Index: ref/arc_angles.gcode/arc_angles.gcode.top.cnc
===================================================================
--- ref/arc_angles.gcode/arc_angles.gcode.top.cnc	(nonexistent)
+++ ref/arc_angles.gcode/arc_angles.gcode.top.cnc	(revision 27031)
@@ -0,0 +1,73 @@
+(Created by G-code exporter)
+(600 dpi)
+(Unit: inch)
+(Board size: 0.50x0.50 inches)#100=0.002000  (safe Z)
+#101=-0.000050  (cutting depth)
+(---------------------------------)
+G17 G20 G90 G64 P0.003 M3 S3000 M7 F1
+G0 Z#100
+(polygon 1)
+G0 X0.298333 Y0.455000    (start point)
+G1 Z#101
+G1 X0.283333 Y0.451667
+G1 X0.270000 Y0.445000
+G1 X0.255000 Y0.430000
+G1 X0.246667 Y0.411667
+G1 X0.246667 Y0.386667
+G1 X0.255000 Y0.368333
+G1 X0.270000 Y0.353333
+G1 X0.288333 Y0.345000
+G1 X0.313333 Y0.345000
+G1 X0.331667 Y0.353333
+G1 X0.346667 Y0.368333
+G1 X0.355000 Y0.385000
+G1 X0.355000 Y0.395000
+G1 X0.358333 Y0.396667
+G1 X0.358333 Y0.406667
+G1 X0.365000 Y0.425000
+G1 X0.361667 Y0.430000
+G1 X0.356667 Y0.430000
+G1 X0.351667 Y0.421667
+G1 X0.341667 Y0.436667
+G1 X0.328333 Y0.446667
+G1 X0.313333 Y0.453333
+G1 X0.298333 Y0.455000
+G0 Z#100
+(polygon end, distance 0.37)
+(polygon 2)
+G0 X0.291667 Y0.441667    (start point)
+G1 Z#101
+G1 X0.278333 Y0.436667
+G1 X0.263333 Y0.421667
+G1 X0.258333 Y0.406667
+G1 X0.258333 Y0.391667
+G1 X0.263333 Y0.376667
+G1 X0.278333 Y0.361667
+G1 X0.293333 Y0.356667
+G1 X0.308333 Y0.356667
+G1 X0.323333 Y0.361667
+G1 X0.338333 Y0.376667
+G1 X0.343333 Y0.391667
+G1 X0.343333 Y0.406667
+G1 X0.338333 Y0.421667
+G1 X0.323333 Y0.436667
+G1 X0.308333 Y0.441667
+G1 X0.291667 Y0.441667
+G0 Z#100
+(polygon end, distance 0.27)
+(polygon 3)
+G0 X0.048333 Y0.405000    (start point)
+G1 Z#101
+G1 X0.045000 Y0.400000
+G1 X0.048333 Y0.381667
+G1 X0.055000 Y0.371667
+G1 X0.060000 Y0.368333
+G1 X0.065000 Y0.373333
+G1 X0.058333 Y0.391667
+G1 X0.058333 Y0.401667
+G1 X0.055000 Y0.405000
+G1 X0.048333 Y0.405000
+G0 Z#100
+(polygon end, distance 0.09)
+(end, total distance 18.68mm = 0.74in)
+M5 M9 M2
Index: ref/arc_f_clear.gcode/arc_f_clear.gcode.top.cnc
===================================================================
--- ref/arc_f_clear.gcode/arc_f_clear.gcode.top.cnc	(nonexistent)
+++ ref/arc_f_clear.gcode/arc_f_clear.gcode.top.cnc	(revision 27031)
@@ -0,0 +1,162 @@
+(Created by G-code exporter)
+(600 dpi)
+(Unit: inch)
+(Board size: 0.50x0.50 inches)#100=0.002000  (safe Z)
+#101=-0.000050  (cutting depth)
+(---------------------------------)
+G17 G20 G90 G64 P0.003 M3 S3000 M7 F1
+G0 Z#100
+(polygon 1)
+G0 X0.246667 Y0.415000    (start point)
+G1 Z#101
+G1 X0.220000 Y0.411667
+G1 X0.201667 Y0.405000
+G1 X0.193333 Y0.395000
+G1 X0.193333 Y0.386667
+G1 X0.205000 Y0.375000
+G1 X0.213333 Y0.375000
+G1 X0.226667 Y0.380000
+G1 X0.260000 Y0.381667
+G1 X0.280000 Y0.378333
+G1 X0.300000 Y0.370000
+G1 X0.323333 Y0.356667
+G1 X0.328333 Y0.350000
+G1 X0.131667 Y0.350000
+G1 X0.145000 Y0.356667
+G1 X0.161667 Y0.361667
+G1 X0.178333 Y0.361667
+G1 X0.186667 Y0.370000
+G1 X0.186667 Y0.376667
+G1 X0.178333 Y0.385000
+G1 X0.161667 Y0.383333
+G1 X0.145000 Y0.380000
+G1 X0.116667 Y0.366667
+G1 X0.096667 Y0.350000
+G1 X0.025000 Y0.350000
+G1 X0.025000 Y0.023333
+G1 X0.476667 Y0.023333
+G1 X0.476667 Y0.350000
+G1 X0.366667 Y0.350000
+G1 X0.361667 Y0.360000
+G1 X0.338333 Y0.383333
+G1 X0.315000 Y0.398333
+G1 X0.286667 Y0.410000
+G1 X0.268333 Y0.413333
+G1 X0.246667 Y0.415000
+G0 Z#100
+(polygon end, distance 2.01)
+(polygon 2)
+G0 X0.065000 Y0.296667    (start point)
+G1 Z#101
+G1 X0.058333 Y0.293333
+G1 X0.051667 Y0.276667
+G1 X0.053333 Y0.246667
+G1 X0.061667 Y0.218333
+G1 X0.076667 Y0.190000
+G1 X0.095000 Y0.166667
+G1 X0.116667 Y0.150000
+G1 X0.128333 Y0.143333
+G1 X0.148333 Y0.133333
+G1 X0.178333 Y0.125000
+G1 X0.206667 Y0.125000
+G1 X0.220000 Y0.131667
+G1 X0.225000 Y0.145000
+G1 X0.225000 Y0.153333
+G1 X0.220000 Y0.166667
+G1 X0.206667 Y0.173333
+G1 X0.175000 Y0.176667
+G1 X0.151667 Y0.186667
+G1 X0.135000 Y0.198333
+G1 X0.123333 Y0.210000
+G1 X0.113333 Y0.225000
+G1 X0.105000 Y0.243333
+G1 X0.100000 Y0.263333
+G1 X0.100000 Y0.280000
+G1 X0.093333 Y0.293333
+G1 X0.090000 Y0.293333
+G1 X0.090000 Y0.290000
+G1 X0.078333 Y0.278333
+G1 X0.083333 Y0.275000
+G1 X0.083333 Y0.260000
+G1 X0.086667 Y0.243333
+G1 X0.096667 Y0.218333
+G1 X0.111667 Y0.195000
+G1 X0.126667 Y0.181667
+G1 X0.145000 Y0.170000
+G1 X0.175000 Y0.158333
+G1 X0.200000 Y0.156667
+G1 X0.206667 Y0.151667
+G1 X0.206667 Y0.146667
+G1 X0.201667 Y0.143333
+G1 X0.171667 Y0.146667
+G1 X0.141667 Y0.158333
+G1 X0.118333 Y0.173333
+G1 X0.100000 Y0.191667
+G1 X0.085000 Y0.215000
+G1 X0.075000 Y0.240000
+G1 X0.071667 Y0.260000
+G1 X0.070000 Y0.276667
+G1 X0.075000 Y0.280000
+G1 X0.066667 Y0.288333
+G1 X0.068333 Y0.296667
+G1 X0.065000 Y0.296667
+G0 Z#100
+(polygon end, distance 0.99)
+(polygon 3)
+G0 X0.293333 Y0.275000    (start point)
+G1 Z#101
+G1 X0.278333 Y0.268333
+G1 X0.270000 Y0.263333
+G1 X0.265000 Y0.253333
+G1 X0.265000 Y0.246667
+G1 X0.258333 Y0.241667
+G1 X0.251667 Y0.228333
+G1 X0.251667 Y0.215000
+G1 X0.260000 Y0.196667
+G1 X0.271667 Y0.183333
+G1 X0.290000 Y0.175000
+G1 X0.311667 Y0.175000
+G1 X0.330000 Y0.183333
+G1 X0.343333 Y0.198333
+G1 X0.350000 Y0.215000
+G1 X0.350000 Y0.233333
+G1 X0.343333 Y0.250000
+G1 X0.328333 Y0.266667
+G1 X0.306667 Y0.275000
+G1 X0.293333 Y0.275000
+G0 Z#100
+(polygon end, distance 0.31)
+(polygon 4)
+G0 X0.298333 Y0.255000    (start point)
+G1 Z#101
+G1 X0.288333 Y0.251667
+G1 X0.283333 Y0.248333
+G1 X0.283333 Y0.241667
+G1 X0.288333 Y0.238333
+G1 X0.296667 Y0.241667
+G1 X0.305000 Y0.241667
+G1 X0.313333 Y0.238333
+G1 X0.318333 Y0.228333
+G1 X0.318333 Y0.220000
+G1 X0.315000 Y0.211667
+G1 X0.305000 Y0.206667
+G1 X0.296667 Y0.206667
+G1 X0.286667 Y0.211667
+G1 X0.283333 Y0.221667
+G1 X0.281667 Y0.226667
+G1 X0.276667 Y0.230000
+G1 X0.271667 Y0.226667
+G1 X0.271667 Y0.215000
+G1 X0.280000 Y0.201667
+G1 X0.291667 Y0.195000
+G1 X0.310000 Y0.195000
+G1 X0.323333 Y0.203333
+G1 X0.330000 Y0.215000
+G1 X0.330000 Y0.233333
+G1 X0.323333 Y0.245000
+G1 X0.310000 Y0.253333
+G1 X0.298333 Y0.255000
+G0 Z#100
+(polygon end, distance 0.29)
+(end, total distance 91.68mm = 3.61in)
+M5 M9 M2
Index: ref/arc_normal.gcode/arc_normal.gcode.top.cnc
===================================================================
--- ref/arc_normal.gcode/arc_normal.gcode.top.cnc	(nonexistent)
+++ ref/arc_normal.gcode/arc_normal.gcode.top.cnc	(revision 27031)
@@ -0,0 +1,116 @@
+(Created by G-code exporter)
+(600 dpi)
+(Unit: inch)
+(Board size: 0.50x0.50 inches)#100=0.002000  (safe Z)
+#101=-0.000050  (cutting depth)
+(---------------------------------)
+G17 G20 G90 G64 P0.003 M3 S3000 M7 F1
+G0 Z#100
+(polygon 1)
+G0 X0.246667 Y0.415000    (start point)
+G1 Z#101
+G1 X0.220000 Y0.411667
+G1 X0.201667 Y0.405000
+G1 X0.193333 Y0.395000
+G1 X0.193333 Y0.386667
+G1 X0.205000 Y0.375000
+G1 X0.213333 Y0.375000
+G1 X0.226667 Y0.380000
+G1 X0.260000 Y0.381667
+G1 X0.280000 Y0.378333
+G1 X0.300000 Y0.370000
+G1 X0.323333 Y0.356667
+G1 X0.338333 Y0.340000
+G1 X0.353333 Y0.308333
+G1 X0.363333 Y0.300000
+G1 X0.371667 Y0.300000
+G1 X0.383333 Y0.311667
+G1 X0.383333 Y0.318333
+G1 X0.375000 Y0.338333
+G1 X0.360000 Y0.361667
+G1 X0.338333 Y0.383333
+G1 X0.315000 Y0.398333
+G1 X0.286667 Y0.410000
+G1 X0.268333 Y0.413333
+G1 X0.246667 Y0.415000
+G0 Z#100
+(polygon end, distance 0.49)
+(polygon 2)
+G0 X0.173333 Y0.385000    (start point)
+G1 Z#101
+G1 X0.151667 Y0.381667
+G1 X0.133333 Y0.375000
+G1 X0.111667 Y0.363333
+G1 X0.086667 Y0.338333
+G1 X0.075000 Y0.316667
+G1 X0.068333 Y0.298333
+G1 X0.066667 Y0.288333
+G1 X0.075000 Y0.280000
+G1 X0.070000 Y0.276667
+G1 X0.071667 Y0.260000
+G1 X0.075000 Y0.240000
+G1 X0.085000 Y0.215000
+G1 X0.100000 Y0.191667
+G1 X0.118333 Y0.173333
+G1 X0.141667 Y0.158333
+G1 X0.171667 Y0.146667
+G1 X0.201667 Y0.143333
+G1 X0.206667 Y0.146667
+G1 X0.206667 Y0.151667
+G1 X0.200000 Y0.156667
+G1 X0.175000 Y0.158333
+G1 X0.145000 Y0.170000
+G1 X0.126667 Y0.181667
+G1 X0.111667 Y0.195000
+G1 X0.096667 Y0.218333
+G1 X0.086667 Y0.243333
+G1 X0.083333 Y0.260000
+G1 X0.083333 Y0.275000
+G1 X0.078333 Y0.278333
+G1 X0.090000 Y0.290000
+G1 X0.091667 Y0.301667
+G1 X0.101667 Y0.323333
+G1 X0.123333 Y0.346667
+G1 X0.145000 Y0.356667
+G1 X0.161667 Y0.361667
+G1 X0.178333 Y0.361667
+G1 X0.186667 Y0.370000
+G1 X0.186667 Y0.376667
+G1 X0.178333 Y0.385000
+G1 X0.173333 Y0.385000
+G0 Z#100
+(polygon end, distance 0.77)
+(polygon 3)
+G0 X0.298333 Y0.255000    (start point)
+G1 Z#101
+G1 X0.288333 Y0.251667
+G1 X0.283333 Y0.248333
+G1 X0.283333 Y0.241667
+G1 X0.288333 Y0.238333
+G1 X0.296667 Y0.241667
+G1 X0.305000 Y0.241667
+G1 X0.313333 Y0.238333
+G1 X0.318333 Y0.228333
+G1 X0.318333 Y0.220000
+G1 X0.315000 Y0.211667
+G1 X0.305000 Y0.206667
+G1 X0.296667 Y0.206667
+G1 X0.286667 Y0.211667
+G1 X0.283333 Y0.221667
+G1 X0.281667 Y0.226667
+G1 X0.276667 Y0.230000
+G1 X0.271667 Y0.226667
+G1 X0.271667 Y0.215000
+G1 X0.280000 Y0.201667
+G1 X0.291667 Y0.195000
+G1 X0.310000 Y0.195000
+G1 X0.323333 Y0.203333
+G1 X0.330000 Y0.215000
+G1 X0.330000 Y0.233333
+G1 X0.323333 Y0.245000
+G1 X0.310000 Y0.253333
+G1 X0.298333 Y0.255000
+G0 Z#100
+(polygon end, distance 0.29)
+(end, total distance 39.35mm = 1.55in)
+M5 M9 M2
Index: ref/arc_offpage.gcode/arc_offpage.gcode.top.cnc
===================================================================
--- ref/arc_offpage.gcode/arc_offpage.gcode.top.cnc	(nonexistent)
+++ ref/arc_offpage.gcode/arc_offpage.gcode.top.cnc	(revision 27031)
@@ -0,0 +1,41 @@
+(Created by G-code exporter)
+(600 dpi)
+(Unit: inch)
+(Board size: 0.50x0.50 inches)#100=0.002000  (safe Z)
+#101=-0.000050  (cutting depth)
+(---------------------------------)
+G17 G20 G90 G64 P0.003 M3 S3000 M7 F1
+G0 Z#100
+(polygon 1)
+G0 X0.130000 Y0.500000    (start point)
+G1 Z#101
+G1 X0.130000 Y0.498333
+G1 X0.138333 Y0.480000
+G1 X0.143333 Y0.463333
+G1 X0.143333 Y0.435000
+G1 X0.138333 Y0.418333
+G1 X0.128333 Y0.396667
+G1 X0.106667 Y0.373333
+G1 X0.081667 Y0.361667
+G1 X0.065000 Y0.356667
+G1 X0.036667 Y0.356667
+G1 X0.020000 Y0.361667
+G1 X0.001667 Y0.370000
+G1 X0.000000 Y0.370000
+G1 X0.000000 Y0.356667
+G1 X0.021667 Y0.348333
+G1 X0.035000 Y0.345000
+G1 X0.065000 Y0.345000
+G1 X0.081667 Y0.348333
+G1 X0.110000 Y0.361667
+G1 X0.138333 Y0.390000
+G1 X0.151667 Y0.418333
+G1 X0.155000 Y0.435000
+G1 X0.155000 Y0.465000
+G1 X0.151667 Y0.478333
+G1 X0.143333 Y0.500000
+G1 X0.130000 Y0.500000
+G0 Z#100
+(polygon end, distance 0.55)
+(end, total distance 13.98mm = 0.55in)
+M5 M9 M2
Index: ref/arc_sizes.gcode/arc_sizes.gcode.top.cnc
===================================================================
--- ref/arc_sizes.gcode/arc_sizes.gcode.top.cnc	(nonexistent)
+++ ref/arc_sizes.gcode/arc_sizes.gcode.top.cnc	(revision 27031)
@@ -0,0 +1,44 @@
+(Created by G-code exporter)
+(600 dpi)
+(Unit: inch)
+(Board size: 0.50x0.50 inches)#100=0.002000  (safe Z)
+#101=-0.000050  (cutting depth)
+(---------------------------------)
+G17 G20 G90 G64 P0.003 M3 S3000 M7 F1
+G0 Z#100
+(polygon 1)
+G0 X0.098333 Y0.305000    (start point)
+G1 Z#101
+G1 X0.095000 Y0.300000
+G1 X0.096667 Y0.246667
+G1 X0.101667 Y0.243333
+G1 X0.106667 Y0.246667
+G1 X0.106667 Y0.301667
+G1 X0.103333 Y0.305000
+G1 X0.098333 Y0.305000
+G0 Z#100
+(polygon end, distance 0.14)
+(polygon 2)
+G0 X0.148333 Y0.305000    (start point)
+G1 Z#101
+G1 X0.145000 Y0.300000
+G1 X0.148333 Y0.295000
+G1 X0.203333 Y0.295000
+G1 X0.206667 Y0.300000
+G1 X0.203333 Y0.305000
+G1 X0.148333 Y0.305000
+G0 Z#100
+(polygon end, distance 0.13)
+(polygon 3)
+G0 X0.298333 Y0.305000    (start point)
+G1 Z#101
+G1 X0.295000 Y0.300000
+G1 X0.296667 Y0.295000
+G1 X0.301667 Y0.293333
+G1 X0.306667 Y0.298333
+G1 X0.303333 Y0.303333
+G1 X0.298333 Y0.305000
+G0 Z#100
+(polygon end, distance 0.03)
+(end, total distance 7.75mm = 0.31in)
+M5 M9 M2
Index: ref/comp1.gcode/comp1.gcode.bottom.cnc
===================================================================
--- ref/comp1.gcode/comp1.gcode.bottom.cnc	(nonexistent)
+++ ref/comp1.gcode/comp1.gcode.bottom.cnc	(revision 27031)
@@ -0,0 +1,38 @@
+(Created by G-code exporter)
+(600 dpi)
+(Unit: inch)
+(Board size: 0.50x0.50 inches)#100=0.002000  (safe Z)
+#101=-0.000050  (cutting depth)
+(---------------------------------)
+G17 G20 G90 G64 P0.003 M3 S3000 M7 F1
+G0 Z#100
+(polygon 1)
+G0 X0.241667 Y0.468333    (start point)
+G1 Z#101
+G1 X0.233333 Y0.465000
+G1 X0.223333 Y0.460000
+G1 X0.211667 Y0.446667
+G1 X0.206667 Y0.436667
+G1 X0.206667 Y0.411667
+G1 X0.213333 Y0.398333
+G1 X0.228333 Y0.385000
