55in; y1=2.10834in; x2=1.65in; y2=2.10834in; thickness=10.0mil; clearance=0.0; + } + ha:line.1344 { + x1=1.65in; y1=54.398164mm; x2=1.55in; y2=54.398164mm; thickness=10.0mil; clearance=0.0; + } + ha:line.1347 { + x1=1.65in; y1=54.398164mm; x2=1.65in; y2=2.10834in; thickness=10.0mil; clearance=0.0; + } + ha:text.1350 { + string=%a.parent.refdes%; x=1.56in; y=50.927mm; scale=100; fid=0; + ha:flags { + dyntext=1 + floater=1 + } + rot = 0.000000 + } + } + ha:type { + silk = 1 + top = 1 + } + } + + ha:subc-aux { + lid=1 + ha:combining { } + + li:objects { + ha:line.1351 { + x1=1.6in; y1=53.975mm; x2=1.6in; y2=53.975mm; thickness=0.1mm; clearance=0.0; + ha:attributes { + subc-role=pnp-origin + } + } + ha:line.1354 { + x1=38.1mm; y1=53.975mm; x2=38.1mm; y2=53.975mm; thickness=0.1mm; clearance=0.0; + ha:attributes { + subc-role=origin + } + } + ha:line.1357 { + x1=38.1mm; y1=53.975mm; x2=39.1mm; y2=53.975mm; thickness=0.1mm; clearance=0.0; + ha:attributes { + subc-role=x + } + } + ha:line.1360 { + x1=38.1mm; y1=53.975mm; x2=38.1mm; y2=54.975mm; thickness=0.1mm; clearance=0.0; + ha:attributes { + subc-role=y + } + } + } + ha:type { + top = 1 + misc = 1 + virtual = 1 + } + } + } + } + uid = 2YrIDHgdUiD93dfM91oAAAAB + } + ha:subc.1366 { + ha:attributes { + value=acy200 + footprint=acy(200) + refdes=C2 + } + ha:data { + li:padstack_prototypes { + + ha:ps_proto_v6.0 { + hdia=0.999998mm; hplated=1; htop=0; hbottom=0; + li:shape { + + ha:ps_shape_v4 { + ha:combining { } + ha:layer_mask { + copper = 1 + top = 1 + } + clearance=0.0 + li:ps_poly { + -40.0mil + -40.0mil + 40.0mil + -40.0mil + 40.0mil + 40.0mil + -40.0mil + 40.0mil + } + } + + ha:ps_shape_v4 { + ha:combining { } + ha:layer_mask { + bottom = 1 + copper = 1 + } + clearance=0.0 + li:ps_poly { + -40.0mil + -40.0mil + 40.0mil + -40.0mil + 40.0mil + 40.0mil + -40.0mil + 40.0mil + } + } + + ha:ps_shape_v4 { + ha:combining { } + ha:layer_mask { + copper = 1 + intern = 1 + } + clearance=0.0 + li:ps_poly { + -40.0mil + -40.0mil + 40.0mil + -40.0mil + 40.0mil + 40.0mil + -40.0mil + 40.0mil + } + } + + ha:ps_shape_v4 { + ha:combining { sub=1; auto=1; } + ha:layer_mask { + top = 1 + mask = 1 + } + clearance=0.0 + li:ps_poly { + -43.0mil + -43.0mil + 43.0mil + -43.0mil + 43.0mil + 43.0mil + -43.0mil + 43.0mil + } + } + + ha:ps_shape_v4 { + ha:combining { sub=1; auto=1; } + ha:layer_mask { + bottom = 1 + mask = 1 + } + clearance=0.0 + li:ps_poly { + -43.0mil + -43.0mil + 43.0mil + -43.0mil + 43.0mil + 43.0mil + -43.0mil + 43.0mil + } + } + } + } + + ha:ps_proto_v6.1 { + hdia=0.999998mm; hplated=1; htop=0; hbottom=0; + li:shape { + + ha:ps_shape_v4 { + ha:ps_circ { x=0.0; y=0.0; dia=80.0mil; } + ha:combining { } + ha:layer_mask { + copper = 1 + top = 1 + } + clearance=0.0 + } + + ha:ps_shape_v4 { + ha:ps_circ { x=0.0; y=0.0; dia=80.0mil; } + ha:combining { } + ha:layer_mask { + bottom = 1 + copper = 1 + } + clearance=0.0 + } + + ha:ps_shape_v4 { + ha:ps_circ { x=0.0; y=0.0; dia=80.0mil; } + ha:combining { } + ha:layer_mask { + copper = 1 + intern = 1 + } + clearance=0.0 + } + + ha:ps_shape_v4 { + ha:ps_circ { x=0.0; y=0.0; dia=86.0mil; } + ha:combining { sub=1; auto=1; } + ha:layer_mask { + top = 1 + mask = 1 + } + clearance=0.0 + } + + ha:ps_shape_v4 { + ha:ps_circ { x=0.0; y=0.0; dia=86.0mil; } + ha:combining { sub=1; auto=1; } + ha:layer_mask { + bottom = 1 + mask = 1 + } + clearance=0.0 + } + } + } + } + + li:objects { + ha:padstack_ref.1398 { + proto=0; x=48.895mm; y=53.975mm; rot=0.000000; xmirror=0; smirror=0; clearance=25.0mil; + ha:flags { + clearline=1 + } + + li:thermal { + } + + ha:attributes { + term=1 + } + } + ha:padstack_ref.1399 { + proto=1; x=53.975mm; y=53.975mm; rot=0.000000; xmirror=0; smirror=0; clearance=25.0mil; + ha:flags { + clearline=1 + } + + li:thermal { + li:3 { + on + diag + round + noshape + } + } + + ha:attributes { + term=2 + } + } + } + li:layers { + + ha:top-silk { + lid=0 + ha:combining { } + + li:objects { + ha:line.1367 { + x1=48.895mm; y1=53.975mm; x2=1.975in; y2=53.975mm; thickness=10.0mil; clearance=0.0; + } + ha:line.1370 { + x1=2.075in; y1=53.975mm; x2=53.975mm; y2=53.975mm; thickness=10.0mil; clearance=0.0; + } + ha:line.1373 { + x1=1.975in; y1=2.10834in; x2=1.975in; y2=54.398164mm; thickness=10.0mil; clearance=0.0; + } + ha:line.1376 { + x1=1.975in; y1=2.10834in; x2=2.075in; y2=2.10834in; thickness=10.0mil; clearance=0.0; + } + ha:line.1379 { + x1=2.075in; y1=54.398164mm; x2=1.975in; y2=54.398164mm; thickness=10.0mil; clearance=0.0; + } + ha:line.1382 { + x1=2.075in; y1=54.398164mm; x2=2.075in; y2=2.10834in; thickness=10.0mil; clearance=0.0; + } + ha:text.1385 { + string=%a.parent.refdes%; x=1.985in; y=50.927mm; scale=100; fid=0; + ha:flags { + dyntext=1 + floater=1 + } + rot = 0.000000 + } + } + ha:type { + silk = 1 + top = 1 + } + } + + ha:subc-aux { + lid=1 + ha:combining { } + + li:objects { + ha:line.1386 { + x1=51.435mm; y1=53.975mm; x2=51.435mm; y2=53.975mm; thickness=0.1mm; clearance=0.0; + ha:flags { + selected=1 + } + + ha:attributes { + subc-role=pnp-origin + } + } + ha:line.1389 { + x1=48.895mm; y1=53.975mm; x2=48.895mm; y2=53.975mm; thickness=0.1mm; clearance=0.0; + ha:flags { + selected=1 + } + + ha:attributes { + subc-role=origin + } + } + ha:line.1392 { + x1=48.895mm; y1=53.975mm; x2=49.895mm; y2=53.975mm; thickness=0.1mm; clearance=0.0; + ha:flags { + selected=1 + } + + ha:attributes { + subc-role=x + } + } + ha:line.1395 { + x1=48.895mm; y1=53.975mm; x2=48.895mm; y2=54.975mm; thickness=0.1mm; clearance=0.0; + ha:flags { + selected=1 + } + + ha:attributes { + subc-role=y + } + } + } + ha:type { + top = 1 + misc = 1 + virtual = 1 + } + } + } + } + uid = 2YrIDHgdUiD93dfM91oAAAAB + } + } + li:layers { + + ha:top-sig { + lid=0 + group=3 + ha:combining { } + + li:objects { + } + color = {#8b2323} + } + + ha:bottom-sig { + lid=1 + group=10 + ha:combining { } + + li:objects { + ha:line.1433 { + x1=1.175in; y1=46.355mm; x2=31.75mm; y2=44.45mm; thickness=20.0mil; clearance=40.0mil; + ha:flags { + clearline=1 + } + } + ha:line.1436 { + x1=31.75mm; y1=44.45mm; x2=31.75mm; y2=1.525in; thickness=20.0mil; clearance=40.0mil; + ha:flags { + clearline=1 + } + } + ha:line.1472 { + x1=1.375in; y1=46.355mm; x2=38.1mm; y2=49.53mm; thickness=20.0mil; clearance=40.0mil; + ha:flags { + clearline=1 + } + } + ha:line.1475 { + x1=38.1mm; y1=49.53mm; x2=38.1mm; y2=53.975mm; thickness=20.0mil; clearance=40.0mil; + ha:flags { + clearline=1 + } + } + ha:line.1478 { + x1=975.0mil; y1=46.355mm; x2=1.725in; y2=46.355mm; thickness=20.0mil; clearance=40.0mil; + ha:flags { + clearline=1 + } + } + ha:line.1481 { + x1=1.725in; y1=46.355mm; x2=44.45mm; y2=1.8in; thickness=20.0mil; clearance=40.0mil; + ha:flags { + clearline=1 + } + } + ha:line.1505 { + x1=49.53mm; y1=1.8in; x2=2.35in; y2=1.8in; thickness=20.0mil; clearance=40.0mil; + ha:flags { + clearline=1 + } + } + ha:line.1508 { + x1=2.35in; y1=1.8in; x2=60.96mm; y2=46.99mm; thickness=20.0mil; clearance=40.0mil; + ha:flags { + clearline=1 + } + } + ha:line.1511 { + x1=49.53mm; y1=1.8in; x2=48.895mm; y2=46.355mm; thickness=20.0mil; clearance=40.0mil; + ha:flags { + clearline=1 + } + } + ha:line.1514 { + x1=48.895mm; y1=46.355mm; x2=48.895mm; y2=53.975mm; thickness=20.0mil; clearance=40.0mil; + ha:flags { + clearline=1 + } + } + } + color = {#3a5fcd} + } + + ha:top-gnd { + lid=2 + group=3 + ha:combining { } + + li:objects { + } + color = {#104e8b} + } + + ha:bottom-gnd { + lid=3 + group=10 + ha:combining { } + + li:objects { + ha:polygon.1537 { clearance=40.0mil; + li:geometry { + ta:contour { + { 850.0mil; 975.0mil } + { 64.135mm; 975.0mil } + { 64.135mm; 2.25in } + { 850.0mil; 2.25in } + } + } + + ha:flags { + clearpoly=1 + } + } + } + color = {#cd3700} + } + + ha:int-sig2 { + lid=4 + group=7 + ha:combining { } + + li:objects { + } + color = {#548b54} + } + + ha:int-sig1 { + lid=5 + group=5 + ha:combining { } + + li:objects { + } + color = {#8b7355} + } + + ha:outline { + lid=6 + group=9 + ha:combining { } + + li:objects { + } + color = {#00868b} + } + + ha:bottom-silk { + lid=7 + group=12 + ha:combining { auto=1; } + + li:objects { + } + color = {#000000} + } + + ha:top-silk { + lid=8 + group=1 + ha:combining { auto=1; } + + li:objects { + } + color = {#000000} + } + + ha:top-paste { + lid=9 + group=0 + ha:combining { auto=1; } + + li:objects { + } + color = {#cd00cd} + } + + ha:top-mask { + lid=10 + group=2 + ha:combining { sub=1; auto=1; } + + li:objects { + } + color = {#ff0000} + } + + ha:bottom-mask { + lid=11 + group=11 + ha:combining { sub=1; auto=1; } + + li:objects { + } + color = {#ff0000} + } + + ha:bottom-paste { + lid=12 + group=13 + ha:combining { auto=1; } + + li:objects { + } + color = {#cd00cd} + } + + ha:slot-plated { + lid=13 + group=14 + ha:combining { auto=1; } + + li:objects { + } + color = {#8b7355} + } + + ha:slot-unplated { + lid=14 + group=15 + ha:combining { auto=1; } + + li:objects { + } + color = {#00868b} + } + } + } + + ha:netlists { + li:netlist_patch { + ha:add_conn { net=gnd; term=J1-2; } + ha:add_conn { net=gnd; term=C1-2; } + ha:add_conn { net=gnd; term=C2-2; } + ha:add_conn { net=gnd; term=J2-2; } + ha:add_conn { net=gnd; term=U1-2; } + ha:add_conn { net=gnd; term=C3-2; } + ha:add_conn { net=in; term=J1-1; } + ha:add_conn { net=in; term=C3-1; } + ha:add_conn { net=in; term=U1-1; } + ha:add_conn { net=in; term=C1-1; } + ha:add_conn { net=out; term=J2-1; } + ha:add_conn { net=out; term=U1-3; } + ha:add_conn { net=out; term=C2-1; } + } + } + ha:layer_stack { + li:groups { + ha:0 { + name = top_paste + ha:type { top=1; paste=1; } + li:layers { 9; } + } + ha:1 { + name = top_silk + ha:type { silk=1; top=1; } + li:layers { 8; } + } + ha:2 { + name = top_mask + ha:type { top=1; mask=1; } + li:layers { 10; } + } + ha:3 { + name = top_copper + ha:type { copper=1; top=1; } + li:layers { 0; 2; } + } + ha:4 { + name = grp_4 + ha:type { substrate=1; intern=1; } + li:layers { } + } + ha:5 { + name = Intern + ha:type { copper=1; intern=1; } + li:layers { 5; } + } + ha:6 { + name = grp_6 + ha:type { substrate=1; intern=1; } + li:layers { } + } + ha:7 { + name = Intern + ha:type { copper=1; intern=1; } + li:layers { 4; } + } + ha:8 { + name = grp_8 + ha:type { substrate=1; intern=1; } + li:layers { } + } + ha:9 { + name = global_outline + ha:type { boundary=1; } + li:layers { 6; } + purpose = uroute + } + ha:10 { + name = bottom_copper + ha:type { bottom=1; copper=1; } + li:layers { 1; 3; } + } + ha:11 { + name = bottom_mask + ha:type { bottom=1; mask=1; } + li:layers { 11; } + } + ha:12 { + name = bottom_silk + ha:type { silk=1; bottom=1; } + li:layers { 7; } + } + ha:13 { + name = bottom_paste + ha:type { bottom=1; paste=1; } + li:layers { 12; } + } + ha:14 { + name = pmech + ha:type { mech=1; } + li:layers { 13; } + purpose = proute + } + ha:15 { + name = umech + ha:type { mech=1; } + li:layers { 14; } + purpose = uroute + } + } + } + li:pcb-rnd-conf-v1 { + ha:overwrite { + ha:design { + text_font_id = 0 + text_scale = 100 + via_thickness = 2.2000 mm + via_drilling_hole = 1000.00 um + text_thickness = 0 + line_thickness = 20.00 mil + poly_isle_area = 200000000.0 + clearance = 20.00 mil + } + ha:editor { + line_refraction = 1 + buffer_number = 0 + draw_grid = false + grids_idx = 4 + grid = 25.00 mil + } + } + } +} Index: trunk/doc/tutorials/15_no_sch/step6.png =================================================================== Cannot display: file marked as a binary type. svn:mime-type = application/octet-stream Index: trunk/doc/tutorials/15_no_sch/step6.png =================================================================== --- trunk/doc/tutorials/15_no_sch/step6.png (nonexistent) +++ trunk/doc/tutorials/15_no_sch/step6.png (revision 24781) Property changes on: trunk/doc/tutorials/15_no_sch/step6.png ___________________________________________________________________ Added: svn:mime-type ## -0,0 +1 ## +application/octet-stream \ No newline at end of property