Index: Test_export.sh
===================================================================
--- Test_export.sh	(revision 28443)
+++ Test_export.sh	(revision 28444)
@@ -17,7 +17,6 @@
 png
 gerber
 svg 2>/dev/null
-gcode
 '
 
 have=`./Export.sh  --list`
Index: ref/mech.gcode/mech.gcode.top.cnc
===================================================================
--- ref/mech.gcode/mech.gcode.top.cnc	(revision 28443)
+++ ref/mech.gcode/mech.gcode.top.cnc	(nonexistent)
@@ -1,92 +0,0 @@
-(Created by G-code exporter)
-(600 dpi)
-(Unit: inch)
-(Board size: 0.50x0.50 inches)#100=0.002000  (safe Z)
-#101=-0.000050  (cutting depth)
-(---------------------------------)
-G17 G20 G90 G64 P0.003 M3 S3000 M7 F1
-G0 Z#100
-(polygon 1)
-G0 X0.125000 Y0.460000    (start point)
-G1 Z#101
-G1 X0.125000 Y0.438333
-G1 X0.166667 Y0.438333
-G1 X0.166667 Y0.460000
-G1 X0.125000 Y0.460000
-G0 Z#100
-(polygon end, distance 0.13)
-(polygon 2)
-G0 X0.205000 Y0.460000    (start point)
-G1 Z#101
-G1 X0.205000 Y0.438333
-G1 X0.246667 Y0.438333
-G1 X0.246667 Y0.460000
-G1 X0.205000 Y0.460000
-G0 Z#100
-(polygon end, distance 0.13)
-(polygon 3)
-G0 X0.126667 Y0.410000    (start point)
-G1 Z#101
-G1 X0.120000 Y0.406667
-G1 X0.111667 Y0.396667
-G1 X0.111667 Y0.381667
-G1 X0.123333 Y0.370000
-G1 X0.158333 Y0.370000
-G1 X0.170000 Y0.381667
-G1 X0.170000 Y0.396667
-G1 X0.158333 Y0.408333
-G1 X0.126667 Y0.410000
-G0 Z#100
-(polygon end, distance 0.17)
-(polygon 4)
-G0 X0.206667 Y0.410000    (start point)
-G1 Z#101
-G1 X0.200000 Y0.406667
-G1 X0.191667 Y0.396667
-G1 X0.191667 Y0.381667
-G1 X0.203333 Y0.370000
-G1 X0.238333 Y0.370000
-G1 X0.250000 Y0.381667
-G1 X0.250000 Y0.396667
-G1 X0.238333 Y0.408333
-G1 X0.206667 Y0.410000
-G0 Z#100
-(polygon end, distance 0.17)
-(polygon 5)
-G0 X0.120000 Y0.340000    (start point)
-G1 Z#101
-G1 X0.120000 Y0.298333
-G1 X0.171667 Y0.298333
-G1 X0.171667 Y0.340000
-G1 X0.120000 Y0.340000
-G0 Z#100
-(polygon end, distance 0.19)
-(polygon 6)
-G0 X0.200000 Y0.340000    (start point)
-G1 Z#101
-G1 X0.200000 Y0.298333
-G1 X0.251667 Y0.298333
-G1 X0.251667 Y0.340000
-G1 X0.200000 Y0.340000
-G0 Z#100
-(polygon end, distance 0.19)
-(polygon 7)
-G0 X0.135000 Y0.180000    (start point)
-G1 Z#101
-G1 X0.135000 Y0.158333
-G1 X0.176667 Y0.158333
-G1 X0.176667 Y0.180000
-G1 X0.135000 Y0.180000
-G0 Z#100
-(polygon end, distance 0.13)
-(polygon 8)
-G0 X0.215000 Y0.180000    (start point)
-G1 Z#101
-G1 X0.215000 Y0.158333
-G1 X0.256667 Y0.158333
-G1 X0.256667 Y0.180000
-G1 X0.215000 Y0.180000
-G0 Z#100
-(polygon end, distance 0.13)
-(end, total distance 30.82mm = 1.21in)
-M5 M9 M2
Index: ref/mech.gcode/mech.gcode.bottom.cnc
===================================================================
--- ref/mech.gcode/mech.gcode.bottom.cnc	(revision 28443)
+++ ref/mech.gcode/mech.gcode.bottom.cnc	(nonexistent)
@@ -1,92 +0,0 @@
-(Created by G-code exporter)
-(600 dpi)
-(Unit: inch)
-(Board size: 0.50x0.50 inches)#100=0.002000  (safe Z)
-#101=-0.000050  (cutting depth)
-(---------------------------------)
-G17 G20 G90 G64 P0.003 M3 S3000 M7 F1
-G0 Z#100