+G1 X0.021667 Y0.385000
+G1 X0.013333 Y0.376667
+G1 X0.013333 Y0.371667
+G1 X0.021667 Y0.363333
+G1 X0.476667 Y0.363333
+G1 X0.485000 Y0.371667
+G1 X0.485000 Y0.376667
+G1 X0.476667 Y0.385000
+G1 X0.270000 Y0.385000
+G1 X0.285000 Y0.398333
+G1 X0.291667 Y0.411667
+G1 X0.291667 Y0.436667
+G1 X0.286667 Y0.446667
+G1 X0.275000 Y0.460000
+G1 X0.261667 Y0.466667
+G1 X0.241667 Y0.468333
+G0 Z#100
+(polygon end, distance 1.16)
+(end, total distance 29.42mm = 1.16in)
+M5 M9 M2
Index: ref/comp1.gcode/comp1.gcode.drill.cnc
===================================================================
--- ref/comp1.gcode/comp1.gcode.drill.cnc	(nonexistent)
+++ ref/comp1.gcode/comp1.gcode.drill.cnc	(revision 27031)
@@ -0,0 +1,10 @@
+(Created by G-code exporter)
+(drill file: 1 drills)
+(Unit: inch)
+(Board size: 0.50x0.50 inches)#100=0.002000  (safe Z)
+#101=-0.002000  (drill depth)
+(---------------------------------)
+G17 G20 G90 G64 P0.003 M3 S3000 M7 F1
+G81 X0.250000 Y0.425000 Z#101 R#100
+M5 M9 M2
+(end, total distance 0.00mm = 0.00in)
Index: ref/comp1.gcode/comp1.gcode.group-1.cnc
===================================================================
--- ref/comp1.gcode/comp1.gcode.group-1.cnc	(nonexistent)
+++ ref/comp1.gcode/comp1.gcode.group-1.cnc	(revision 27031)
@@ -0,0 +1,32 @@
+(Created by G-code exporter)
+(600 dpi)
+(Unit: inch)
+(Board size: 0.50x0.50 inches)#100=0.002000  (safe Z)
+#101=-0.000050  (cutting depth)
+(---------------------------------)
+G17 G20 G90 G64 P0.003 M3 S3000 M7 F1
+G0 Z#100
+(polygon 1)
+G0 X0.243333 Y0.468333    (start point)
+G1 Z#101
+G1 X0.235000 Y0.465000
+G1 X0.225000 Y0.460000
+G1 X0.213333 Y0.446667
+G1 X0.208333 Y0.436667
+G1 X0.208333 Y0.411667
+G1 X0.213333 Y0.401667
+G1 X0.225000 Y0.388333
+G1 X0.238333 Y0.381667
+G1 X0.263333 Y0.381667
+G1 X0.276667 Y0.388333
+G1 X0.288333 Y0.401667
+G1 X0.293333 Y0.411667
+G1 X0.293333 Y0.436667
+G1 X0.288333 Y0.446667
+G1 X0.276667 Y0.460000
+G1 X0.263333 Y0.466667
+G1 X0.243333 Y0.468333
+G0 Z#100
+(polygon end, distance 0.28)
+(end, total distance 7.00mm = 0.28in)
+M5 M9 M2
Index: ref/comp1.gcode/comp1.gcode.top.cnc
===================================================================
--- ref/comp1.gcode/comp1.gcode.top.cnc	(nonexistent)
+++ ref/comp1.gcode/comp1.gcode.top.cnc	(revision 27031)
@@ -0,0 +1,45 @@
+(Created by G-code exporter)
+(600 dpi)
+(Unit: inch)
+(Board size: 0.50x0.50 inches)#100=0.002000  (safe Z)
+#101=-0.000050  (cutting depth)
+(---------------------------------)
+G17 G20 G90 G64 P0.003 M3 S3000 M7 F1
+G0 Z#100
+(polygon 1)
+G0 X0.243333 Y0.468333    (start point)
+G1 Z#101
+G1 X0.235000 Y0.465000
+G1 X0.225000 Y0.460000
+G1 X0.213333 Y0.446667
+G1 X0.208333 Y0.436667
+G1 X0.208333 Y0.411667
+G1 X0.213333 Y0.401667
+G1 X0.225000 Y0.388333
+G1 X0.238333 Y0.381667
+G1 X0.263333 Y0.381667
+G1 X0.276667 Y0.388333
+G1 X0.288333 Y0.401667
+G1 X0.293333 Y0.411667
+G1 X0.293333 Y0.436667
+G1 X0.288333 Y0.446667
+G1 X0.276667 Y0.460000
+G1 X0.263333 Y0.466667
+G1 X0.243333 Y0.468333
+G0 Z#100
+(polygon end, distance 0.28)
+(polygon 2)
+G0 X0.023333 Y0.360000    (start point)
+G1 Z#101
+G1 X0.015000 Y0.351667
+G1 X0.015000 Y0.346667
+G1 X0.023333 Y0.338333
+G1 X0.478333 Y0.338333
+G1 X0.486667 Y0.346667
+G1 X0.486667 Y0.351667
+G1 X0.478333 Y0.360000
+G1 X0.023333 Y0.360000
+G0 Z#100
+(polygon end, distance 0.97)
+(end, total distance 31.56mm = 1.24in)
+M5 M9 M2
Index: ref/coord_rounding.gcode/coord_rounding.gcode.top.cnc
===================================================================
--- ref/coord_rounding.gcode/coord_rounding.gcode.top.cnc	(nonexistent)
+++ ref/coord_rounding.gcode/coord_rounding.gcode.top.cnc	(revision 27031)
@@ -0,0 +1,24 @@
+(Created by G-code exporter)
+(600 dpi)
+(Unit: inch)
+(Board size: 0.50x0.50 inches)#100=0.002000  (safe Z)
+#101=-0.000050  (cutting depth)
+(---------------------------------)
+G17 G20 G90 G64 P0.003 M3 S3000 M7 F1
+G0 Z#100
+(polygon 1)
+G0 X0.233333 Y0.280000    (start point)
+G1 Z#101
+G1 X0.226667 Y0.276667
+G1 X0.218333 Y0.266667
+G1 X0.218333 Y0.251667
+G1 X0.230000 Y0.240000
+G1 X0.248333 Y0.240000
+G1 X0.260000 Y0.251667
+G1 X0.260000 Y0.266667
+G1 X0.248333 Y0.278333
+G1 X0.233333 Y0.280000
+G0 Z#100
+(polygon end, distance 0.13)
+(end, total distance 3.39mm = 0.13in)
+M5 M9 M2
Index: ref/elem_pads.gcode/elem_pads.gcode.top.cnc
===================================================================
--- ref/elem_pads.gcode/elem_pads.gcode.top.cnc	(nonexistent)
+++ ref/elem_pads.gcode/elem_pads.gcode.top.cnc	(revision 27031)
@@ -0,0 +1,73 @@
+(Created by G-code exporter)
+(600 dpi)
+(Unit: inch)
+(Board size: 0.50x0.50 inches)#100=0.002000  (safe Z)
+#101=-0.000050  (cutting depth)
+(---------------------------------)
+G17 G20 G90 G64 P0.003 M3 S3000 M7 F1
+G0 Z#100
+(polygon 1)
+G0 X0.165000 Y0.436667    (start point)
+G1 Z#101
+G1 X0.165000 Y0.361667
+G1 X0.218333 Y0.361667
+G1 X0.218333 Y0.436667
+G1 X0.165000 Y0.436667
+G0 Z#100
+(polygon end, distance 0.26)
+(polygon 2)
+G0 X0.283333 Y0.436667    (start point)
+G1 Z#101
+G1 X0.283333 Y0.361667
+G1 X0.336667 Y0.361667
+G1 X0.336667 Y0.436667
+G1 X0.283333 Y0.436667
+G0 Z#100
+(polygon end, distance 0.26)
+(polygon 3)
+G0 X0.216667 Y0.211667    (start point)
+G1 Z#101
+G1 X0.216667 Y0.175000
+G1 X0.233333 Y0.175000
+G1 X0.233333 Y0.211667
+G1 X0.216667 Y0.211667
+G0 Z#100
+(polygon end, distance 0.11)
+(polygon 4)
+G0 X0.243333 Y0.211667    (start point)
+G1 Z#101
+G1 X0.243333 Y0.175000
+G1 X0.260000 Y0.175000
+G1 X0.260000 Y0.211667
+G1 X0.243333 Y0.211667
+G0 Z#100
+(polygon end, distance 0.11)
+(polygon 5)
+G0 X0.268333 Y0.211667    (start point)
+G1 Z#101
+G1 X0.268333 Y0.175000
+G1 X0.283333 Y0.175000
+G1 X0.283333 Y0.211667
+G1 X0.268333 Y0.211667
+G0 Z#100
+(polygon end, distance 0.10)
+(polygon 6)
+G0 X0.216667 Y0.141667    (start point)
+G1 Z#101
+G1 X0.216667 Y0.105000
+G1 X0.233333 Y0.105000
+G1 X0.233333 Y0.141667
+G1 X0.216667 Y0.141667
+G0 Z#100
+(polygon end, distance 0.11)
+(polygon 7)
+G0 X0.268333 Y0.141667    (start point)
+G1 Z#101
+G1 X0.268333 Y0.105000
+G1 X0.283333 Y0.105000
+G1 X0.283333 Y0.141667
+G1 X0.268333 Y0.141667
+G0 Z#100
+(polygon end, distance 0.10)
+(end, total distance 26.42mm = 1.04in)
+M5 M9 M2
Index: ref/elem_pads_ds.gcode/elem_pads_ds.gcode.bottom.cnc
===================================================================
--- ref/elem_pads_ds.gcode/elem_pads_ds.gcode.bottom.cnc	(nonexistent)
+++ ref/elem_pads_ds.gcode/elem_pads_ds.gcode.bottom.cnc	(revision 27031)
@@ -0,0 +1,22 @@
+(Created by G-code exporter)
+(600 dpi)
+(Unit: inch)
+(Board size: 0.50x0.50 inches)#100=0.002000  (safe Z)
+#101=-0.000050  (cutting depth)
+(---------------------------------)
+G17 G20 G90 G64 P0.003 M3 S3000 M7 F1
+G0 Z#100
+(polygon 1)
+G0 X0.221667 Y0.330000    (start point)
+G1 Z#101
+G1 X0.218333 Y0.326667
+G1 X0.218333 Y0.246667
+G1 X0.223333 Y0.243333
+G1 X0.228333 Y0.246667
+G1 X0.230000 Y0.325000
+G1 X0.226667 Y0.330000
+G1 X0.221667 Y0.330000
+G0 Z#100
+(polygon end, distance 0.19)
+(end, total distance 4.73mm = 0.19in)
+M5 M9 M2
Index: ref/elem_pads_ds.gcode/elem_pads_ds.gcode.drill.cnc
===================================================================
--- ref/elem_pads_ds.gcode/elem_pads_ds.gcode.drill.cnc	(nonexistent)
+++ ref/elem_pads_ds.gcode/elem_pads_ds.gcode.drill.cnc	(revision 27031)
@@ -0,0 +1,9 @@
+(Created by G-code exporter)
+(drill file: 0 drills)
+(Unit: inch)
+(Board size: 0.50x0.50 inches)#100=0.002000  (safe Z)
+#101=-0.002000  (drill depth)
+(---------------------------------)
+G17 G20 G90 G64 P0.003 M3 S3000 M7 F1
+M5 M9 M2
+(end, total distance 0.00mm = 0.00in)
Index: ref/elem_pads_ds.gcode/elem_pads_ds.gcode.top.cnc
===================================================================
--- ref/elem_pads_ds.gcode/elem_pads_ds.gcode.top.cnc	(nonexistent)
+++ ref/elem_pads_ds.gcode/elem_pads_ds.gcode.top.cnc	(revision 27031)
@@ -0,0 +1,21 @@
+(Created by G-code exporter)
+(600 dpi)
+(Unit: inch)
+(Board size: 0.50x0.50 inches)#100=0.002000  (safe Z)
+#101=-0.000050  (cutting depth)
+(---------------------------------)
+G17 G20 G90 G64 P0.003 M3 S3000 M7 F1
+G0 Z#100
+(polygon 1)
+G0 X0.173333 Y0.355000    (start point)
+G1 Z#101
+G1 X0.170000 Y0.350000
+G1 X0.173333 Y0.345000
+G1 X0.253333 Y0.345000
+G1 X0.256667 Y0.350000
+G1 X0.253333 Y0.355000
+G1 X0.173333 Y0.355000
+G0 Z#100
+(polygon end, distance 0.18)
+(end, total distance 4.67mm = 0.18in)
+M5 M9 M2
Index: ref/elem_pins.gcode/elem_pins.gcode.bottom.cnc
===================================================================
--- ref/elem_pins.gcode/elem_pins.gcode.bottom.cnc	(nonexistent)
+++ ref/elem_pins.gcode/elem_pins.gcode.bottom.cnc	(revision 27031)
@@ -0,0 +1,66 @@
+(Created by G-code exporter)
+(600 dpi)
+(Unit: inch)
+(Board size: 0.50x0.50 inches)#100=0.002000  (safe Z)
+#101=-0.000050  (cutting depth)
+(---------------------------------)
+G17 G20 G90 G64 P0.003 M3 S3000 M7 F1
+G0 Z#100
+(polygon 1)
+G0 X0.116667 Y0.415000    (start point)
+G1 Z#101
+G1 X0.106667 Y0.411667
+G1 X0.086667 Y0.391667
+G1 X0.083333 Y0.378333
+G1 X0.083333 Y0.370000
+G1 X0.086667 Y0.356667
+G1 X0.106667 Y0.336667
+G1 X0.120000 Y0.333333
+G1 X0.128333 Y0.333333
+G1 X0.141667 Y0.336667
+G1 X0.161667 Y0.356667
+G1 X0.165000 Y0.370000
+G1 X0.165000 Y0.378333
+G1 X0.161667 Y0.391667
+G1 X0.141667 Y0.411667
+G1 X0.128333 Y0.415000
+G1 X0.116667 Y0.415000
+G0 Z#100
+(polygon end, distance 0.26)
+(polygon 2)
+G0 X0.383333 Y0.415000    (start point)
+G1 Z#101
+G1 X0.383333 Y0.333333
+G1 X0.465000 Y0.333333
+G1 X0.465000 Y0.415000
+G1 X0.383333 Y0.415000
+G0 Z#100
+(polygon end, distance 0.33)
+(polygon 3)
+G0 X0.090000 Y0.255000    (start point)
+G1 Z#101
+G1 X0.043333 Y0.206667
+G1 X0.043333 Y0.156667
+G1 X0.091667 Y0.133333
+G1 X0.156667 Y0.133333
+G1 X0.205000 Y0.156667
+G1 X0.205000 Y0.208333
+G1 X0.156667 Y0.255000
+G1 X0.090000 Y0.255000
+G0 Z#100
+(polygon end, distance 0.48)
+(polygon 4)
+G0 X0.390000 Y0.215000    (start point)
+G1 Z#101
+G1 X0.343333 Y0.191667
+G1 X0.343333 Y0.156667
+G1 X0.391667 Y0.133333
+G1 X0.441667 Y0.133333
+G1 X0.465000 Y0.158333
+G1 X0.465000 Y0.190000
+G1 X0.441667 Y0.215000
+G1 X0.390000 Y0.215000
+G0 Z#100
+(polygon end, distance 0.34)
+(end, total distance 35.58mm = 1.40in)
+M5 M9 M2
Index: ref/elem_pins.gcode/elem_pins.gcode.drill.cnc
===================================================================
--- ref/elem_pins.gcode/elem_pins.gcode.drill.cnc	(nonexistent)
+++ ref/elem_pins.gcode/elem_pins.gcode.drill.cnc	(revision 27031)
@@ -0,0 +1,13 @@
+(Created by G-code exporter)
+(drill file: 4 drills)
+(Unit: inch)
+(Board size: 0.50x0.50 inches)#100=0.002000  (safe Z)
+#101=-0.002000  (drill depth)
+(---------------------------------)
+G17 G20 G90 G64 P0.003 M3 S3000 M7 F1
+G81 X0.125000 Y0.175000 Z#101 R#100
+G81 X0.125000 Y0.375000 Z#101 R#100
+G81 X0.425000 Y0.375000 Z#101 R#100
+G81 X0.425000 Y0.175000 Z#101 R#100
+M5 M9 M2
+(end, total distance 17.78mm = 0.70in)
Index: ref/elem_pins.gcode/elem_pins.gcode.group-1.cnc
===================================================================
--- ref/elem_pins.gcode/elem_pins.gcode.group-1.cnc	(nonexistent)
+++ ref/elem_pins.gcode/elem_pins.gcode.group-1.cnc	(revision 27031)
@@ -0,0 +1,66 @@
+(Created by G-code exporter)
+(600 dpi)
+(Unit: inch)
+(Board size: 0.50x0.50 inches)#100=0.002000  (safe Z)
+#101=-0.000050  (cutting depth)
+(---------------------------------)
+G17 G20 G90 G64 P0.003 M3 S3000 M7 F1
+G0 Z#100
+(polygon 1)
+G0 X0.035000 Y0.415000    (start point)
+G1 Z#101
+G1 X0.035000 Y0.333333
+G1 X0.116667 Y0.333333
+G1 X0.116667 Y0.415000
+G1 X0.035000 Y0.415000
+G0 Z#100
+(polygon end, distance 0.33)
+(polygon 2)
+G0 X0.368333 Y0.415000    (start point)
+G1 Z#101
+G1 X0.358333 Y0.411667
+G1 X0.338333 Y0.391667
+G1 X0.335000 Y0.378333
+G1 X0.335000 Y0.370000
+G1 X0.338333 Y0.356667
+G1 X0.358333 Y0.336667
+G1 X0.371667 Y0.333333
+G1 X0.380000 Y0.333333
+G1 X0.393333 Y0.336667
+G1 X0.413333 Y0.356667
+G1 X0.416667 Y0.370000
+G1 X0.416667 Y0.378333
+G1 X0.413333 Y0.391667
+G1 X0.393333 Y0.411667
+G1 X0.380000 Y0.415000
+G1 X0.368333 Y0.415000
+G0 Z#100
+(polygon end, distance 0.26)
+(polygon 3)
+G0 X0.341667 Y0.255000    (start point)
+G1 Z#101
+G1 X0.295000 Y0.206667
+G1 X0.295000 Y0.156667
+G1 X0.343333 Y0.133333
+G1 X0.408333 Y0.133333
+G1 X0.456667 Y0.156667
+G1 X0.456667 Y0.208333
+G1 X0.408333 Y0.255000
+G1 X0.341667 Y0.255000
+G0 Z#100
+(polygon end, distance 0.48)
+(polygon 4)
+G0 X0.058333 Y0.215000    (start point)
+G1 Z#101
+G1 X0.035000 Y0.190000
+G1 X0.035000 Y0.158333
+G1 X0.058333 Y0.133333
+G1 X0.108333 Y0.133333
+G1 X0.156667 Y0.156667
+G1 X0.156667 Y0.191667
+G1 X0.108333 Y0.215000
+G1 X0.058333 Y0.215000
+G0 Z#100
+(polygon end, distance 0.34)
+(end, total distance 35.58mm = 1.40in)
+M5 M9 M2
Index: ref/elem_pins.gcode/elem_pins.gcode.top.cnc
===================================================================
--- ref/elem_pins.gcode/elem_pins.gcode.top.cnc	(nonexistent)
+++ ref/elem_pins.gcode/elem_pins.gcode.top.cnc	(revision 27031)
@@ -0,0 +1,66 @@
+(Created by G-code exporter)
+(600 dpi)
+(Unit: inch)
+(Board size: 0.50x0.50 inches)#100=0.002000  (safe Z)
+#101=-0.000050  (cutting depth)
+(---------------------------------)
+G17 G20 G90 G64 P0.003 M3 S3000 M7 F1
+G0 Z#100
+(polygon 1)
+G0 X0.035000 Y0.415000    (start point)
+G1 Z#101
+G1 X0.035000 Y0.333333
+G1 X0.116667 Y0.333333
+G1 X0.116667 Y0.415000
+G1 X0.035000 Y0.415000
+G0 Z#100
+(polygon end, distance 0.33)
+(polygon 2)
+G0 X0.368333 Y0.415000    (start point)
+G1 Z#101
+G1 X0.358333 Y0.411667
+G1 X0.338333 Y0.391667
+G1 X0.335000 Y0.378333
+G1 X0.335000 Y0.370000
+G1 X0.338333 Y0.356667
+G1 X0.358333 Y0.336667
+G1 X0.371667 Y0.333333
+G1 X0.380000 Y0.333333
+G1 X0.393333 Y0.336667
+G1 X0.413333 Y0.356667
+G1 X0.416667 Y0.370000
+G1 X0.416667 Y0.378333
+G1 X0.413333 Y0.391667
+G1 X0.393333 Y0.411667
+G1 X0.380000 Y0.415000
+G1 X0.368333 Y0.415000
+G0 Z#100
+(polygon end, distance 0.26)
+(polygon 3)
+G0 X0.341667 Y0.255000    (start point)
+G1 Z#101
+G1 X0.295000 Y0.206667
+G1 X0.295000 Y0.156667
+G1 X0.343333 Y0.133333
+G1 X0.408333 Y0.133333
+G1 X0.456667 Y0.156667
+G1 X0.456667 Y0.208333
+G1 X0.408333 Y0.255000
+G1 X0.341667 Y0.255000
+G0 Z#100
+(polygon end, distance 0.48)
+(polygon 4)
+G0 X0.058333 Y0.215000    (start point)
+G1 Z#101
+G1 X0.035000 Y0.190000
+G1 X0.035000 Y0.158333
+G1 X0.058333 Y0.133333
+G1 X0.108333 Y0.133333
+G1 X0.156667 Y0.156667
+G1 X0.156667 Y0.191667
+G1 X0.108333 Y0.215000
+G1 X0.058333 Y0.215000
+G0 Z#100
+(polygon end, distance 0.34)
+(end, total distance 35.58mm = 1.40in)
+M5 M9 M2
Index: ref/elem_sides_smd.gcode/elem_sides_smd.gcode.bottom.cnc
===================================================================
--- ref/elem_sides_smd.gcode/elem_sides_smd.gcode.bottom.cnc	(nonexistent)
+++ ref/elem_sides_smd.gcode/elem_sides_smd.gcode.bottom.cnc	(revision 27031)
@@ -0,0 +1,28 @@
+(Created by G-code exporter)
+(600 dpi)
+(Unit: inch)
+(Board size: 0.50x0.50 inches)#100=0.002000  (safe Z)
+#101=-0.000050  (cutting depth)
+(---------------------------------)
+G17 G20 G90 G64 P0.003 M3 S3000 M7 F1
+G0 Z#100
+(polygon 1)
+G0 X0.188333 Y0.186667    (start point)
+G1 Z#101
+G1 X0.188333 Y0.111667
+G1 X0.241667 Y0.111667
+G1 X0.241667 Y0.186667
+G1 X0.188333 Y0.186667
+G0 Z#100
+(polygon end, distance 0.26)
+(polygon 2)
+G0 X0.306667 Y0.186667    (start point)
+G1 Z#101
+G1 X0.306667 Y0.111667
+G1 X0.360000 Y0.111667
+G1 X0.360000 Y0.186667
+G1 X0.306667 Y0.186667
+G0 Z#100
+(polygon end, distance 0.26)
+(end, total distance 13.04mm = 0.51in)
+M5 M9 M2
Index: ref/elem_sides_smd.gcode/elem_sides_smd.gcode.drill.cnc
===================================================================
--- ref/elem_sides_smd.gcode/elem_sides_smd.gcode.drill.cnc	(nonexistent)
+++ ref/elem_sides_smd.gcode/elem_sides_smd.gcode.drill.cnc	(revision 27031)
@@ -0,0 +1,9 @@
+(Created by G-code exporter)
+(drill file: 0 drills)
+(Unit: inch)
+(Board size: 0.50x0.50 inches)#100=0.002000  (safe Z)
+#101=-0.002000  (drill depth)
+(---------------------------------)
+G17 G20 G90 G64 P0.003 M3 S3000 M7 F1
+M5 M9 M2
+(end, total distance 0.00mm = 0.00in)
Index: ref/elem_sides_smd.gcode/elem_sides_smd.gcode.top.cnc
===================================================================
--- ref/elem_sides_smd.gcode/elem_sides_smd.gcode.top.cnc	(nonexistent)
+++ ref/elem_sides_smd.gcode/elem_sides_smd.gcode.top.cnc	(revision 27031)
@@ -0,0 +1,28 @@
+(Created by G-code exporter)
+(600 dpi)
+(Unit: inch)
+(Board size: 0.50x0.50 inches)#100=0.002000  (safe Z)
+#101=-0.000050  (cutting depth)
+(---------------------------------)
+G17 G20 G90 G64 P0.003 M3 S3000 M7 F1
+G0 Z#100
+(polygon 1)
+G0 X0.140000 Y0.411667    (start point)
+G1 Z#101
+G1 X0.140000 Y0.336667
+G1 X0.193333 Y0.336667
+G1 X0.193333 Y0.411667
+G1 X0.140000 Y0.411667
+G0 Z#100
+(polygon end, distance 0.26)
+(polygon 2)
+G0 X0.258333 Y0.411667    (start point)
+G1 Z#101
+G1 X0.258333 Y0.336667
+G1 X0.311667 Y0.336667
+G1 X0.311667 Y0.411667
+G1 X0.258333 Y0.411667
+G0 Z#100
+(polygon end, distance 0.26)
+(end, total distance 13.04mm = 0.51in)
+M5 M9 M2
Index: ref/elem_sides_trh.gcode/elem_sides_trh.gcode.bottom.cnc
===================================================================
--- ref/elem_sides_trh.gcode/elem_sides_trh.gcode.bottom.cnc	(nonexistent)
+++ ref/elem_sides_trh.gcode/elem_sides_trh.gcode.bottom.cnc	(revision 27031)
@@ -0,0 +1,70 @@
+(Created by G-code exporter)
+(600 dpi)
+(Unit: inch)
+(Board size: 0.50x0.50 inches)#100=0.002000  (safe Z)
+#101=-0.000050  (cutting depth)
+(---------------------------------)
+G17 G20 G90 G64 P0.003 M3 S3000 M7 F1
+G0 Z#100
+(polygon 1)
+G0 X0.091667 Y0.390000    (start point)
+G1 Z#101
+G1 X0.081667 Y0.386667
+G1 X0.061667 Y0.366667
+G1 X0.058333 Y0.353333
+G1 X0.058333 Y0.345000
+G1 X0.061667 Y0.331667
+G1 X0.081667 Y0.311667
+G1 X0.095000 Y0.308333
+G1 X0.103333 Y0.308333
+G1 X0.116667 Y0.311667
+G1 X0.136667 Y0.331667
+G1 X0.140000 Y0.345000
+G1 X0.140000 Y0.353333
+G1 X0.136667 Y0.366667
+G1 X0.116667 Y0.386667
+G1 X0.103333 Y0.390000
+G1 X0.091667 Y0.390000
+G0 Z#100
+(polygon end, distance 0.26)
+(polygon 2)
+G0 X0.358333 Y0.390000    (start point)
+G1 Z#101
+G1 X0.358333 Y0.308333
+G1 X0.440000 Y0.308333
+G1 X0.440000 Y0.390000
+G1 X0.358333 Y0.390000
+G0 Z#100
+(polygon end, distance 0.33)
+(polygon 3)
+G0 X0.091667 Y0.190000    (start point)
+G1 Z#101
+G1 X0.081667 Y0.186667
+G1 X0.061667 Y0.166667
+G1 X0.058333 Y0.153333
+G1 X0.058333 Y0.145000
+G1 X0.061667 Y0.131667
+G1 X0.081667 Y0.111667
+G1 X0.095000 Y0.108333
+G1 X0.103333 Y0.108333
+G1 X0.116667 Y0.111667
+G1 X0.136667 Y0.131667
+G1 X0.140000 Y0.145000
+G1 X0.140000 Y0.153333
+G1 X0.136667 Y0.166667
+G1 X0.116667 Y0.186667
+G1 X0.103333 Y0.190000
+G1 X0.091667 Y0.190000
+G0 Z#100
+(polygon end, distance 0.26)
+(polygon 4)
+G0 X0.358333 Y0.190000    (start point)
+G1 Z#101
+G1 X0.358333 Y0.108333
+G1 X0.440000 Y0.108333
+G1 X0.440000 Y0.190000
+G1 X0.358333 Y0.190000
+G0 Z#100
+(polygon end, distance 0.33)
+(end, total distance 29.63mm = 1.17in)
+M5 M9 M2
Index: ref/elem_sides_trh.gcode/elem_sides_trh.gcode.drill.cnc
===================================================================
--- ref/elem_sides_trh.gcode/elem_sides_trh.gcode.drill.cnc	(nonexistent)
+++ ref/elem_sides_trh.gcode/elem_sides_trh.gcode.drill.cnc	(revision 27031)
@@ -0,0 +1,13 @@
+(Created by G-code exporter)
+(drill file: 4 drills)
+(Unit: inch)
+(Board size: 0.50x0.50 inches)#100=0.002000  (safe Z)
+#101=-0.002000  (drill depth)
+(---------------------------------)
+G17 G20 G90 G64 P0.003 M3 S3000 M7 F1
+G81 X0.100000 Y0.150000 Z#101 R#100
+G81 X0.100000 Y0.350000 Z#101 R#100
+G81 X0.400000 Y0.350000 Z#101 R#100
+G81 X0.400000 Y0.150000 Z#101 R#100
+M5 M9 M2
+(end, total distance 17.78mm = 0.70in)
Index: ref/elem_sides_trh.gcode/elem_sides_trh.gcode.group-1.cnc
===================================================================
--- ref/elem_sides_trh.gcode/elem_sides_trh.gcode.group-1.cnc	(nonexistent)
+++ ref/elem_sides_trh.gcode/elem_sides_trh.gcode.group-1.cnc	(revision 27031)
@@ -0,0 +1,70 @@
+(Created by G-code exporter)
+(600 dpi)
+(Unit: inch)
+(Board size: 0.50x0.50 inches)#100=0.002000  (safe Z)
+#101=-0.000050  (cutting depth)
+(---------------------------------)
+G17 G20 G90 G64 P0.003 M3 S3000 M7 F1
+G0 Z#100
+(polygon 1)
+G0 X0.060000 Y0.390000    (start point)
+G1 Z#101
+G1 X0.060000 Y0.308333
+G1 X0.141667 Y0.308333
+G1 X0.141667 Y0.390000
+G1 X0.060000 Y0.390000
+G0 Z#100
+(polygon end, distance 0.33)
+(polygon 2)
+G0 X0.393333 Y0.390000    (start point)
+G1 Z#101
+G1 X0.383333 Y0.386667
+G1 X0.363333 Y0.366667
+G1 X0.360000 Y0.353333
+G1 X0.360000 Y0.345000
+G1 X0.363333 Y0.331667
+G1 X0.383333 Y0.311667
+G1 X0.396667 Y0.308333
+G1 X0.405000 Y0.308333
+G1 X0.418333 Y0.311667
+G1 X0.438333 Y0.331667
+G1 X0.441667 Y0.345000
+G1 X0.441667 Y0.353333
+G1 X0.438333 Y0.366667
+G1 X0.418333 Y0.386667
+G1 X0.405000 Y0.390000
+G1 X0.393333 Y0.390000
+G0 Z#100
+(polygon end, distance 0.26)
+(polygon 3)
+G0 X0.060000 Y0.190000    (start point)
+G1 Z#101
+G1 X0.060000 Y0.108333
+G1 X0.141667 Y0.108333
+G1 X0.141667 Y0.190000
+G1 X0.060000 Y0.190000
+G0 Z#100
+(polygon end, distance 0.33)
+(polygon 4)
+G0 X0.393333 Y0.190000    (start point)
+G1 Z#101
+G1 X0.383333 Y0.186667
+G1 X0.363333 Y0.166667
+G1 X0.360000 Y0.153333
+G1 X0.360000 Y0.145000
+G1 X0.363333 Y0.131667
+G1 X0.383333 Y0.111667
+G1 X0.396667 Y0.108333
+G1 X0.405000 Y0.108333
+G1 X0.418333 Y0.111667
+G1 X0.438333 Y0.131667
+G1 X0.441667 Y0.145000
+G1 X0.441667 Y0.153333
+G1 X0.438333 Y0.166667
+G1 X0.418333 Y0.186667
+G1 X0.405000 Y0.190000
+G1 X0.393333 Y0.190000
+G0 Z#100
+(polygon end, distance 0.26)
+(end, total distance 29.63mm = 1.17in)
+M5 M9 M2
Index: ref/elem_sides_trh.gcode/elem_sides_trh.gcode.top.cnc
===================================================================
--- ref/elem_sides_trh.gcode/elem_sides_trh.gcode.top.cnc	(nonexistent)
+++ ref/elem_sides_trh.gcode/elem_sides_trh.gcode.top.cnc	(revision 27031)
@@ -0,0 +1,70 @@
+(Created by G-code exporter)
+(600 dpi)
+(Unit: inch)
+(Board size: 0.50x0.50 inches)#100=0.002000  (safe Z)
+#101=-0.000050  (cutting depth)
+(---------------------------------)
+G17 G20 G90 G64 P0.003 M3 S3000 M7 F1
+G0 Z#100
+(polygon 1)
+G0 X0.060000 Y0.390000    (start point)
+G1 Z#101
+G1 X0.060000 Y0.308333
+G1 X0.141667 Y0.308333
+G1 X0.141667 Y0.390000
+G1 X0.060000 Y0.390000
+G0 Z#100
+(polygon end, distance 0.33)
+(polygon 2)
+G0 X0.393333 Y0.390000    (start point)
+G1 Z#101
+G1 X0.383333 Y0.386667
+G1 X0.363333 Y0.366667
+G1 X0.360000 Y0.353333
+G1 X0.360000 Y0.345000
+G1 X0.363333 Y0.331667
+G1 X0.383333 Y0.311667
+G1 X0.396667 Y0.308333
+G1 X0.405000 Y0.308333
+G1 X0.418333 Y0.311667
+G1 X0.438333 Y0.331667
+G1 X0.441667 Y0.345000
+G1 X0.441667 Y0.353333
+G1 X0.438333 Y0.366667
+G1 X0.418333 Y0.386667
+G1 X0.405000 Y0.390000
+G1 X0.393333 Y0.390000
+G0 Z#100
+(polygon end, distance 0.26)
+(polygon 3)
+G0 X0.060000 Y0.190000    (start point)
+G1 Z#101
+G1 X0.060000 Y0.108333
+G1 X0.141667 Y0.108333
+G1 X0.141667 Y0.190000
+G1 X0.060000 Y0.190000
+G0 Z#100
+(polygon end, distance 0.33)
+(polygon 4)
+G0 X0.393333 Y0.190000    (start point)
+G1 Z#101
+G1 X0.383333 Y0.186667
+G1 X0.363333 Y0.166667
+G1 X0.360000 Y0.153333
+G1 X0.360000 Y0.145000
+G1 X0.363333 Y0.131667
+G1 X0.383333 Y0.111667
+G1 X0.396667 Y0.108333
+G1 X0.405000 Y0.108333
+G1 X0.418333 Y0.111667
+G1 X0.438333 Y0.131667
+G1 X0.441667 Y0.145000
+G1 X0.441667 Y0.153333
+G1 X0.438333 Y0.166667
+G1 X0.418333 Y0.186667
+G1 X0.405000 Y0.190000
+G1 X0.393333 Y0.190000
+G0 Z#100
+(polygon end, distance 0.26)
+(end, total distance 29.63mm = 1.17in)
+M5 M9 M2
Index: ref/layer_copper.gcode/layer_copper.gcode.bottom.cnc
===================================================================
--- ref/layer_copper.gcode/layer_copper.gcode.bottom.cnc	(nonexistent)
+++ ref/layer_copper.gcode/layer_copper.gcode.bottom.cnc	(revision 27031)
@@ -0,0 +1,21 @@
+(Created by G-code exporter)
+(600 dpi)
+(Unit: inch)
+(Board size: 0.50x0.50 inches)#100=0.002000  (safe Z)
+#101=-0.000050  (cutting depth)
+(---------------------------------)
+G17 G20 G90 G64 P0.003 M3 S3000 M7 F1
+G0 Z#100
+(polygon 1)
+G0 X0.096667 Y0.430000    (start point)
+G1 Z#101
+G1 X0.093333 Y0.425000
+G1 X0.096667 Y0.420000
+G1 X0.426667 Y0.420000
+G1 X0.430000 Y0.425000
+G1 X0.426667 Y0.430000
+G1 X0.096667 Y0.430000
+G0 Z#100
+(polygon end, distance 0.68)
+(end, total distance 17.37mm = 0.68in)
+M5 M9 M2
Index: ref/layer_copper.gcode/layer_copper.gcode.drill.cnc
===================================================================
--- ref/layer_copper.gcode/layer_copper.gcode.drill.cnc	(nonexistent)
+++ ref/layer_copper.gcode/layer_copper.gcode.drill.cnc	(revision 27031)
@@ -0,0 +1,9 @@
+(Created by G-code exporter)
+(drill file: 0 drills)
+(Unit: inch)
+(Board size: 0.50x0.50 inches)#100=0.002000  (safe Z)