-(polygon 1)
-G0 X0.263333 Y0.470000    (start point)
-G1 Z#101
-G1 X0.263333 Y0.428333
-G1 X0.295000 Y0.428333
-G1 X0.295000 Y0.470000
-G1 X0.263333 Y0.470000
-G0 Z#100
-(polygon end, distance 0.15)
-(polygon 2)
-G0 X0.343333 Y0.470000    (start point)
-G1 Z#101
-G1 X0.343333 Y0.428333
-G1 X0.375000 Y0.428333
-G1 X0.375000 Y0.470000
-G1 X0.343333 Y0.470000
-G0 Z#100
-(polygon end, distance 0.15)
-(polygon 3)
-G0 X0.275000 Y0.420000    (start point)
-G1 Z#101
-G1 X0.268333 Y0.416667
-G1 X0.260000 Y0.406667
-G1 X0.260000 Y0.371667
-G1 X0.271667 Y0.360000
-G1 X0.286667 Y0.360000
-G1 X0.298333 Y0.371667
-G1 X0.298333 Y0.406667
-G1 X0.286667 Y0.418333
-G1 X0.275000 Y0.420000
-G0 Z#100
-(polygon end, distance 0.17)
-(polygon 4)
-G0 X0.355000 Y0.420000    (start point)
-G1 Z#101
-G1 X0.348333 Y0.416667
-G1 X0.340000 Y0.406667
-G1 X0.340000 Y0.371667
-G1 X0.351667 Y0.360000
-G1 X0.366667 Y0.360000
-G1 X0.378333 Y0.371667
-G1 X0.378333 Y0.406667
-G1 X0.366667 Y0.418333
-G1 X0.355000 Y0.420000
-G0 Z#100
-(polygon end, distance 0.17)
-(polygon 5)
-G0 X0.248333 Y0.340000    (start point)
-G1 Z#101
-G1 X0.248333 Y0.298333
-G1 X0.300000 Y0.298333
-G1 X0.300000 Y0.340000
-G1 X0.248333 Y0.340000
-G0 Z#100
-(polygon end, distance 0.19)
-(polygon 6)
-G0 X0.328333 Y0.340000    (start point)
-G1 Z#101
-G1 X0.328333 Y0.298333
-G1 X0.380000 Y0.298333
-G1 X0.380000 Y0.340000
-G1 X0.328333 Y0.340000
-G0 Z#100
-(polygon end, distance 0.19)
-(polygon 7)
-G0 X0.253333 Y0.190000    (start point)
-G1 Z#101
-G1 X0.253333 Y0.148333
-G1 X0.285000 Y0.148333
-G1 X0.285000 Y0.190000
-G1 X0.253333 Y0.190000
-G0 Z#100
-(polygon end, distance 0.15)
-(polygon 8)
-G0 X0.333333 Y0.190000    (start point)
-G1 Z#101
-G1 X0.333333 Y0.148333
-G1 X0.365000 Y0.148333
-G1 X0.365000 Y0.190000
-G1 X0.333333 Y0.190000
-G0 Z#100
-(polygon end, distance 0.15)
-(end, total distance 32.86mm = 1.29in)
-M5 M9 M2
Index: ref/mech.gcode/mech.gcode.drill.cnc
===================================================================
--- ref/mech.gcode/mech.gcode.drill.cnc	(revision 28443)
+++ ref/mech.gcode/mech.gcode.drill.cnc	(nonexistent)
@@ -1,11 +0,0 @@
-(Created by G-code exporter)
-(drill file: 2 drills)
-(Unit: inch)
-(Board size: 0.50x0.50 inches)#100=0.002000  (safe Z)
-#101=-0.002000  (drill depth)
-(---------------------------------)
-G17 G20 G90 G64 P0.003 M3 S3000 M7 F1
-G81 X0.280000 Y0.390000 Z#101 R#100
-G81 X0.360000 Y0.390000 Z#101 R#100
-M5 M9 M2
-(end, total distance 2.03mm = 0.08in)
Index: ref/mech.gcode/mech.gcode.group-1.cnc
===================================================================
--- ref/mech.gcode/mech.gcode.group-1.cnc	(revision 28443)
+++ ref/mech.gcode/mech.gcode.group-1.cnc	(nonexistent)
@@ -1,58 +0,0 @@
-(Created by G-code exporter)
-(600 dpi)
-(Unit: inch)
-(Board size: 0.50x0.50 inches)#100=0.002000  (safe Z)
-#101=-0.000050  (cutting depth)
-(---------------------------------)
-G17 G20 G90 G64 P0.003 M3 S3000 M7 F1
-G0 Z#100
-(polygon 1)
-G0 X0.213333 Y0.460000    (start point)
-G1 Z#101
-G1 X0.205000 Y0.451667
-G1 X0.205000 Y0.446667