+#101=-0.002000  (drill depth)
+(---------------------------------)
+G17 G20 G90 G64 P0.003 M3 S3000 M7 F1
+M5 M9 M2
+(end, total distance 0.00mm = 0.00in)
Index: ref/layer_copper.gcode/layer_copper.gcode.group-1.cnc
===================================================================
--- ref/layer_copper.gcode/layer_copper.gcode.group-1.cnc	(nonexistent)
+++ ref/layer_copper.gcode/layer_copper.gcode.group-1.cnc	(revision 27031)
@@ -0,0 +1,22 @@
+(Created by G-code exporter)
+(600 dpi)
+(Unit: inch)
+(Board size: 0.50x0.50 inches)#100=0.002000  (safe Z)
+#101=-0.000050  (cutting depth)
+(---------------------------------)
+G17 G20 G90 G64 P0.003 M3 S3000 M7 F1
+G0 Z#100
+(polygon 1)
+G0 X0.098333 Y0.355000    (start point)
+G1 Z#101
+G1 X0.095000 Y0.351667
+G1 X0.095000 Y0.346667
+G1 X0.325000 Y0.118333
+G1 X0.330000 Y0.120000
+G1 X0.331667 Y0.125000
+G1 X0.103333 Y0.355000
+G1 X0.098333 Y0.355000
+G0 Z#100
+(polygon end, distance 0.67)
+(end, total distance 17.11mm = 0.67in)
+M5 M9 M2
Index: ref/layer_copper.gcode/layer_copper.gcode.top.cnc
===================================================================
--- ref/layer_copper.gcode/layer_copper.gcode.top.cnc	(nonexistent)
+++ ref/layer_copper.gcode/layer_copper.gcode.top.cnc	(revision 27031)
@@ -0,0 +1,22 @@
+(Created by G-code exporter)
+(600 dpi)
+(Unit: inch)
+(Board size: 0.50x0.50 inches)#100=0.002000  (safe Z)
+#101=-0.000050  (cutting depth)
+(---------------------------------)
+G17 G20 G90 G64 P0.003 M3 S3000 M7 F1
+G0 Z#100
+(polygon 1)
+G0 X0.048333 Y0.430000    (start point)
+G1 Z#101
+G1 X0.045000 Y0.426667
+G1 X0.045000 Y0.146667
+G1 X0.050000 Y0.143333
+G1 X0.055000 Y0.146667
+G1 X0.056667 Y0.425000
+G1 X0.053333 Y0.430000
+G1 X0.048333 Y0.430000
+G0 Z#100
+(polygon end, distance 0.59)
+(end, total distance 14.89mm = 0.59in)
+M5 M9 M2
Index: ref/layer_outline.gcode/layer_outline.gcode.outline.cnc
===================================================================
--- ref/layer_outline.gcode/layer_outline.gcode.outline.cnc	(nonexistent)
+++ ref/layer_outline.gcode/layer_outline.gcode.outline.cnc	(revision 27031)
@@ -0,0 +1,31 @@
+(Created by G-code exporter)
+(600 dpi)
+(Unit: inch)
+(Board size: 0.50x0.50 inches)#100=0.002000  (safe Z)
+#101=-0.000050  (cutting depth)
+(---------------------------------)
+G17 G20 G90 G64 P0.003 M3 S3000 M7 F1
+G0 Z#100
+(polygon 1)
+G0 X0.073333 Y0.405000    (start point)
+G1 Z#101
+G1 X0.070000 Y0.401667
+G1 X0.070000 Y0.096667
+G1 X0.075000 Y0.093333
+G1 X0.378333 Y0.095000
+G1 X0.381667 Y0.100000
+G1 X0.078333 Y0.405000
+G1 X0.073333 Y0.405000
+G0 Z#100
+(polygon end, distance 1.06)
+(polygon 2)
+G0 X0.081667 Y0.385000    (start point)
+G1 Z#101
+G1 X0.081667 Y0.105000
+G1 X0.361667 Y0.105000
+G1 X0.083333 Y0.385000
+G1 X0.081667 Y0.385000
+G0 Z#100
+(polygon end, distance 0.96)
+(end, total distance 51.22mm = 2.02in)
+M5 M9 M2
Index: ref/layer_spc.gcode/layer_spc.gcode.*.cnc
===================================================================
Index: ref/line_f_clear.gcode/line_f_clear.gcode.top.cnc
===================================================================
--- ref/line_f_clear.gcode/line_f_clear.gcode.top.cnc	(nonexistent)
+++ ref/line_f_clear.gcode/line_f_clear.gcode.top.cnc	(revision 27031)
@@ -0,0 +1,84 @@
+(Created by G-code exporter)
+(600 dpi)
+(Unit: inch)
+(Board size: 0.50x0.50 inches)#100=0.002000  (safe Z)
+#101=-0.000050  (cutting depth)
+(---------------------------------)
+G17 G20 G90 G64 P0.003 M3 S3000 M7 F1
+G0 Z#100
+(polygon 1)
+G0 X0.025000 Y0.475000    (start point)
+G1 Z#101
+G1 X0.025000 Y0.023333
+G1 X0.476667 Y0.023333
+G1 X0.476667 Y0.475000
+G1 X0.025000 Y0.475000
+G0 Z#100
+(polygon end, distance 1.81)
+(polygon 2)
+G0 X0.245000 Y0.421667    (start point)
+G1 Z#101
+G1 X0.235000 Y0.418333
+G1 X0.221667 Y0.411667
+G1 X0.213333 Y0.401667
+G1 X0.205000 Y0.385000
+G1 X0.205000 Y0.298333
+G1 X0.245000 Y0.260000
+G1 X0.245000 Y0.376667
+G1 X0.250000 Y0.380000
+G1 X0.255000 Y0.376667
+G1 X0.256667 Y0.263333
+G1 X0.258333 Y0.263333
+G1 X0.296667 Y0.275000
+G1 X0.295000 Y0.390000
+G1 X0.288333 Y0.403333
+G1 X0.276667 Y0.413333
+G1 X0.263333 Y0.420000
+G1 X0.245000 Y0.421667
+G0 Z#100
+(polygon end, distance 0.66)
+(polygon 3)
+G0 X0.205000 Y0.290000    (start point)
+G1 Z#101
+G1 X0.205000 Y0.270000
+G1 X0.123333 Y0.270000
+G1 X0.111667 Y0.261667
+G1 X0.106667 Y0.250000
+G1 X0.108333 Y0.241667
+G1 X0.120000 Y0.230000
+G1 X0.205000 Y0.230000
+G1 X0.205000 Y0.113333
+G1 X0.213333 Y0.096667
+G1 X0.221667 Y0.086667
+G1 X0.238333 Y0.078333
+G1 X0.263333 Y0.078333
+G1 X0.276667 Y0.085000
+G1 X0.288333 Y0.095000
+G1 X0.295000 Y0.108333
+G1 X0.296667 Y0.230000
+G1 X0.406667 Y0.230000
+G1 X0.420000 Y0.243333
+G1 X0.420000 Y0.253333
+G1 X0.413333 Y0.263333
+G1 X0.401667 Y0.270000
+G1 X0.346667 Y0.270000
+G1 X0.315000 Y0.258333
+G1 X0.403333 Y0.258333
+G1 X0.410000 Y0.251667
+G1 X0.410000 Y0.246667
+G1 X0.403333 Y0.240000
+G1 X0.256667 Y0.240000
+G1 X0.255000 Y0.121667
+G1 X0.250000 Y0.118333
+G1 X0.245000 Y0.121667
+G1 X0.245000 Y0.240000
+G1 X0.123333 Y0.240000
+G1 X0.116667 Y0.246667
+G1 X0.116667 Y0.251667
+G1 X0.121667 Y0.256667
+G1 X0.236667 Y0.260000
+G1 X0.205000 Y0.290000
+G0 Z#100
+(polygon end, distance 1.66)
+(end, total distance 104.86mm = 4.13in)
+M5 M9 M2
Index: ref/line_normal.gcode/line_normal.gcode.top.cnc
===================================================================
--- ref/line_normal.gcode/line_normal.gcode.top.cnc	(nonexistent)
+++ ref/line_normal.gcode/line_normal.gcode.top.cnc	(revision 27031)
@@ -0,0 +1,44 @@
+(Created by G-code exporter)
+(600 dpi)
+(Unit: inch)
+(Board size: 0.50x0.50 inches)#100=0.002000  (safe Z)
+#101=-0.000050  (cutting depth)
+(---------------------------------)
+G17 G20 G90 G64 P0.003 M3 S3000 M7 F1
+G0 Z#100
+(polygon 1)
+G0 X0.248333 Y0.380000    (start point)
+G1 Z#101
+G1 X0.245000 Y0.376667
+G1 X0.245000 Y0.260000
+G1 X0.150000 Y0.353333
+G1 X0.146667 Y0.350000
+G1 X0.236667 Y0.258333
+G1 X0.123333 Y0.258333
+G1 X0.116667 Y0.251667
+G1 X0.116667 Y0.246667
+G1 X0.123333 Y0.240000
+G1 X0.245000 Y0.240000
+G1 X0.245000 Y0.121667
+G1 X0.250000 Y0.118333
+G1 X0.255000 Y0.121667
+G1 X0.256667 Y0.240000
+G1 X0.403333 Y0.240000
+G1 X0.410000 Y0.246667
+G1 X0.410000 Y0.251667
+G1 X0.403333 Y0.258333
+G1 X0.315000 Y0.258333
+G1 X0.401667 Y0.288333
+G1 X0.410000 Y0.293333
+G1 X0.411667 Y0.300000
+G1 X0.406667 Y0.308333
+G1 X0.398333 Y0.310000
+G1 X0.260000 Y0.263333
+G1 X0.256667 Y0.263333
+G1 X0.256667 Y0.376667
+G1 X0.253333 Y0.380000
+G1 X0.248333 Y0.380000
+G0 Z#100
+(polygon end, distance 1.55)
+(end, total distance 39.45mm = 1.55in)
+M5 M9 M2
Index: ref/line_offpage.gcode/line_offpage.gcode.top.cnc
===================================================================
--- ref/line_offpage.gcode/line_offpage.gcode.top.cnc	(nonexistent)
+++ ref/line_offpage.gcode/line_offpage.gcode.top.cnc	(revision 27031)
@@ -0,0 +1,20 @@
+(Created by G-code exporter)
+(600 dpi)
+(Unit: inch)
+(Board size: 0.50x0.50 inches)#100=0.002000  (safe Z)
+#101=-0.000050  (cutting depth)
+(---------------------------------)
+G17 G20 G90 G64 P0.003 M3 S3000 M7 F1
+G0 Z#100
+(polygon 1)
+G0 X0.098333 Y0.305000    (start point)
+G1 Z#101
+G1 X0.095000 Y0.300000
+G1 X0.098333 Y0.295000
+G1 X0.500000 Y0.293333
+G1 X0.500000 Y0.305000
+G1 X0.098333 Y0.305000
+G0 Z#100
+(polygon end, distance 0.83)
+(end, total distance 21.01mm = 0.83in)
+M5 M9 M2
Index: ref/line_overlap1.gcode/line_overlap1.gcode.top.cnc
===================================================================
--- ref/line_overlap1.gcode/line_overlap1.gcode.top.cnc	(nonexistent)
+++ ref/line_overlap1.gcode/line_overlap1.gcode.top.cnc	(revision 27031)
@@ -0,0 +1,23 @@
+(Created by G-code exporter)
+(600 dpi)
+(Unit: inch)
+(Board size: 0.50x0.50 inches)#100=0.002000  (safe Z)
+#101=-0.000050  (cutting depth)
+(---------------------------------)
+G17 G20 G90 G64 P0.003 M3 S3000 M7 F1
+G0 Z#100
+(polygon 1)
+G0 X0.198333 Y0.308333    (start point)
+G1 Z#101
+G1 X0.191667 Y0.301667
+G1 X0.191667 Y0.296667
+G1 X0.198333 Y0.290000
+G1 X0.303333 Y0.290000
+G1 X0.310000 Y0.296667
+G1 X0.310000 Y0.301667
+G1 X0.303333 Y0.308333
+G1 X0.198333 Y0.308333
+G0 Z#100
+(polygon end, distance 0.26)
+(end, total distance 6.55mm = 0.26in)
+M5 M9 M2
Index: ref/line_overlap2.gcode/line_overlap2.gcode.top.cnc
===================================================================
--- ref/line_overlap2.gcode/line_overlap2.gcode.top.cnc	(nonexistent)
+++ ref/line_overlap2.gcode/line_overlap2.gcode.top.cnc	(revision 27031)
@@ -0,0 +1,23 @@
+(Created by G-code exporter)
+(600 dpi)
+(Unit: inch)
+(Board size: 0.50x0.50 inches)#100=0.002000  (safe Z)
+#101=-0.000050  (cutting depth)
+(---------------------------------)
+G17 G20 G90 G64 P0.003 M3 S3000 M7 F1
+G0 Z#100
+(polygon 1)
+G0 X0.198333 Y0.308333    (start point)
+G1 Z#101
+G1 X0.191667 Y0.301667
+G1 X0.191667 Y0.296667
+G1 X0.198333 Y0.290000
+G1 X0.353333 Y0.290000
+G1 X0.360000 Y0.296667
+G1 X0.360000 Y0.301667
+G1 X0.353333 Y0.308333
+G1 X0.198333 Y0.308333
+G0 Z#100
+(polygon end, distance 0.36)
+(end, total distance 9.09mm = 0.36in)
+M5 M9 M2
Index: ref/line_overlap3.gcode/line_overlap3.gcode.top.cnc
===================================================================
--- ref/line_overlap3.gcode/line_overlap3.gcode.top.cnc	(nonexistent)
+++ ref/line_overlap3.gcode/line_overlap3.gcode.top.cnc	(revision 27031)
@@ -0,0 +1,23 @@
+(Created by G-code exporter)
+(600 dpi)
+(Unit: inch)
+(Board size: 0.50x0.50 inches)#100=0.002000  (safe Z)
+#101=-0.000050  (cutting depth)
+(---------------------------------)
+G17 G20 G90 G64 P0.003 M3 S3000 M7 F1
+G0 Z#100
+(polygon 1)
+G0 X0.198333 Y0.308333    (start point)
+G1 Z#101
+G1 X0.191667 Y0.301667
+G1 X0.191667 Y0.296667
+G1 X0.198333 Y0.290000
+G1 X0.353333 Y0.290000
+G1 X0.360000 Y0.296667
+G1 X0.360000 Y0.301667
+G1 X0.353333 Y0.308333
+G1 X0.198333 Y0.308333
+G0 Z#100
+(polygon end, distance 0.36)
+(end, total distance 9.09mm = 0.36in)
+M5 M9 M2
Index: ref/line_overlap4.gcode/line_overlap4.gcode.top.cnc
===================================================================
--- ref/line_overlap4.gcode/line_overlap4.gcode.top.cnc	(nonexistent)
+++ ref/line_overlap4.gcode/line_overlap4.gcode.top.cnc	(revision 27031)
@@ -0,0 +1,40 @@
+(Created by G-code exporter)
+(600 dpi)
+(Unit: inch)
+(Board size: 0.50x0.50 inches)#100=0.002000  (safe Z)
+#101=-0.000050  (cutting depth)
+(---------------------------------)
+G17 G20 G90 G64 P0.003 M3 S3000 M7 F1
+G0 Z#100
+(polygon 1)
+G0 X0.150000 Y0.350000    (start point)
+G1 Z#101
+G1 X0.150000 Y0.173333
+G1 X0.301667 Y0.173333
+G1 X0.301667 Y0.278333
+G1 X0.193333 Y0.278333
+G1 X0.185000 Y0.281667
+G1 X0.180000 Y0.295000
+G1 X0.180000 Y0.303333
+G1 X0.185000 Y0.316667
+G1 X0.196667 Y0.321667
+G1 X0.301667 Y0.321667
+G1 X0.301667 Y0.350000
+G1 X0.150000 Y0.350000
+G0 Z#100
+(polygon end, distance 0.89)
+(polygon 2)
+G0 X0.198333 Y0.308333    (start point)
+G1 Z#101
+G1 X0.191667 Y0.301667
+G1 X0.191667 Y0.296667
+G1 X0.198333 Y0.290000
+G1 X0.353333 Y0.290000
+G1 X0.360000 Y0.296667
+G1 X0.360000 Y0.301667
+G1 X0.353333 Y0.308333
+G1 X0.198333 Y0.308333
+G0 Z#100
+(polygon end, distance 0.36)
+(end, total distance 31.57mm = 1.24in)
+M5 M9 M2
Index: ref/line_zerolen.gcode/line_zerolen.gcode.top.cnc
===================================================================
--- ref/line_zerolen.gcode/line_zerolen.gcode.top.cnc	(nonexistent)
+++ ref/line_zerolen.gcode/line_zerolen.gcode.top.cnc	(revision 27031)
@@ -0,0 +1,19 @@
+(Created by G-code exporter)
+(600 dpi)
+(Unit: inch)
+(Board size: 0.50x0.50 inches)#100=0.002000  (safe Z)
+#101=-0.000050  (cutting depth)
+(---------------------------------)
+G17 G20 G90 G64 P0.003 M3 S3000 M7 F1
+G0 Z#100
+(polygon 1)
+G0 X0.191667 Y0.308333    (start point)
+G1 Z#101
+G1 X0.191667 Y0.290000
+G1 X0.210000 Y0.290000
+G1 X0.210000 Y0.308333
+G1 X0.191667 Y0.308333
+G0 Z#100
+(polygon end, distance 0.07)
+(end, total distance 1.86mm = 0.07in)
+M5 M9 M2
Index: ref/mech.gcode/mech.gcode.bottom.cnc
===================================================================
--- ref/mech.gcode/mech.gcode.bottom.cnc	(nonexistent)
+++ ref/mech.gcode/mech.gcode.bottom.cnc	(revision 27031)
@@ -0,0 +1,90 @@
+(Created by G-code exporter)
+(600 dpi)
+(Unit: inch)
+(Board size: 0.50x0.50 inches)#100=0.002000  (safe Z)
+#101=-0.000050  (cutting depth)
+(---------------------------------)
+G17 G20 G90 G64 P0.003 M3 S3000 M7 F1
+G0 Z#100
+(polygon 1)
+G0 X0.263333 Y0.470000    (start point)
+G1 Z#101
+G1 X0.263333 Y0.428333
+G1 X0.295000 Y0.428333
+G1 X0.295000 Y0.470000
+G1 X0.263333 Y0.470000
+G0 Z#100
+(polygon end, distance 0.15)
+(polygon 2)
+G0 X0.343333 Y0.470000    (start point)
+G1 Z#101
+G1 X0.343333 Y0.428333
+G1 X0.375000 Y0.428333
+G1 X0.375000 Y0.470000
+G1 X0.343333 Y0.470000
+G0 Z#100
+(polygon end, distance 0.15)
+(polygon 3)
+G0 X0.276667 Y0.410000    (start point)
+G1 Z#101
+G1 X0.268333 Y0.401667
+G1 X0.268333 Y0.376667
+G1 X0.276667 Y0.368333
+G1 X0.281667 Y0.368333
+G1 X0.290000 Y0.376667
+G1 X0.290000 Y0.401667
+G1 X0.281667 Y0.410000
+G1 X0.276667 Y0.410000
+G0 Z#100
+(polygon end, distance 0.11)
+(polygon 4)
+G0 X0.356667 Y0.410000    (start point)
+G1 Z#101
+G1 X0.348333 Y0.401667
+G1 X0.348333 Y0.376667
+G1 X0.356667 Y0.368333
+G1 X0.361667 Y0.368333
+G1 X0.370000 Y0.376667
+G1 X0.370000 Y0.401667
+G1 X0.361667 Y0.410000
+G1 X0.356667 Y0.410000
+G0 Z#100
+(polygon end, distance 0.11)
+(polygon 5)
+G0 X0.248333 Y0.340000    (start point)
+G1 Z#101
+G1 X0.248333 Y0.298333
+G1 X0.300000 Y0.298333
+G1 X0.300000 Y0.340000
+G1 X0.248333 Y0.340000
+G0 Z#100
+(polygon end, distance 0.19)
+(polygon 6)
+G0 X0.328333 Y0.340000    (start point)
+G1 Z#101
+G1 X0.328333 Y0.298333
+G1 X0.380000 Y0.298333
+G1 X0.380000 Y0.340000
+G1 X0.328333 Y0.340000
+G0 Z#100
+(polygon end, distance 0.19)
+(polygon 7)
+G0 X0.253333 Y0.190000    (start point)
+G1 Z#101
+G1 X0.253333 Y0.148333
+G1 X0.285000 Y0.148333
+G1 X0.285000 Y0.190000
+G1 X0.253333 Y0.190000
+G0 Z#100
+(polygon end, distance 0.15)
+(polygon 8)
+G0 X0.333333 Y0.190000    (start point)
+G1 Z#101
+G1 X0.333333 Y0.148333
+G1 X0.365000 Y0.148333
+G1 X0.365000 Y0.190000
+G1 X0.333333 Y0.190000
+G0 Z#100
+(polygon end, distance 0.15)
+(end, total distance 29.83mm = 1.17in)
+M5 M9 M2
Index: ref/mech.gcode/mech.gcode.drill.cnc
===================================================================
--- ref/mech.gcode/mech.gcode.drill.cnc	(nonexistent)
+++ ref/mech.gcode/mech.gcode.drill.cnc	(revision 27031)
@@ -0,0 +1,11 @@
+(Created by G-code exporter)
+(drill file: 2 drills)
+(Unit: inch)
+(Board size: 0.50x0.50 inches)#100=0.002000  (safe Z)
+#101=-0.002000  (drill depth)
+(---------------------------------)
+G17 G20 G90 G64 P0.003 M3 S3000 M7 F1
+G81 X0.280000 Y0.390000 Z#101 R#100
+G81 X0.360000 Y0.390000 Z#101 R#100
+M5 M9 M2
+(end, total distance 2.03mm = 0.08in)
Index: ref/mech.gcode/mech.gcode.group-1.cnc
===================================================================
--- ref/mech.gcode/mech.gcode.group-1.cnc	(nonexistent)
+++ ref/mech.gcode/mech.gcode.group-1.cnc	(revision 27031)
@@ -0,0 +1,54 @@
+(Created by G-code exporter)
+(600 dpi)
+(Unit: inch)
+(Board size: 0.50x0.50 inches)#100=0.002000  (safe Z)
+#101=-0.000050  (cutting depth)
+(---------------------------------)
+G17 G20 G90 G64 P0.003 M3 S3000 M7 F1
+G0 Z#100
+(polygon 1)
+G0 X0.213333 Y0.455000    (start point)
+G1 Z#101
+G1 X0.210000 Y0.450000
+G1 X0.213333 Y0.445000
+G1 X0.228333 Y0.445000
+G1 X0.231667 Y0.450000
+G1 X0.228333 Y0.455000
+G1 X0.213333 Y0.455000
+G0 Z#100
+(polygon end, distance 0.05)
+(polygon 2)
+G0 X0.138333 Y0.395000    (start point)
+G1 Z#101
+G1 X0.135000 Y0.390000
+G1 X0.136667 Y0.385000
+G1 X0.141667 Y0.383333
+G1 X0.146667 Y0.388333
+G1 X0.143333 Y0.393333
+G1 X0.138333 Y0.395000
+G0 Z#100
+(polygon end, distance 0.03)
+(polygon 3)
+G0 X0.218333 Y0.395000    (start point)
+G1 Z#101
+G1 X0.215000 Y0.390000
+G1 X0.216667 Y0.385000
+G1 X0.221667 Y0.383333
+G1 X0.226667 Y0.388333
+G1 X0.223333 Y0.393333
+G1 X0.218333 Y0.395000
+G0 Z#100
+(polygon end, distance 0.03)
+(polygon 4)
+G0 X0.208333 Y0.325000    (start point)
+G1 Z#101
+G1 X0.205000 Y0.320000
+G1 X0.208333 Y0.315000
+G1 X0.243333 Y0.315000
+G1 X0.246667 Y0.320000
+G1 X0.243333 Y0.325000
+G1 X0.208333 Y0.325000
+G0 Z#100
+(polygon end, distance 0.09)
+(end, total distance 5.53mm = 0.22in)
+M5 M9 M2
Index: ref/mech.gcode/mech.gcode.top.cnc
===================================================================
--- ref/mech.gcode/mech.gcode.top.cnc	(nonexistent)
+++ ref/mech.gcode/mech.gcode.top.cnc	(revision 27031)
@@ -0,0 +1,90 @@
+(Created by G-code exporter)
+(600 dpi)
+(Unit: inch)
+(Board size: 0.50x0.50 inches)#100=0.002000  (safe Z)
+#101=-0.000050  (cutting depth)
+(---------------------------------)
+G17 G20 G90 G64 P0.003 M3 S3000 M7 F1
+G0 Z#100
+(polygon 1)
+G0 X0.125000 Y0.460000    (start point)
+G1 Z#101
+G1 X0.125000 Y0.438333
+G1 X0.166667 Y0.438333
+G1 X0.166667 Y0.460000
+G1 X0.125000 Y0.460000
+G0 Z#100
+(polygon end, distance 0.13)
+(polygon 2)
+G0 X0.205000 Y0.460000    (start point)
+G1 Z#101
+G1 X0.205000 Y0.438333
+G1 X0.246667 Y0.438333
+G1 X0.246667 Y0.460000
+G1 X0.205000 Y0.460000
+G0 Z#100
+(polygon end, distance 0.13)
+(polygon 3)
+G0 X0.128333 Y0.400000    (start point)
+G1 Z#101
+G1 X0.120000 Y0.391667
+G1 X0.120000 Y0.386667
+G1 X0.128333 Y0.378333
+G1 X0.153333 Y0.378333
+G1 X0.161667 Y0.386667
+G1 X0.161667 Y0.391667
+G1 X0.153333 Y0.400000
+G1 X0.128333 Y0.400000
+G0 Z#100
+(polygon end, distance 0.11)
+(polygon 4)
+G0 X0.208333 Y0.400000    (start point)
+G1 Z#101
+G1 X0.200000 Y0.391667
+G1 X0.200000 Y0.386667
+G1 X0.208333 Y0.378333
+G1 X0.233333 Y0.378333
+G1 X0.241667 Y0.386667
+G1 X0.241667 Y0.391667
+G1 X0.233333 Y0.400000
+G1 X0.208333 Y0.400000
+G0 Z#100
+(polygon end, distance 0.11)
+(polygon 5)
+G0 X0.120000 Y0.340000    (start point)
+G1 Z#101
+G1 X0.120000 Y0.298333
+G1 X0.171667 Y0.298333
+G1 X0.171667 Y0.340000
+G1 X0.120000 Y0.340000
+G0 Z#100
+(polygon end, distance 0.19)
+(polygon 6)
+G0 X0.200000 Y0.340000    (start point)
+G1 Z#101
+G1 X0.200000 Y0.298333
+G1 X0.251667 Y0.298333
+G1 X0.251667 Y0.340000
+G1 X0.200000 Y0.340000
+G0 Z#100
+(polygon end, distance 0.19)
+(polygon 7)
+G0 X0.135000 Y0.180000    (start point)
+G1 Z#101
+G1 X0.135000 Y0.158333
+G1 X0.176667 Y0.158333
+G1 X0.176667 Y0.180000
+G1 X0.135000 Y0.180000
+G0 Z#100
+(polygon end, distance 0.13)
+(polygon 8)
+G0 X0.215000 Y0.180000    (start point)
+G1 Z#101
+G1 X0.215000 Y0.158333
+G1 X0.256667 Y0.158333
+G1 X0.256667 Y0.180000
+G1 X0.215000 Y0.180000
+G0 Z#100
+(polygon end, distance 0.13)
+(end, total distance 27.79mm = 1.09in)
+M5 M9 M2
Index: ref/netlist.gcode/netlist.gcode.bottom.cnc
===================================================================
--- ref/netlist.gcode/netlist.gcode.bottom.cnc	(nonexistent)
+++ ref/netlist.gcode/netlist.gcode.bottom.cnc	(revision 27031)
@@ -0,0 +1,82 @@
+(Created by G-code exporter)
+(600 dpi)
+(Unit: inch)
+(Board size: 0.50x0.50 inches)#100=0.002000  (safe Z)
+#101=-0.000050  (cutting depth)
+(---------------------------------)
+G17 G20 G90 G64 P0.003 M3 S3000 M7 F1
+G0 Z#100
+(polygon 1)
+G0 X0.091667 Y0.365000    (start point)
+G1 Z#101
+G1 X0.081667 Y0.361667
+G1 X0.061667 Y0.341667
+G1 X0.058333 Y0.328333
+G1 X0.058333 Y0.320000
+G1 X0.061667 Y0.306667
+G1 X0.081667 Y0.286667
+G1 X0.095000 Y0.283333
+G1 X0.103333 Y0.283333
+G1 X0.116667 Y0.286667
+G1 X0.136667 Y0.306667
+G1 X0.140000 Y0.320000
+G1 X0.140000 Y0.328333
+G1 X0.136667 Y0.341667
+G1 X0.116667 Y0.361667
+G1 X0.103333 Y0.365000
+G1 X0.091667 Y0.365000
+G0 Z#100
+(polygon end, distance 0.26)
+(polygon 2)
+G0 X0.358333 Y0.365000    (start point)
+G1 Z#101
+G1 X0.358333 Y0.283333
+G1 X0.440000 Y0.283333
+G1 X0.440000 Y0.365000
+G1 X0.358333 Y0.365000
+G0 Z#100
+(polygon end, distance 0.33)
+(polygon 3)
+G0 X0.091667 Y0.265000    (start point)
+G1 Z#101
+G1 X0.081667 Y0.261667
+G1 X0.061667 Y0.241667
+G1 X0.058333 Y0.228333
+G1 X0.058333 Y0.220000
+G1 X0.061667 Y0.206667
+G1 X0.081667 Y0.186667
+G1 X0.095000 Y0.183333
+G1 X0.103333 Y0.183333
+G1 X0.116667 Y0.186667
+G1 X0.136667 Y0.206667
+G1 X0.140000 Y0.220000
+G1 X0.140000 Y0.228333
+G1 X0.136667 Y0.241667
+G1 X0.116667 Y0.261667
+G1 X0.103333 Y0.265000
+G1 X0.091667 Y0.265000
+G0 Z#100
+(polygon end, distance 0.26)
+(polygon 4)
+G0 X0.391667 Y0.265000    (start point)
+G1 Z#101
+G1 X0.381667 Y0.261667
+G1 X0.361667 Y0.241667
+G1 X0.358333 Y0.228333
+G1 X0.358333 Y0.220000
+G1 X0.361667 Y0.206667
+G1 X0.381667 Y0.186667
+G1 X0.395000 Y0.183333
+G1 X0.403333 Y0.183333
+G1 X0.416667 Y0.186667
+G1 X0.436667 Y0.206667
+G1 X0.440000 Y0.220000
+G1 X0.440000 Y0.228333
+G1 X0.436667 Y0.241667
+G1 X0.416667 Y0.261667
+G1 X0.403333 Y0.265000
+G1 X0.391667 Y0.265000
+G0 Z#100
+(polygon end, distance 0.26)
+(end, total distance 27.85mm = 1.10in)
+M5 M9 M2
Index: ref/netlist.gcode/netlist.gcode.drill.cnc
===================================================================
--- ref/netlist.gcode/netlist.gcode.drill.cnc	(nonexistent)
+++ ref/netlist.gcode/netlist.gcode.drill.cnc	(revision 27031)
@@ -0,0 +1,13 @@
+(Created by G-code exporter)
+(drill file: 4 drills)
+(Unit: inch)
+(Board size: 0.50x0.50 inches)#100=0.002000  (safe Z)
+#101=-0.002000  (drill depth)
+(---------------------------------)
+G17 G20 G90 G64 P0.003 M3 S3000 M7 F1
+G81 X0.100000 Y0.225000 Z#101 R#100
+G81 X0.100000 Y0.325000 Z#101 R#100
+G81 X0.400000 Y0.325000 Z#101 R#100
+G81 X0.400000 Y0.225000 Z#101 R#100
+M5 M9 M2
+(end, total distance 12.70mm = 0.50in)
Index: ref/netlist.gcode/netlist.gcode.group-1.cnc
===================================================================
--- ref/netlist.gcode/netlist.gcode.group-1.cnc	(nonexistent)
+++ ref/netlist.gcode/netlist.gcode.group-1.cnc	(revision 27031)
@@ -0,0 +1,82 @@
+(Created by G-code exporter)
+(600 dpi)
+(Unit: inch)
+(Board size: 0.50x0.50 inches)#100=0.002000  (safe Z)
+#101=-0.000050  (cutting depth)
+(---------------------------------)
+G17 G20 G90 G64 P0.003 M3 S3000 M7 F1
+G0 Z#100
+(polygon 1)
+G0 X0.060000 Y0.365000    (start point)
+G1 Z#101
+G1 X0.060000 Y0.283333
+G1 X0.141667 Y0.283333
+G1 X0.141667 Y0.365000
+G1 X0.060000 Y0.365000
+G0 Z#100
+(polygon end, distance 0.33)
+(polygon 2)
+G0 X0.393333 Y0.365000    (start point)
+G1 Z#101
+G1 X0.383333 Y0.361667
+G1 X0.363333 Y0.341667
+G1 X0.360000 Y0.328333
+G1 X0.360000 Y0.320000
+G1 X0.363333 Y0.306667
+G1 X0.383333 Y0.286667
+G1 X0.396667 Y0.283333
+G1 X0.405000 Y0.283333
+G1 X0.418333 Y0.286667
+G1 X0.438333 Y0.306667
+G1 X0.441667 Y0.320000
+G1 X0.441667 Y0.328333
+G1 X0.438333 Y0.341667
+G1 X0.418333 Y0.361667
+G1 X0.405000 Y0.365000
+G1 X0.393333 Y0.365000
+G0 Z#100
+(polygon end, distance 0.26)
+(polygon 3)
+G0 X0.093333 Y0.265000    (start point)
+G1 Z#101
+G1 X0.083333 Y0.261667
+G1 X0.063333 Y0.241667
+G1 X0.060000 Y0.228333
+G1 X0.060000 Y0.220000
+G1 X0.063333 Y0.206667
+G1 X0.083333 Y0.186667
+G1 X0.096667 Y0.183333
+G1 X0.105000 Y0.183333
+G1 X0.118333 Y0.186667
+G1 X0.138333 Y0.206667
+G1 X0.141667 Y0.220000
+G1 X0.141667 Y0.228333
+G1 X0.138333 Y0.241667
+G1 X0.118333 Y0.261667
+G1 X0.105000 Y0.265000
+G1 X0.093333 Y0.265000
+G0 Z#100
+(polygon end, distance 0.26)
+(polygon 4)
+G0 X0.393333 Y0.265000    (start point)
+G1 Z#101
+G1 X0.383333 Y0.261667
+G1 X0.363333 Y0.241667
+G1 X0.360000 Y0.228333
+G1 X0.360000 Y0.220000
+G1 X0.363333 Y0.206667
+G1 X0.383333 Y0.186667
+G1 X0.396667 Y0.183333
+G1 X0.405000 Y0.183333
+G1 X0.418333 Y0.186667
+G1 X0.438333 Y0.206667
+G1 X0.441667 Y0.220000
+G1 X0.441667 Y0.228333
+G1 X0.438333 Y0.241667
+G1 X0.418333 Y0.261667
+G1 X0.405000 Y0.265000
+G1 X0.393333 Y0.265000
+G0 Z#100
+(polygon end, distance 0.26)
+(end, total distance 27.85mm = 1.10in)
+M5 M9 M2
Index: ref/netlist.gcode/netlist.gcode.top.cnc
===================================================================
--- ref/netlist.gcode/netlist.gcode.top.cnc	(nonexistent)
+++ ref/netlist.gcode/netlist.gcode.top.cnc	(revision 27031)
@@ -0,0 +1,82 @@
+(Created by G-code exporter)
+(600 dpi)
+(Unit: inch)
+(Board size: 0.50x0.50 inches)#100=0.002000  (safe Z)
+#101=-0.000050  (cutting depth)
+(---------------------------------)
+G17 G20 G90 G64 P0.003 M3 S3000 M7 F1
+G0 Z#100
+(polygon 1)
+G0 X0.060000 Y0.365000    (start point)
+G1 Z#101
+G1 X0.060000 Y0.283333
+G1 X0.141667 Y0.283333
+G1 X0.141667 Y0.365000
+G1 X0.060000 Y0.365000
+G0 Z#100
+(polygon end, distance 0.33)
+(polygon 2)
+G0 X0.393333 Y0.365000    (start point)
+G1 Z#101
+G1 X0.383333 Y0.361667
+G1 X0.363333 Y0.341667
+G1 X0.360000 Y0.328333
+G1 X0.360000 Y0.320000
+G1 X0.363333 Y0.306667
+G1 X0.383333 Y0.286667
+G1 X0.396667 Y0.283333
+G1 X0.405000 Y0.283333
+G1 X0.418333 Y0.286667
+G1 X0.438333 Y0.306667
+G1 X0.441667 Y0.320000
+G1 X0.441667 Y0.328333
+G1 X0.438333 Y0.341667
+G1 X0.418333 Y0.361667
+G1 X0.405000 Y0.365000
+G1 X0.393333 Y0.365000
+G0 Z#100
+(polygon end, distance 0.26)