-G1 X0.213333 Y0.438333
-G1 X0.228333 Y0.438333
-G1 X0.236667 Y0.446667
-G1 X0.236667 Y0.451667
-G1 X0.228333 Y0.460000
-G1 X0.213333 Y0.460000
-G0 Z#100
-(polygon end, distance 0.09)
-(polygon 2)
-G0 X0.138333 Y0.395000    (start point)
-G1 Z#101
-G1 X0.135000 Y0.390000
-G1 X0.136667 Y0.385000
-G1 X0.141667 Y0.383333
-G1 X0.146667 Y0.388333
-G1 X0.143333 Y0.393333
-G1 X0.138333 Y0.395000
-G0 Z#100
-(polygon end, distance 0.03)
-(polygon 3)
-G0 X0.218333 Y0.395000    (start point)
-G1 Z#101
-G1 X0.215000 Y0.390000
-G1 X0.216667 Y0.385000
-G1 X0.221667 Y0.383333
-G1 X0.226667 Y0.388333
-G1 X0.223333 Y0.393333
-G1 X0.218333 Y0.395000
-G0 Z#100
-(polygon end, distance 0.03)
-(polygon 4)
-G0 X0.208333 Y0.330000    (start point)
-G1 Z#101
-G1 X0.200000 Y0.321667
-G1 X0.200000 Y0.316667
-G1 X0.208333 Y0.308333
-G1 X0.243333 Y0.308333
-G1 X0.251667 Y0.316667
-G1 X0.251667 Y0.321667
-G1 X0.243333 Y0.330000
-G1 X0.208333 Y0.330000
-G0 Z#100
-(polygon end, distance 0.13)
-(end, total distance 7.22mm = 0.28in)
-M5 M9 M2
Index: ref/layer_copper.gcode/layer_copper.gcode.group-1.cnc
===================================================================
--- ref/layer_copper.gcode/layer_copper.gcode.group-1.cnc	(revision 28443)
+++ ref/layer_copper.gcode/layer_copper.gcode.group-1.cnc	(nonexistent)
@@ -1,23 +0,0 @@
-(Created by G-code exporter)
-(600 dpi)
-(Unit: inch)
-(Board size: 0.50x0.50 inches)#100=0.002000  (safe Z)
-#101=-0.000050  (cutting depth)
-(---------------------------------)
-G17 G20 G90 G64 P0.003 M3 S3000 M7 F1
-G0 Z#100
-(polygon 1)
-G0 X0.098333 Y0.360000    (start point)
-G1 Z#101
-G1 X0.090000 Y0.351667
-G1 X0.090000 Y0.346667
-G1 X0.323333 Y0.113333
-G1 X0.328333 Y0.113333
-G1 X0.336667 Y0.121667
-G1 X0.336667 Y0.126667
-G1 X0.103333 Y0.360000
-G1 X0.098333 Y0.360000
-G0 Z#100
-(polygon end, distance 0.70)
-(end, total distance 17.87mm = 0.70in)
-M5 M9 M2
Index: ref/layer_copper.gcode/layer_copper.gcode.top.cnc
===================================================================
--- ref/layer_copper.gcode/layer_copper.gcode.top.cnc	(revision 28443)
+++ ref/layer_copper.gcode/layer_copper.gcode.top.cnc	(nonexistent)
@@ -1,23 +0,0 @@
-(Created by G-code exporter)
-(600 dpi)
-(Unit: inch)
-(Board size: 0.50x0.50 inches)#100=0.002000  (safe Z)
-#101=-0.000050  (cutting depth)
-(---------------------------------)
-G17 G20 G90 G64 P0.003 M3 S3000 M7 F1
-G0 Z#100
-(polygon 1)
-G0 X0.048333 Y0.435000    (start point)
-G1 Z#101
-G1 X0.040000 Y0.426667
-G1 X0.040000 Y0.146667
-G1 X0.048333 Y0.138333
-G1 X0.053333 Y0.138333
-G1 X0.061667 Y0.146667
-G1 X0.061667 Y0.426667
-G1 X0.053333 Y0.435000
-G1 X0.048333 Y0.435000
-G0 Z#100
-(polygon end, distance 0.62)
-(end, total distance 15.68mm = 0.62in)
-M5 M9 M2
Index: ref/layer_copper.gcode/layer_copper.gcode.bottom.cnc
===================================================================
--- ref/layer_copper.gcode/layer_copper.gcode.bottom.cnc	(revision 28443)
+++ ref/layer_copper.gcode/layer_copper.gcode.bottom.cnc	(nonexistent)
@@ -1,23 +0,0 @@
-(Created by G-code exporter)
-(600 dpi)