+(polygon 3)
+G0 X0.093333 Y0.265000    (start point)
+G1 Z#101
+G1 X0.083333 Y0.261667
+G1 X0.063333 Y0.241667
+G1 X0.060000 Y0.228333
+G1 X0.060000 Y0.220000
+G1 X0.063333 Y0.206667
+G1 X0.083333 Y0.186667
+G1 X0.096667 Y0.183333
+G1 X0.105000 Y0.183333
+G1 X0.118333 Y0.186667
+G1 X0.138333 Y0.206667
+G1 X0.141667 Y0.220000
+G1 X0.141667 Y0.228333
+G1 X0.138333 Y0.241667
+G1 X0.118333 Y0.261667
+G1 X0.105000 Y0.265000
+G1 X0.093333 Y0.265000
+G0 Z#100
+(polygon end, distance 0.26)
+(polygon 4)
+G0 X0.393333 Y0.265000    (start point)
+G1 Z#101
+G1 X0.383333 Y0.261667
+G1 X0.363333 Y0.241667
+G1 X0.360000 Y0.228333
+G1 X0.360000 Y0.220000
+G1 X0.363333 Y0.206667
+G1 X0.383333 Y0.186667
+G1 X0.396667 Y0.183333
+G1 X0.405000 Y0.183333
+G1 X0.418333 Y0.186667
+G1 X0.438333 Y0.206667
+G1 X0.441667 Y0.220000
+G1 X0.441667 Y0.228333
+G1 X0.438333 Y0.241667
+G1 X0.418333 Y0.261667
+G1 X0.405000 Y0.265000
+G1 X0.393333 Y0.265000
+G0 Z#100
+(polygon end, distance 0.26)
+(end, total distance 27.85mm = 1.10in)
+M5 M9 M2
Index: ref/netlist_ba.gcode/netlist_ba.gcode.bottom.cnc
===================================================================
--- ref/netlist_ba.gcode/netlist_ba.gcode.bottom.cnc	(nonexistent)
+++ ref/netlist_ba.gcode/netlist_ba.gcode.bottom.cnc	(revision 27031)
@@ -0,0 +1,82 @@
+(Created by G-code exporter)
+(600 dpi)
+(Unit: inch)
+(Board size: 0.50x0.50 inches)#100=0.002000  (safe Z)
+#101=-0.000050  (cutting depth)
+(---------------------------------)
+G17 G20 G90 G64 P0.003 M3 S3000 M7 F1
+G0 Z#100
+(polygon 1)
+G0 X0.091667 Y0.365000    (start point)
+G1 Z#101
+G1 X0.081667 Y0.361667
+G1 X0.061667 Y0.341667
+G1 X0.058333 Y0.328333
+G1 X0.058333 Y0.320000
+G1 X0.061667 Y0.306667
+G1 X0.081667 Y0.286667
+G1 X0.095000 Y0.283333
+G1 X0.103333 Y0.283333
+G1 X0.116667 Y0.286667
+G1 X0.136667 Y0.306667
+G1 X0.140000 Y0.320000
+G1 X0.140000 Y0.328333
+G1 X0.136667 Y0.341667
+G1 X0.116667 Y0.361667
+G1 X0.103333 Y0.365000
+G1 X0.091667 Y0.365000
+G0 Z#100
+(polygon end, distance 0.26)
+(polygon 2)
+G0 X0.358333 Y0.365000    (start point)
+G1 Z#101
+G1 X0.358333 Y0.283333
+G1 X0.440000 Y0.283333
+G1 X0.440000 Y0.365000
+G1 X0.358333 Y0.365000
+G0 Z#100
+(polygon end, distance 0.33)
+(polygon 3)
+G0 X0.091667 Y0.265000    (start point)
+G1 Z#101
+G1 X0.081667 Y0.261667
+G1 X0.061667 Y0.241667
+G1 X0.058333 Y0.228333
+G1 X0.058333 Y0.220000
+G1 X0.061667 Y0.206667
+G1 X0.081667 Y0.186667
+G1 X0.095000 Y0.183333
+G1 X0.103333 Y0.183333
+G1 X0.116667 Y0.186667
+G1 X0.136667 Y0.206667
+G1 X0.140000 Y0.220000
+G1 X0.140000 Y0.228333
+G1 X0.136667 Y0.241667
+G1 X0.116667 Y0.261667
+G1 X0.103333 Y0.265000
+G1 X0.091667 Y0.265000
+G0 Z#100
+(polygon end, distance 0.26)
+(polygon 4)
+G0 X0.391667 Y0.265000    (start point)
+G1 Z#101
+G1 X0.381667 Y0.261667
+G1 X0.361667 Y0.241667
+G1 X0.358333 Y0.228333
+G1 X0.358333 Y0.220000
+G1 X0.361667 Y0.206667
+G1 X0.381667 Y0.186667
+G1 X0.395000 Y0.183333
+G1 X0.403333 Y0.183333
+G1 X0.416667 Y0.186667
+G1 X0.436667 Y0.206667
+G1 X0.440000 Y0.220000
+G1 X0.440000 Y0.228333
+G1 X0.436667 Y0.241667
+G1 X0.416667 Y0.261667
+G1 X0.403333 Y0.265000
+G1 X0.391667 Y0.265000
+G0 Z#100
+(polygon end, distance 0.26)
+(end, total distance 27.85mm = 1.10in)
+M5 M9 M2
Index: ref/netlist_ba.gcode/netlist_ba.gcode.drill.cnc
===================================================================
--- ref/netlist_ba.gcode/netlist_ba.gcode.drill.cnc	(nonexistent)
+++ ref/netlist_ba.gcode/netlist_ba.gcode.drill.cnc	(revision 27031)
@@ -0,0 +1,13 @@
+(Created by G-code exporter)
+(drill file: 4 drills)
+(Unit: inch)
+(Board size: 0.50x0.50 inches)#100=0.002000  (safe Z)
+#101=-0.002000  (drill depth)
+(---------------------------------)
+G17 G20 G90 G64 P0.003 M3 S3000 M7 F1
+G81 X0.100000 Y0.225000 Z#101 R#100
+G81 X0.100000 Y0.325000 Z#101 R#100
+G81 X0.400000 Y0.325000 Z#101 R#100
+G81 X0.400000 Y0.225000 Z#101 R#100
+M5 M9 M2
+(end, total distance 12.70mm = 0.50in)
Index: ref/netlist_ba.gcode/netlist_ba.gcode.group-1.cnc
===================================================================
--- ref/netlist_ba.gcode/netlist_ba.gcode.group-1.cnc	(nonexistent)
+++ ref/netlist_ba.gcode/netlist_ba.gcode.group-1.cnc	(revision 27031)
@@ -0,0 +1,82 @@
+(Created by G-code exporter)
+(600 dpi)
+(Unit: inch)
+(Board size: 0.50x0.50 inches)#100=0.002000  (safe Z)
+#101=-0.000050  (cutting depth)
+(---------------------------------)
+G17 G20 G90 G64 P0.003 M3 S3000 M7 F1
+G0 Z#100
+(polygon 1)
+G0 X0.060000 Y0.365000    (start point)
+G1 Z#101
+G1 X0.060000 Y0.283333
+G1 X0.141667 Y0.283333
+G1 X0.141667 Y0.365000
+G1 X0.060000 Y0.365000
+G0 Z#100
+(polygon end, distance 0.33)
+(polygon 2)
+G0 X0.393333 Y0.365000    (start point)
+G1 Z#101
+G1 X0.383333 Y0.361667
+G1 X0.363333 Y0.341667
+G1 X0.360000 Y0.328333
+G1 X0.360000 Y0.320000
+G1 X0.363333 Y0.306667
+G1 X0.383333 Y0.286667
+G1 X0.396667 Y0.283333
+G1 X0.405000 Y0.283333
+G1 X0.418333 Y0.286667
+G1 X0.438333 Y0.306667
+G1 X0.441667 Y0.320000
+G1 X0.441667 Y0.328333
+G1 X0.438333 Y0.341667
+G1 X0.418333 Y0.361667
+G1 X0.405000 Y0.365000
+G1 X0.393333 Y0.365000
+G0 Z#100
+(polygon end, distance 0.26)
+(polygon 3)
+G0 X0.093333 Y0.265000    (start point)
+G1 Z#101
+G1 X0.083333 Y0.261667
+G1 X0.063333 Y0.241667
+G1 X0.060000 Y0.228333
+G1 X0.060000 Y0.220000
+G1 X0.063333 Y0.206667
+G1 X0.083333 Y0.186667
+G1 X0.096667 Y0.183333
+G1 X0.105000 Y0.183333
+G1 X0.118333 Y0.186667
+G1 X0.138333 Y0.206667
+G1 X0.141667 Y0.220000
+G1 X0.141667 Y0.228333
+G1 X0.138333 Y0.241667
+G1 X0.118333 Y0.261667
+G1 X0.105000 Y0.265000
+G1 X0.093333 Y0.265000
+G0 Z#100
+(polygon end, distance 0.26)
+(polygon 4)
+G0 X0.393333 Y0.265000    (start point)
+G1 Z#101
+G1 X0.383333 Y0.261667
+G1 X0.363333 Y0.241667
+G1 X0.360000 Y0.228333
+G1 X0.360000 Y0.220000
+G1 X0.363333 Y0.206667
+G1 X0.383333 Y0.186667
+G1 X0.396667 Y0.183333
+G1 X0.405000 Y0.183333
+G1 X0.418333 Y0.186667
+G1 X0.438333 Y0.206667
+G1 X0.441667 Y0.220000
+G1 X0.441667 Y0.228333
+G1 X0.438333 Y0.241667
+G1 X0.418333 Y0.261667
+G1 X0.405000 Y0.265000
+G1 X0.393333 Y0.265000
+G0 Z#100
+(polygon end, distance 0.26)
+(end, total distance 27.85mm = 1.10in)
+M5 M9 M2
Index: ref/netlist_ba.gcode/netlist_ba.gcode.top.cnc
===================================================================
--- ref/netlist_ba.gcode/netlist_ba.gcode.top.cnc	(nonexistent)
+++ ref/netlist_ba.gcode/netlist_ba.gcode.top.cnc	(revision 27031)
@@ -0,0 +1,82 @@
+(Created by G-code exporter)
+(600 dpi)
+(Unit: inch)
+(Board size: 0.50x0.50 inches)#100=0.002000  (safe Z)
+#101=-0.000050  (cutting depth)
+(---------------------------------)
+G17 G20 G90 G64 P0.003 M3 S3000 M7 F1
+G0 Z#100
+(polygon 1)
+G0 X0.060000 Y0.365000    (start point)
+G1 Z#101
+G1 X0.060000 Y0.283333
+G1 X0.141667 Y0.283333
+G1 X0.141667 Y0.365000
+G1 X0.060000 Y0.365000
+G0 Z#100
+(polygon end, distance 0.33)
+(polygon 2)
+G0 X0.393333 Y0.365000    (start point)
+G1 Z#101
+G1 X0.383333 Y0.361667
+G1 X0.363333 Y0.341667
+G1 X0.360000 Y0.328333
+G1 X0.360000 Y0.320000
+G1 X0.363333 Y0.306667
+G1 X0.383333 Y0.286667
+G1 X0.396667 Y0.283333
+G1 X0.405000 Y0.283333
+G1 X0.418333 Y0.286667
+G1 X0.438333 Y0.306667
+G1 X0.441667 Y0.320000
+G1 X0.441667 Y0.328333
+G1 X0.438333 Y0.341667
+G1 X0.418333 Y0.361667
+G1 X0.405000 Y0.365000
+G1 X0.393333 Y0.365000
+G0 Z#100
+(polygon end, distance 0.26)
+(polygon 3)
+G0 X0.093333 Y0.265000    (start point)
+G1 Z#101
+G1 X0.083333 Y0.261667
+G1 X0.063333 Y0.241667
+G1 X0.060000 Y0.228333
+G1 X0.060000 Y0.220000
+G1 X0.063333 Y0.206667
+G1 X0.083333 Y0.186667
+G1 X0.096667 Y0.183333
+G1 X0.105000 Y0.183333
+G1 X0.118333 Y0.186667
+G1 X0.138333 Y0.206667
+G1 X0.141667 Y0.220000
+G1 X0.141667 Y0.228333
+G1 X0.138333 Y0.241667
+G1 X0.118333 Y0.261667
+G1 X0.105000 Y0.265000
+G1 X0.093333 Y0.265000
+G0 Z#100
+(polygon end, distance 0.26)
+(polygon 4)
+G0 X0.393333 Y0.265000    (start point)
+G1 Z#101
+G1 X0.383333 Y0.261667
+G1 X0.363333 Y0.241667
+G1 X0.360000 Y0.228333
+G1 X0.360000 Y0.220000
+G1 X0.363333 Y0.206667
+G1 X0.383333 Y0.186667
+G1 X0.396667 Y0.183333
+G1 X0.405000 Y0.183333
+G1 X0.418333 Y0.186667
+G1 X0.438333 Y0.206667
+G1 X0.441667 Y0.220000
+G1 X0.441667 Y0.228333
+G1 X0.438333 Y0.241667
+G1 X0.418333 Y0.261667
+G1 X0.405000 Y0.265000
+G1 X0.393333 Y0.265000
+G0 Z#100
+(polygon end, distance 0.26)
+(end, total distance 27.85mm = 1.10in)
+M5 M9 M2
Index: ref/padrot.gcode/padrot.gcode.top.cnc
===================================================================
--- ref/padrot.gcode/padrot.gcode.top.cnc	(nonexistent)
+++ ref/padrot.gcode/padrot.gcode.top.cnc	(revision 27031)
@@ -0,0 +1,97 @@
+(Created by G-code exporter)
+(600 dpi)
+(Unit: inch)
+(Board size: 0.50x0.50 inches)#100=0.002000  (safe Z)
+#101=-0.000050  (cutting depth)
+(---------------------------------)
+G17 G20 G90 G64 P0.003 M3 S3000 M7 F1
+G0 Z#100
+(polygon 1)
+G0 X0.048333 Y0.455000    (start point)
+G1 Z#101
+G1 X0.045000 Y0.450000
+G1 X0.048333 Y0.445000
+G1 X0.128333 Y0.445000
+G1 X0.131667 Y0.450000
+G1 X0.128333 Y0.455000
+G1 X0.048333 Y0.455000
+G0 Z#100
+(polygon end, distance 0.18)
+(polygon 2)
+G0 X0.195000 Y0.455000    (start point)
+G1 Z#101
+G1 X0.195000 Y0.443333
+G1 X0.281667 Y0.443333
+G1 X0.281667 Y0.455000
+G1 X0.195000 Y0.455000
+G0 Z#100
+(polygon end, distance 0.20)
+(polygon 3)
+G0 X0.048333 Y0.380000    (start point)
+G1 Z#101
+G1 X0.045000 Y0.376667
+G1 X0.045000 Y0.296667
+G1 X0.050000 Y0.293333
+G1 X0.055000 Y0.296667
+G1 X0.056667 Y0.375000
+G1 X0.053333 Y0.380000
+G1 X0.048333 Y0.380000
+G0 Z#100
+(polygon end, distance 0.19)
+(polygon 4)
+G0 X0.225000 Y0.356667    (start point)
+G1 Z#101
+G1 X0.218333 Y0.348333
+G1 X0.280000 Y0.288333
+G1 X0.286667 Y0.296667
+G1 X0.225000 Y0.356667
+G0 Z#100
+(polygon end, distance 0.19)
+(polygon 5)
+G0 X0.123333 Y0.355000    (start point)
+G1 Z#101
+G1 X0.120000 Y0.351667
+G1 X0.120000 Y0.346667
+G1 X0.178333 Y0.290000
+G1 X0.183333 Y0.291667
+G1 X0.185000 Y0.296667
+G1 X0.128333 Y0.355000
+G1 X0.123333 Y0.355000
+G0 Z#100
+(polygon end, distance 0.19)
+(polygon 6)
+G0 X0.045000 Y0.230000    (start point)
+G1 Z#101
+G1 X0.045000 Y0.143333
+G1 X0.056667 Y0.143333
+G1 X0.056667 Y0.230000
+G1 X0.045000 Y0.230000
+G0 Z#100
+(polygon end, distance 0.20)
+(polygon 7)
+G0 X0.271667 Y0.206667    (start point)
+G1 Z#101
+G1 X0.268333 Y0.196667
+G1 X0.270000 Y0.195000
+G1 X0.348333 Y0.163333
+G1 X0.353333 Y0.173333
+G1 X0.351667 Y0.175000
+G1 X0.288333 Y0.200000
+G1 X0.271667 Y0.206667
+G0 Z#100
+(polygon end, distance 0.20)
+(polygon 8)
+G0 X0.123333 Y0.205000    (start point)
+G1 Z#101
+G1 X0.120000 Y0.200000
+G1 X0.123333 Y0.195000
+G1 X0.191667 Y0.165000
+G1 X0.198333 Y0.166667
+G1 X0.201667 Y0.171667
+G1 X0.196667 Y0.176667
+G1 X0.128333 Y0.205000
+G1 X0.123333 Y0.205000
+G0 Z#100
+(polygon end, distance 0.19)
+(end, total distance 38.79mm = 1.53in)
+M5 M9 M2
Index: ref/padstack.gcode/padstack.gcode.bottom.cnc
===================================================================
--- ref/padstack.gcode/padstack.gcode.bottom.cnc	(nonexistent)
+++ ref/padstack.gcode/padstack.gcode.bottom.cnc	(revision 27031)
@@ -0,0 +1,73 @@
+(Created by G-code exporter)
+(600 dpi)
+(Unit: inch)
+(Board size: 0.50x0.50 inches)#100=0.002000  (safe Z)
+#101=-0.000050  (cutting depth)
+(---------------------------------)
+G17 G20 G90 G64 P0.003 M3 S3000 M7 F1
+G0 Z#100
+(polygon 1)
+G0 X0.116667 Y0.443333    (start point)
+G1 Z#101
+G1 X0.108333 Y0.440000
+G1 X0.098333 Y0.435000
+G1 X0.086667 Y0.421667
+G1 X0.081667 Y0.411667
+G1 X0.081667 Y0.386667
+G1 X0.086667 Y0.376667
+G1 X0.098333 Y0.363333
+G1 X0.111667 Y0.356667
+G1 X0.136667 Y0.356667
+G1 X0.150000 Y0.363333
+G1 X0.161667 Y0.376667
+G1 X0.166667 Y0.386667
+G1 X0.166667 Y0.411667
+G1 X0.161667 Y0.421667
+G1 X0.150000 Y0.435000
+G1 X0.136667 Y0.441667
+G1 X0.116667 Y0.443333
+G0 Z#100
+(polygon end, distance 0.28)
+(polygon 2)
+G0 X0.420000 Y0.415000    (start point)
+G1 Z#101
+G1 X0.408333 Y0.405000
+G1 X0.346667 Y0.405000
+G1 X0.343333 Y0.400000
+G1 X0.346667 Y0.395000
+G1 X0.408333 Y0.393333
+G1 X0.420000 Y0.383333
+G1 X0.428333 Y0.383333
+G1 X0.440000 Y0.393333
+G1 X0.476667 Y0.395000
+G1 X0.480000 Y0.400000
+G1 X0.476667 Y0.405000
+G1 X0.440000 Y0.405000
+G1 X0.428333 Y0.415000
+G1 X0.420000 Y0.415000
+G0 Z#100
+(polygon end, distance 0.30)
+(polygon 3)
+G0 X0.266667 Y0.223333    (start point)
+G1 Z#101
+G1 X0.250000 Y0.216667
+G1 X0.240000 Y0.208333
+G1 X0.230000 Y0.196667
+G1 X0.225000 Y0.178333
+G1 X0.226667 Y0.161667
+G1 X0.233333 Y0.146667
+G1 X0.246667 Y0.133333
+G1 X0.261667 Y0.126667
+G1 X0.286667 Y0.126667
+G1 X0.301667 Y0.133333
+G1 X0.315000 Y0.146667
+G1 X0.321667 Y0.161667
+G1 X0.321667 Y0.186667
+G1 X0.315000 Y0.201667
+G1 X0.301667 Y0.215000
+G1 X0.286667 Y0.221667
+G1 X0.266667 Y0.223333
+G0 Z#100
+(polygon end, distance 0.31)
+(end, total distance 22.39mm = 0.88in)
+M5 M9 M2
Index: ref/padstack.gcode/padstack.gcode.drill.cnc
===================================================================
--- ref/padstack.gcode/padstack.gcode.drill.cnc	(nonexistent)
+++ ref/padstack.gcode/padstack.gcode.drill.cnc	(revision 27031)
@@ -0,0 +1,11 @@
+(Created by G-code exporter)
+(drill file: 2 drills)
+(Unit: inch)
+(Board size: 0.50x0.50 inches)#100=0.002000  (safe Z)
+#101=-0.002000  (drill depth)
+(---------------------------------)
+G17 G20 G90 G64 P0.003 M3 S3000 M7 F1
+G81 X0.125000 Y0.400000 Z#101 R#100
+G81 X0.425000 Y0.400000 Z#101 R#100
+M5 M9 M2
+(end, total distance 7.62mm = 0.30in)
Index: ref/padstack.gcode/padstack.gcode.group-1.cnc
===================================================================
--- ref/padstack.gcode/padstack.gcode.group-1.cnc	(nonexistent)
+++ ref/padstack.gcode/padstack.gcode.group-1.cnc	(revision 27031)
@@ -0,0 +1,75 @@
+(Created by G-code exporter)
+(600 dpi)
+(Unit: inch)
+(Board size: 0.50x0.50 inches)#100=0.002000  (safe Z)
+#101=-0.000050  (cutting depth)
+(---------------------------------)
+G17 G20 G90 G64 P0.003 M3 S3000 M7 F1
+G0 Z#100
+(polygon 1)
+G0 X0.368333 Y0.443333    (start point)
+G1 Z#101
+G1 X0.360000 Y0.440000
+G1 X0.350000 Y0.435000
+G1 X0.338333 Y0.421667
+G1 X0.333333 Y0.411667
+G1 X0.333333 Y0.386667
+G1 X0.338333 Y0.376667
+G1 X0.350000 Y0.363333
+G1 X0.363333 Y0.356667
+G1 X0.388333 Y0.356667
+G1 X0.401667 Y0.363333
+G1 X0.413333 Y0.376667
+G1 X0.418333 Y0.386667
+G1 X0.418333 Y0.411667
+G1 X0.413333 Y0.421667
+G1 X0.401667 Y0.435000
+G1 X0.388333 Y0.441667
+G1 X0.368333 Y0.443333
+G0 Z#100
+(polygon end, distance 0.28)
+(polygon 2)
+G0 X0.068333 Y0.438333    (start point)
+G1 Z#101
+G1 X0.051667 Y0.430000
+G1 X0.043333 Y0.420000
+G1 X0.036667 Y0.406667
+G1 X0.036667 Y0.391667
+G1 X0.043333 Y0.378333
+G1 X0.051667 Y0.368333
+G1 X0.068333 Y0.360000
+G1 X0.083333 Y0.360000
+G1 X0.100000 Y0.368333
+G1 X0.108333 Y0.378333
+G1 X0.115000 Y0.391667
+G1 X0.115000 Y0.406667
+G1 X0.106667 Y0.423333
+G1 X0.096667 Y0.431667
+G1 X0.083333 Y0.438333
+G1 X0.068333 Y0.438333
+G0 Z#100
+(polygon end, distance 0.25)
+(polygon 3)
+G0 X0.218333 Y0.223333    (start point)
+G1 Z#101
+G1 X0.201667 Y0.216667
+G1 X0.191667 Y0.208333
+G1 X0.181667 Y0.196667
+G1 X0.176667 Y0.178333
+G1 X0.178333 Y0.161667
+G1 X0.185000 Y0.146667
+G1 X0.198333 Y0.133333
+G1 X0.213333 Y0.126667
+G1 X0.238333 Y0.126667
+G1 X0.253333 Y0.133333
+G1 X0.266667 Y0.146667
+G1 X0.273333 Y0.161667
+G1 X0.273333 Y0.186667
+G1 X0.266667 Y0.201667
+G1 X0.253333 Y0.215000
+G1 X0.238333 Y0.221667
+G1 X0.218333 Y0.223333
+G0 Z#100
+(polygon end, distance 0.31)
+(end, total distance 21.06mm = 0.83in)
+M5 M9 M2
Index: ref/padstack.gcode/padstack.gcode.top.cnc
===================================================================
--- ref/padstack.gcode/padstack.gcode.top.cnc	(nonexistent)
+++ ref/padstack.gcode/padstack.gcode.top.cnc	(revision 27031)
@@ -0,0 +1,63 @@
+(Created by G-code exporter)
+(600 dpi)
+(Unit: inch)
+(Board size: 0.50x0.50 inches)#100=0.002000  (safe Z)
+#101=-0.000050  (cutting depth)
+(---------------------------------)
+G17 G20 G90 G64 P0.003 M3 S3000 M7 F1
+G0 Z#100
+(polygon 1)
+G0 X0.025000 Y0.450000    (start point)
+G1 Z#101
+G1 X0.025000 Y0.348333
+G1 X0.126667 Y0.373333
+G1 X0.126667 Y0.450000
+G1 X0.025000 Y0.450000
+G0 Z#100
+(polygon end, distance 0.38)
+(polygon 2)
+G0 X0.368333 Y0.443333    (start point)
+G1 Z#101
+G1 X0.360000 Y0.440000
+G1 X0.350000 Y0.435000
+G1 X0.338333 Y0.421667
+G1 X0.333333 Y0.411667
+G1 X0.333333 Y0.386667
+G1 X0.338333 Y0.376667
+G1 X0.350000 Y0.363333
+G1 X0.363333 Y0.356667
+G1 X0.388333 Y0.356667
+G1 X0.401667 Y0.363333
+G1 X0.413333 Y0.376667
+G1 X0.418333 Y0.386667
+G1 X0.418333 Y0.411667
+G1 X0.413333 Y0.421667
+G1 X0.401667 Y0.435000
+G1 X0.388333 Y0.441667
+G1 X0.368333 Y0.443333
+G0 Z#100
+(polygon end, distance 0.28)
+(polygon 3)
+G0 X0.068333 Y0.220000    (start point)
+G1 Z#101
+G1 X0.056667 Y0.215000
+G1 X0.043333 Y0.206667
+G1 X0.033333 Y0.191667
+G1 X0.030000 Y0.178333
+G1 X0.031667 Y0.161667
+G1 X0.040000 Y0.145000
+G1 X0.050000 Y0.136667
+G1 X0.063333 Y0.130000
+G1 X0.088333 Y0.130000
+G1 X0.101667 Y0.136667
+G1 X0.111667 Y0.145000
+G1 X0.120000 Y0.161667
+G1 X0.120000 Y0.186667
+G1 X0.111667 Y0.203333
+G1 X0.101667 Y0.211667
+G1 X0.088333 Y0.218333
+G1 X0.068333 Y0.220000
+G0 Z#100
+(polygon end, distance 0.29)
+(end, total distance 24.05mm = 0.95in)
+M5 M9 M2
Index: ref/poly_hole.gcode/poly_hole.gcode.top.cnc
===================================================================
--- ref/poly_hole.gcode/poly_hole.gcode.top.cnc	(nonexistent)
+++ ref/poly_hole.gcode/poly_hole.gcode.top.cnc	(revision 27031)
@@ -0,0 +1,98 @@
+(Created by G-code exporter)
+(600 dpi)
+(Unit: inch)
+(Board size: 0.50x0.50 inches)#100=0.002000  (safe Z)
+#101=-0.000050  (cutting depth)
+(---------------------------------)
+G17 G20 G90 G64 P0.003 M3 S3000 M7 F1
+G0 Z#100
+(polygon 1)
+G0 X0.025000 Y0.475000    (start point)
+G1 Z#101
+G1 X0.025000 Y0.373333
+G1 X0.065000 Y0.411667
+G1 X0.126667 Y0.475000
+G1 X0.025000 Y0.475000
+G0 Z#100
+(polygon end, distance 0.35)
+(polygon 2)
+G0 X0.051667 Y0.450000    (start point)
+G1 Z#101
+G1 X0.051667 Y0.426667
+G1 X0.061667 Y0.433333
+G1 X0.070000 Y0.443333
+G1 X0.075000 Y0.450000
+G1 X0.051667 Y0.450000
+G0 Z#100
+(polygon end, distance 0.08)
+(polygon 3)
+G0 X0.150000 Y0.475000    (start point)
+G1 Z#101
+G1 X0.025000 Y0.348333
+G1 X0.151667 Y0.348333
+G1 X0.151667 Y0.475000
+G1 X0.150000 Y0.475000
+G0 Z#100
+(polygon end, distance 0.43)
+(polygon 4)
+G0 X0.101667 Y0.400000    (start point)
+G1 Z#101
+G1 X0.078333 Y0.375000
+G1 X0.125000 Y0.375000
+G1 X0.125000 Y0.400000
+G1 X0.101667 Y0.400000
+G0 Z#100
+(polygon end, distance 0.13)
+(polygon 5)
+G0 X0.300000 Y0.475000    (start point)
+G1 Z#101
+G1 X0.175000 Y0.348333
+G1 X0.426667 Y0.348333
+G1 X0.301667 Y0.475000
+G1 X0.300000 Y0.475000
+G0 Z#100
+(polygon end, distance 0.61)
+(polygon 6)
+G0 X0.276667 Y0.425000    (start point)
+G1 Z#101
+G1 X0.276667 Y0.375000
+G1 X0.325000 Y0.375000
+G1 X0.325000 Y0.425000
+G1 X0.276667 Y0.425000
+G0 Z#100
+(polygon end, distance 0.20)
+(polygon 7)
+G0 X0.025000 Y0.325000    (start point)
+G1 Z#101
+G1 X0.025000 Y0.323333
+G1 X0.050000 Y0.150000
+G1 X0.051667 Y0.148333
+G1 X0.296667 Y0.296667
+G1 X0.301667 Y0.300000
+G1 X0.171667 Y0.310000
+G1 X0.110000 Y0.316667
+G1 X0.025000 Y0.325000
+G0 Z#100
+(polygon end, distance 0.75)
+(polygon 8)
+G0 X0.076667 Y0.275000    (start point)
+G1 Z#101
+G1 X0.076667 Y0.223333
+G1 X0.101667 Y0.200000
+G1 X0.125000 Y0.225000
+G1 X0.125000 Y0.250000
+G1 X0.098333 Y0.275000
+G1 X0.076667 Y0.275000
+G0 Z#100
+(polygon end, distance 0.20)
+(polygon 9)
+G0 X0.151667 Y0.275000    (start point)
+G1 Z#101
+G1 X0.151667 Y0.250000
+G1 X0.175000 Y0.250000
+G1 X0.175000 Y0.275000
+G1 X0.151667 Y0.275000
+G0 Z#100
+(polygon end, distance 0.10)
+(end, total distance 72.25mm = 2.84in)
+M5 M9 M2
Index: ref/poly_rect.gcode/poly_rect.gcode.top.cnc
===================================================================
--- ref/poly_rect.gcode/poly_rect.gcode.top.cnc	(nonexistent)
+++ ref/poly_rect.gcode/poly_rect.gcode.top.cnc	(revision 27031)
@@ -0,0 +1,46 @@
+(Created by G-code exporter)
+(600 dpi)
+(Unit: inch)
+(Board size: 0.50x0.50 inches)#100=0.002000  (safe Z)
+#101=-0.000050  (cutting depth)
+(---------------------------------)
+G17 G20 G90 G64 P0.003 M3 S3000 M7 F1
+G0 Z#100
+(polygon 1)
+G0 X0.050000 Y0.475000    (start point)
+G1 Z#101
+G1 X0.050000 Y0.048333
+G1 X0.076667 Y0.048333
+G1 X0.076667 Y0.475000
+G1 X0.050000 Y0.475000
+G0 Z#100
+(polygon end, distance 0.91)
+(polygon 2)
+G0 X0.125000 Y0.475000    (start point)
+G1 Z#101
+G1 X0.125000 Y0.448333
+G1 X0.476667 Y0.448333
+G1 X0.476667 Y0.475000
+G1 X0.125000 Y0.475000
+G0 Z#100
+(polygon end, distance 0.76)
+(polygon 3)
+G0 X0.125000 Y0.425000    (start point)
+G1 Z#101
+G1 X0.125000 Y0.048333
+G1 X0.401667 Y0.048333
+G1 X0.401667 Y0.425000
+G1 X0.125000 Y0.425000
+G0 Z#100
+(polygon end, distance 1.31)
+(polygon 4)
+G0 X0.425000 Y0.075000    (start point)
+G1 Z#101
+G1 X0.425000 Y0.048333
+G1 X0.451667 Y0.048333
+G1 X0.451667 Y0.075000
+G1 X0.425000 Y0.075000
+G0 Z#100
+(polygon end, distance 0.11)
+(end, total distance 78.15mm = 3.08in)
+M5 M9 M2
Index: ref/poly_triangle.gcode/poly_triangle.gcode.top.cnc
===================================================================
--- ref/poly_triangle.gcode/poly_triangle.gcode.top.cnc	(nonexistent)
+++ ref/poly_triangle.gcode/poly_triangle.gcode.top.cnc	(revision 27031)
@@ -0,0 +1,48 @@
+(Created by G-code exporter)
+(600 dpi)
+(Unit: inch)
+(Board size: 0.50x0.50 inches)#100=0.002000  (safe Z)
+#101=-0.000050  (cutting depth)
+(---------------------------------)
+G17 G20 G90 G64 P0.003 M3 S3000 M7 F1
+G0 Z#100
+(polygon 1)
+G0 X0.025000 Y0.475000    (start point)
+G1 Z#101
+G1 X0.025000 Y0.373333
+G1 X0.126667 Y0.473333
+G1 X0.126667 Y0.475000
+G1 X0.025000 Y0.475000
+G0 Z#100
+(polygon end, distance 0.35)
+(polygon 2)
+G0 X0.150000 Y0.475000    (start point)
+G1 Z#101
+G1 X0.025000 Y0.348333
+G1 X0.151667 Y0.348333
+G1 X0.151667 Y0.475000
+G1 X0.150000 Y0.475000
+G0 Z#100
+(polygon end, distance 0.43)
+(polygon 3)
+G0 X0.300000 Y0.475000    (start point)
+G1 Z#101
+G1 X0.175000 Y0.348333
+G1 X0.426667 Y0.348333
+G1 X0.301667 Y0.475000
+G1 X0.300000 Y0.475000
+G0 Z#100
+(polygon end, distance 0.61)
+(polygon 4)
+G0 X0.025000 Y0.325000    (start point)
+G1 Z#101
+G1 X0.025000 Y0.323333
+G1 X0.050000 Y0.150000
+G1 X0.051667 Y0.148333
+G1 X0.301667 Y0.298333
+G1 X0.290000 Y0.300000
+G1 X0.025000 Y0.325000
+G0 Z#100
+(polygon end, distance 0.75)
+(end, total distance 54.32mm = 2.14in)
+M5 M9 M2
Index: ref/rat.gcode/rat.gcode.*.cnc
===================================================================
Index: ref/thermal_last.gcode/thermal_last.gcode.bottom.cnc
===================================================================
--- ref/thermal_last.gcode/thermal_last.gcode.bottom.cnc	(nonexistent)
+++ ref/thermal_last.gcode/thermal_last.gcode.bottom.cnc	(revision 27031)
@@ -0,0 +1,31 @@
+(Created by G-code exporter)
+(600 dpi)
+(Unit: inch)
+(Board size: 0.50x0.50 inches)#100=0.002000  (safe Z)
+#101=-0.000050  (cutting depth)
+(---------------------------------)
+G17 G20 G90 G64 P0.003 M3 S3000 M7 F1
+G0 Z#100
+(polygon 1)
+G0 X0.391667 Y0.438333    (start point)
+G1 Z#101
+G1 X0.375000 Y0.430000
+G1 X0.366667 Y0.420000
+G1 X0.360000 Y0.406667
+G1 X0.360000 Y0.391667
+G1 X0.366667 Y0.378333
+G1 X0.375000 Y0.368333
+G1 X0.391667 Y0.360000
+G1 X0.406667 Y0.360000
+G1 X0.423333 Y0.368333
+G1 X0.431667 Y0.378333
+G1 X0.438333 Y0.391667
+G1 X0.438333 Y0.406667
+G1 X0.430000 Y0.423333
+G1 X0.420000 Y0.431667
+G1 X0.406667 Y0.438333
+G1 X0.391667 Y0.438333
+G0 Z#100
+(polygon end, distance 0.25)
+(end, total distance 6.25mm = 0.25in)
+M5 M9 M2
Index: ref/thermal_last.gcode/thermal_last.gcode.drill.cnc
===================================================================
--- ref/thermal_last.gcode/thermal_last.gcode.drill.cnc	(nonexistent)
+++ ref/thermal_last.gcode/thermal_last.gcode.drill.cnc	(revision 27031)
@@ -0,0 +1,10 @@
+(Created by G-code exporter)
+(drill file: 1 drills)
+(Unit: inch)
+(Board size: 0.50x0.50 inches)#100=0.002000  (safe Z)
+#101=-0.002000  (drill depth)
+(---------------------------------)
+G17 G20 G90 G64 P0.003 M3 S3000 M7 F1
+G81 X0.400000 Y0.400000 Z#101 R#100
+M5 M9 M2
+(end, total distance 0.00mm = 0.00in)
Index: ref/thermal_last.gcode/thermal_last.gcode.group-1.cnc
===================================================================
--- ref/thermal_last.gcode/thermal_last.gcode.group-1.cnc	(nonexistent)
+++ ref/thermal_last.gcode/thermal_last.gcode.group-1.cnc	(revision 27031)
@@ -0,0 +1,48 @@
+(Created by G-code exporter)
+(600 dpi)
+(Unit: inch)
+(Board size: 0.50x0.50 inches)#100=0.002000  (safe Z)
+#101=-0.000050  (cutting depth)
+(---------------------------------)
+G17 G20 G90 G64 P0.003 M3 S3000 M7 F1
+G0 Z#100
+(polygon 1)
+G0 X0.093333 Y0.438333    (start point)
+G1 Z#101
+G1 X0.076667 Y0.430000
+G1 X0.068333 Y0.420000
+G1 X0.061667 Y0.406667
+G1 X0.061667 Y0.391667
+G1 X0.070000 Y0.375000
+G1 X0.075000 Y0.371667
+G1 X0.075000 Y0.361667
+G1 X0.080000 Y0.363333
+G1 X0.101667 Y0.360000
+G1 X0.121667 Y0.363333
+G1 X0.128333 Y0.358333
+G1 X0.126667 Y0.348333
+G1 X0.115000 Y0.341667
+G1 X0.091667 Y0.340000
+G1 X0.075000 Y0.346667
+G1 X0.075000 Y0.323333
+G1 X0.176667 Y0.323333
+G1 X0.176667 Y0.425000
+G1 X0.153333 Y0.425000
+G1 X0.160000 Y0.406667
+G1 X0.160000 Y0.391667
+G1 X0.155000 Y0.376667
+G1 X0.151667 Y0.371667
+G1 X0.141667 Y0.371667
+G1 X0.138333 Y0.376667
+G1 X0.141667 Y0.400000
+G1 X0.140000 Y0.411667
+G1 X0.136667 Y0.418333
+G1 X0.140000 Y0.425000
+G1 X0.128333 Y0.425000
+G1 X0.125000 Y0.430000
+G1 X0.108333 Y0.438333
+G1 X0.093333 Y0.438333
+G0 Z#100
+(polygon end, distance 0.64)
+(end, total distance 16.28mm = 0.64in)
+M5 M9 M2
Index: ref/thermal_last.gcode/thermal_last.gcode.top.cnc
===================================================================
--- ref/thermal_last.gcode/thermal_last.gcode.top.cnc	(nonexistent)
+++ ref/thermal_last.gcode/thermal_last.gcode.top.cnc	(revision 27031)
@@ -0,0 +1,31 @@
+(Created by G-code exporter)
+(600 dpi)
+(Unit: inch)
+(Board size: 0.50x0.50 inches)#100=0.002000  (safe Z)
+#101=-0.000050  (cutting depth)
+(---------------------------------)
+G17 G20 G90 G64 P0.003 M3 S3000 M7 F1
+G0 Z#100
+(polygon 1)
+G0 X0.093333 Y0.438333    (start point)
+G1 Z#101
+G1 X0.076667 Y0.430000
+G1 X0.068333 Y0.420000
+G1 X0.061667 Y0.406667
+G1 X0.061667 Y0.391667
+G1 X0.068333 Y0.378333
+G1 X0.076667 Y0.368333
+G1 X0.093333 Y0.360000
+G1 X0.108333 Y0.360000
+G1 X0.125000 Y0.368333
+G1 X0.133333 Y0.378333
+G1 X0.140000 Y0.391667
+G1 X0.140000 Y0.406667
+G1 X0.131667 Y0.423333
+G1 X0.121667 Y0.431667
+G1 X0.108333 Y0.438333
+G1 X0.093333 Y0.438333
+G0 Z#100
+(polygon end, distance 0.25)
+(end, total distance 6.25mm = 0.25in)
+M5 M9 M2
Index: ref/thermal_layer.gcode/thermal_layer.gcode.bottom.cnc
===================================================================
--- ref/thermal_layer.gcode/thermal_layer.gcode.bottom.cnc	(nonexistent)
+++ ref/thermal_layer.gcode/thermal_layer.gcode.bottom.cnc	(revision 27031)
@@ -0,0 +1,108 @@
+(Created by G-code exporter)
+(600 dpi)
+(Unit: inch)
+(Board size: 0.50x0.50 inches)#100=0.002000  (safe Z)
+#101=-0.000050  (cutting depth)
+(---------------------------------)
+G17 G20 G90 G64 P0.003 M3 S3000 M7 F1
+G0 Z#100
+(polygon 1)
+G0 X0.216667 Y0.438333    (start point)
+G1 Z#101
+G1 X0.200000 Y0.430000
+G1 X0.191667 Y0.420000
+G1 X0.185000 Y0.406667
+G1 X0.185000 Y0.391667
+G1 X0.191667 Y0.378333
+G1 X0.200000 Y0.368333
+G1 X0.216667 Y0.360000
+G1 X0.231667 Y0.360000
+G1 X0.248333 Y0.368333
+G1 X0.256667 Y0.378333
+G1 X0.263333 Y0.391667
+G1 X0.263333 Y0.406667
+G1 X0.255000 Y0.423333
+G1 X0.245000 Y0.431667
+G1 X0.231667 Y0.438333
+G1 X0.216667 Y0.438333
+G0 Z#100
+(polygon end, distance 0.25)
+(polygon 2)
+G0 X0.391667 Y0.438333    (start point)
+G1 Z#101
+G1 X0.375000 Y0.430000
+G1 X0.371667 Y0.425000
+G1 X0.360000 Y0.425000
+G1 X0.365000 Y0.420000
+G1 X0.360000 Y0.411667
+G1 X0.360000 Y0.386667
+G1 X0.365000 Y0.378333
+G1 X0.350000 Y0.365000
+G1 X0.343333 Y0.380000
+G1 X0.340000 Y0.400000
+G1 X0.343333 Y0.418333
+G1 X0.346667 Y0.425000
+G1 X0.323333 Y0.425000
+G1 X0.323333 Y0.323333
+G1 X0.425000 Y0.323333
+G1 X0.425000 Y0.346667
+G1 X0.415000 Y0.341667
+G1 X0.383333 Y0.341667
+G1 X0.365000 Y0.350000
+G1 X0.378333 Y0.365000
+G1 X0.385000 Y0.361667
+G1 X0.413333 Y0.361667
+G1 X0.420000 Y0.365000
+G1 X0.421667 Y0.361667
+G1 X0.425000 Y0.361667
+G1 X0.425000 Y0.371667
+G1 X0.430000 Y0.375000
+G1 X0.438333 Y0.391667
+G1 X0.438333 Y0.406667
+G1 X0.430000 Y0.423333
+G1 X0.420000 Y0.431667
+G1 X0.406667 Y0.438333
+G1 X0.391667 Y0.438333
+G0 Z#100
+(polygon end, distance 0.67)
+(polygon 3)
+G0 X0.216667 Y0.263333    (start point)
+G1 Z#101
+G1 X0.200000 Y0.255000
+G1 X0.191667 Y0.245000
+G1 X0.185000 Y0.231667
+G1 X0.185000 Y0.216667
+G1 X0.191667 Y0.203333
+G1 X0.200000 Y0.193333
+G1 X0.216667 Y0.185000
+G1 X0.231667 Y0.185000
+G1 X0.248333 Y0.193333
+G1 X0.256667 Y0.203333
+G1 X0.263333 Y0.216667
+G1 X0.263333 Y0.231667
+G1 X0.255000 Y0.248333
+G1 X0.245000 Y0.256667
+G1 X0.231667 Y0.263333
+G1 X0.216667 Y0.263333
+G0 Z#100
+(polygon end, distance 0.25)
+(polygon 4)
+G0 X0.391667 Y0.263333    (start point)
+G1 Z#101
+G1 X0.375000 Y0.255000
+G1 X0.371667 Y0.250000
+G1 X0.323333 Y0.250000
+G1 X0.323333 Y0.148333
+G1 X0.425000 Y0.148333
+G1 X0.425000 Y0.196667
+G1 X0.430000 Y0.200000
+G1 X0.438333 Y0.216667
+G1 X0.438333 Y0.231667
+G1 X0.430000 Y0.248333
+G1 X0.420000 Y0.256667
+G1 X0.406667 Y0.263333
+G1 X0.391667 Y0.263333
+G0 Z#100
+(polygon end, distance 0.43)
+(end, total distance 40.22mm = 1.58in)
+M5 M9 M2
Index: ref/thermal_layer.gcode/thermal_layer.gcode.drill.cnc
===================================================================
--- ref/thermal_layer.gcode/thermal_layer.gcode.drill.cnc	(nonexistent)
+++ ref/thermal_layer.gcode/thermal_layer.gcode.drill.cnc	(revision 27031)
@@ -0,0 +1,13 @@
+(Created by G-code exporter)
+(drill file: 4 drills)
+(Unit: inch)
+(Board size: 0.50x0.50 inches)#100=0.002000  (safe Z)
+#101=-0.002000  (drill depth)
+(---------------------------------)
+G17 G20 G90 G64 P0.003 M3 S3000 M7 F1
+G81 X0.225000 Y0.225000 Z#101 R#100
+G81 X0.225000 Y0.400000 Z#101 R#100
+G81 X0.400000 Y0.400000 Z#101 R#100
+G81 X0.400000 Y0.225000 Z#101 R#100
+M5 M9 M2
+(end, total distance 13.33mm = 0.53in)
Index: ref/thermal_layer.gcode/thermal_layer.gcode.group-1.cnc
===================================================================
--- ref/thermal_layer.gcode/thermal_layer.gcode.group-1.cnc	(nonexistent)
+++ ref/thermal_layer.gcode/thermal_layer.gcode.group-1.cnc	(revision 27031)
@@ -0,0 +1,94 @@
+(Created by G-code exporter)
+(600 dpi)
+(Unit: inch)
+(Board size: 0.50x0.50 inches)#100=0.002000  (safe Z)
+#101=-0.000050  (cutting depth)
+(---------------------------------)
+G17 G20 G90 G64 P0.003 M3 S3000 M7 F1
+G0 Z#100
+(polygon 1)
+G0 X0.093333 Y0.438333    (start point)
+G1 Z#101
+G1 X0.076667 Y0.430000
+G1 X0.068333 Y0.420000
+G1 X0.061667 Y0.406667
+G1 X0.061667 Y0.391667
+G1 X0.068333 Y0.378333
+G1 X0.076667 Y0.368333
+G1 X0.093333 Y0.360000
+G1 X0.108333 Y0.360000
+G1 X0.125000 Y0.368333
+G1 X0.133333 Y0.378333
+G1 X0.140000 Y0.391667
+G1 X0.140000 Y0.406667
+G1 X0.131667 Y0.423333
+G1 X0.121667 Y0.431667
+G1 X0.108333 Y0.438333
+G1 X0.093333 Y0.438333
+G0 Z#100
+(polygon end, distance 0.25)
+(polygon 2)
+G0 X0.268333 Y0.438333    (start point)
+G1 Z#101
+G1 X0.251667 Y0.430000
+G1 X0.243333 Y0.420000
+G1 X0.236667 Y0.406667
+G1 X0.236667 Y0.391667
+G1 X0.243333 Y0.378333
+G1 X0.251667 Y0.368333
+G1 X0.268333 Y0.360000
+G1 X0.283333 Y0.360000
+G1 X0.300000 Y0.368333
+G1 X0.308333 Y0.378333
+G1 X0.315000 Y0.391667
+G1 X0.315000 Y0.406667
+G1 X0.306667 Y0.423333
+G1 X0.296667 Y0.431667
+G1 X0.283333 Y0.438333
+G1 X0.268333 Y0.438333
+G0 Z#100
+(polygon end, distance 0.25)
+(polygon 3)
+G0 X0.093333 Y0.263333    (start point)
+G1 Z#101
+G1 X0.076667 Y0.255000
+G1 X0.068333 Y0.245000
+G1 X0.061667 Y0.231667
+G1 X0.061667 Y0.216667
+G1 X0.068333 Y0.203333
+G1 X0.076667 Y0.193333
+G1 X0.093333 Y0.185000
+G1 X0.108333 Y0.185000
+G1 X0.125000 Y0.193333
+G1 X0.133333 Y0.203333
+G1 X0.140000 Y0.216667
+G1 X0.140000 Y0.231667
+G1 X0.131667 Y0.248333
+G1 X0.121667 Y0.256667
+G1 X0.108333 Y0.263333
+G1 X0.093333 Y0.263333
+G0 Z#100
+(polygon end, distance 0.25)
+(polygon 4)
+G0 X0.268333 Y0.263333    (start point)
+G1 Z#101
+G1 X0.251667 Y0.255000
+G1 X0.243333 Y0.245000
+G1 X0.236667 Y0.231667
+G1 X0.236667 Y0.216667
+G1 X0.243333 Y0.203333
+G1 X0.251667 Y0.193333
+G1 X0.268333 Y0.185000
+G1 X0.283333 Y0.185000
+G1 X0.300000 Y0.193333
+G1 X0.308333 Y0.203333
+G1 X0.315000 Y0.216667
+G1 X0.315000 Y0.231667
+G1 X0.306667 Y0.248333
+G1 X0.296667 Y0.256667
+G1 X0.283333 Y0.263333
+G1 X0.268333 Y0.263333
+G0 Z#100
+(polygon end, distance 0.25)
+(end, total distance 25.02mm = 0.98in)
+M5 M9 M2
Index: ref/thermal_layer.gcode/thermal_layer.gcode.top.cnc
===================================================================
--- ref/thermal_layer.gcode/thermal_layer.gcode.top.cnc	(nonexistent)
+++ ref/thermal_layer.gcode/thermal_layer.gcode.top.cnc	(revision 27031)
@@ -0,0 +1,178 @@
+(Created by G-code exporter)
+(600 dpi)
+(Unit: inch)
+(Board size: 0.50x0.50 inches)#100=0.002000  (safe Z)
+#101=-0.000050  (cutting depth)
+(---------------------------------)
+G17 G20 G90 G64 P0.003 M3 S3000 M7 F1
+G0 Z#100
+(polygon 1)
+G0 X0.025000 Y0.475000    (start point)
+G1 Z#101
+G1 X0.025000 Y0.373333
+G1 X0.048333 Y0.373333
+G1 X0.041667 Y0.393333
+G1 X0.041667 Y0.405000
+G1 X0.046667 Y0.421667
+G1 X0.051667 Y0.428333
+G1 X0.058333 Y0.428333
+G1 X0.063333 Y0.421667
+G1 X0.060000 Y0.396667
+G1 X0.065000 Y0.380000
+G1 X0.061667 Y0.373333
+G1 X0.073333 Y0.373333
+G1 X0.076667 Y0.368333
+G1 X0.093333 Y0.360000
+G1 X0.108333 Y0.360000
+G1 X0.125000 Y0.368333
+G1 X0.133333 Y0.378333
+G1 X0.140000 Y0.391667
+G1 X0.140000 Y0.406667
+G1 X0.131667 Y0.423333
+G1 X0.126667 Y0.426667
+G1 X0.126667 Y0.438333
+G1 X0.120000 Y0.436667
+G1 X0.098333 Y0.440000
+G1 X0.081667 Y0.435000
+G1 X0.075000 Y0.440000
+G1 X0.073333 Y0.450000
+G1 X0.080000 Y0.455000
+G1 X0.101667 Y0.460000
+G1 X0.120000 Y0.455000
+G1 X0.126667 Y0.453333
+G1 X0.126667 Y0.475000
+G1 X0.025000 Y0.475000
+G0 Z#100
+(polygon end, distance 0.64)
+(polygon 2)
+G0 X0.200000 Y0.475000    (start point)
+G1 Z#101
+G1 X0.200000 Y0.373333
+G1 X0.223333 Y0.373333
+G1 X0.216667 Y0.393333
+G1 X0.216667 Y0.405000
+G1 X0.221667 Y0.421667
+G1 X0.226667 Y0.428333
+G1 X0.233333 Y0.428333
+G1 X0.238333 Y0.421667
+G1 X0.235000 Y0.396667
+G1 X0.240000 Y0.380000
+G1 X0.236667 Y0.375000
+G1 X0.248333 Y0.371667
+G1 X0.250000 Y0.361667
+G1 X0.253333 Y0.361667
+G1 X0.255000 Y0.365000
+G1 X0.261667 Y0.361667
+G1 X0.290000 Y0.361667
+G1 X0.296667 Y0.365000
+G1 X0.310000 Y0.350000
+G1 X0.291667 Y0.341667
+G1 X0.260000 Y0.341667
+G1 X0.250000 Y0.346667
+G1 X0.250000 Y0.323333
+G1 X0.351667 Y0.323333
+G1 X0.351667 Y0.425000
+G1 X0.328333 Y0.425000
+G1 X0.331667 Y0.418333
+G1 X0.335000 Y0.398333
+G1 X0.331667 Y0.380000
+G1 X0.325000 Y0.365000
+G1 X0.310000 Y0.378333
+G1 X0.315000 Y0.386667
+G1 X0.315000 Y0.411667
+G1 X0.310000 Y0.420000
+G1 X0.315000 Y0.423333
+G1 X0.303333 Y0.426667
+G1 X0.301667 Y0.438333
+G1 X0.295000 Y0.436667
+G1 X0.273333 Y0.440000
+G1 X0.256667 Y0.435000
+G1 X0.250000 Y0.440000
+G1 X0.248333 Y0.450000
+G1 X0.255000 Y0.455000
+G1 X0.276667 Y0.460000
+G1 X0.295000 Y0.455000
+G1 X0.301667 Y0.453333
+G1 X0.301667 Y0.475000
+G1 X0.200000 Y0.475000
+G0 Z#100
+(polygon end, distance 1.05)
+(polygon 3)
+G0 X0.025000 Y0.300000    (start point)
+G1 Z#101
+G1 X0.025000 Y0.198333
+G1 X0.048333 Y0.198333
+G1 X0.048333 Y0.200000
+G1 X0.045000 Y0.206667
+G1 X0.041667 Y0.223333
+G1 X0.045000 Y0.243333
+G1 X0.053333 Y0.260000
+G1 X0.070000 Y0.275000
+G1 X0.085000 Y0.281667
+G1 X0.106667 Y0.283333
+G1 X0.120000 Y0.280000
+G1 X0.126667 Y0.278333
+G1 X0.126667 Y0.300000
+G1 X0.025000 Y0.300000
+G0 Z#100
+(polygon end, distance 0.39)
+(polygon 4)
+G0 X0.200000 Y0.300000    (start point)
+G1 Z#101
+G1 X0.200000 Y0.198333
+G1 X0.223333 Y0.198333
+G1 X0.223333 Y0.200000
+G1 X0.220000 Y0.206667
+G1 X0.216667 Y0.223333
+G1 X0.220000 Y0.243333
+G1 X0.228333 Y0.260000
+G1 X0.245000 Y0.275000
+G1 X0.260000 Y0.281667
+G1 X0.281667 Y0.283333
+G1 X0.295000 Y0.280000
+G1 X0.301667 Y0.278333
+G1 X0.301667 Y0.300000
+G1 X0.200000 Y0.300000
+G0 Z#100
+(polygon end, distance 0.39)
+(polygon 5)
+G0 X0.093333 Y0.263333    (start point)
+G1 Z#101
+G1 X0.076667 Y0.255000
+G1 X0.068333 Y0.245000
+G1 X0.061667 Y0.231667
+G1 X0.061667 Y0.216667
+G1 X0.068333 Y0.203333
+G1 X0.076667 Y0.193333
+G1 X0.093333 Y0.185000
+G1 X0.108333 Y0.185000
+G1 X0.125000 Y0.193333
+G1 X0.133333 Y0.203333
+G1 X0.140000 Y0.216667
+G1 X0.140000 Y0.231667
+G1 X0.131667 Y0.248333
+G1 X0.121667 Y0.256667
+G1 X0.108333 Y0.263333
+G1 X0.093333 Y0.263333
+G0 Z#100
+(polygon end, distance 0.25)
+(polygon 6)
+G0 X0.268333 Y0.263333    (start point)
+G1 Z#101
+G1 X0.251667 Y0.255000
+G1 X0.243333 Y0.245000
+G1 X0.236667 Y0.231667
+G1 X0.236667 Y0.216667
+G1 X0.245000 Y0.200000
+G1 X0.250000 Y0.196667
+G1 X0.250000 Y0.148333
+G1 X0.351667 Y0.148333
+G1 X0.351667 Y0.250000
+G1 X0.303333 Y0.250000
+G1 X0.300000 Y0.255000
+G1 X0.283333 Y0.263333
+G1 X0.268333 Y0.263333
+G0 Z#100
+(polygon end, distance 0.43)
+(end, total distance 80.21mm = 3.16in)
+M5 M9 M2