-(Unit: inch)
-(Board size: 0.50x0.50 inches)#100=0.002000  (safe Z)
-#101=-0.000050  (cutting depth)
-(---------------------------------)
-G17 G20 G90 G64 P0.003 M3 S3000 M7 F1
-G0 Z#100
-(polygon 1)
-G0 X0.096667 Y0.435000    (start point)
-G1 Z#101
-G1 X0.088333 Y0.426667
-G1 X0.088333 Y0.421667
-G1 X0.096667 Y0.413333
-G1 X0.426667 Y0.413333
-G1 X0.435000 Y0.421667
-G1 X0.435000 Y0.426667
-G1 X0.426667 Y0.435000
-G1 X0.096667 Y0.435000
-G0 Z#100
-(polygon end, distance 0.72)
-(end, total distance 18.22mm = 0.72in)
-M5 M9 M2
Index: ref/layer_copper.gcode/layer_copper.gcode.drill.cnc
===================================================================
--- ref/layer_copper.gcode/layer_copper.gcode.drill.cnc	(revision 28443)
+++ ref/layer_copper.gcode/layer_copper.gcode.drill.cnc	(nonexistent)
@@ -1,9 +0,0 @@
-(Created by G-code exporter)
-(drill file: 0 drills)
-(Unit: inch)
-(Board size: 0.50x0.50 inches)#100=0.002000  (safe Z)
-#101=-0.002000  (drill depth)
-(---------------------------------)
-G17 G20 G90 G64 P0.003 M3 S3000 M7 F1
-M5 M9 M2
-(end, total distance 0.00mm = 0.00in)
Index: ref/arc_normal.gcode/arc_normal.gcode.top.cnc
===================================================================
--- ref/arc_normal.gcode/arc_normal.gcode.top.cnc	(revision 28443)
+++ ref/arc_normal.gcode/arc_normal.gcode.top.cnc	(nonexistent)
@@ -1,110 +0,0 @@
-(Created by G-code exporter)
-(600 dpi)
-(Unit: inch)
-(Board size: 0.50x0.50 inches)#100=0.002000  (safe Z)
-#101=-0.000050  (cutting depth)
-(---------------------------------)
-G17 G20 G90 G64 P0.003 M3 S3000 M7 F1
-G0 Z#100
-(polygon 1)
-G0 X0.245000 Y0.430000    (start point)
-G1 Z#101
-G1 X0.220000 Y0.426667
-G1 X0.203333 Y0.421667
-G1 X0.190000 Y0.415000
-G1 X0.183333 Y0.406667
-G1 X0.178333 Y0.395000
-G1 X0.168333 Y0.393333
-G1 X0.158333 Y0.393333
-G1 X0.138333 Y0.388333
-G1 X0.110000 Y0.375000
-G1 X0.075000 Y0.340000
-G1 X0.061667 Y0.311667
-G1 X0.056667 Y0.291667
-G1 X0.058333 Y0.283333
-G1 X0.065000 Y0.275000
-G1 X0.068333 Y0.248333
-G1 X0.071667 Y0.235000
-G1 X0.081667 Y0.211667
-G1 X0.096667 Y0.188333
-G1 X0.115000 Y0.170000
-G1 X0.138333 Y0.155000
-G1 X0.171667 Y0.141667
-G1 X0.201667 Y0.138333
-G1 X0.210000 Y0.143333
-G1 X0.211667 Y0.150000
-G1 X0.206667 Y0.158333
-G1 X0.200000 Y0.161667
-G1 X0.175000 Y0.163333
-G1 X0.153333 Y0.171667
-G1 X0.131667 Y0.183333
-G1 X0.115000 Y0.198333
-G1 X0.103333 Y0.216667
-G1 X0.093333 Y0.238333
-G1 X0.088333 Y0.258333
-G1 X0.088333 Y0.273333
-G1 X0.098333 Y0.285000
-G1 X0.103333 Y0.303333
-G1 X0.115000 Y0.325000
-G1 X0.128333 Y0.336667
-G1 X0.143333 Y0.345000
-G1 X0.156667 Y0.350000
-G1 X0.183333 Y0.353333
-G1 X0.195000 Y0.363333
-G1 X0.210000 Y0.360000
-G1 X0.225000 Y0.363333
-G1 X0.241667 Y0.366667
-G1 X0.271667 Y0.365000
-G1 X0.290000 Y0.358333
-G1 X0.313333 Y0.345000
-G1 X0.326667 Y0.330000
-G1 X0.341667 Y0.298333
-G1 X0.351667 Y0.290000
-G1 X0.363333 Y0.285000
-G1 X0.373333 Y0.285000
-G1 X0.386667 Y0.291667
-G1 X0.393333 Y0.300000
-G1 X0.398333 Y0.311667
-G1 X0.398333 Y0.321667
-G1 X0.386667 Y0.348333
-G1 X0.371667 Y0.371667
-G1 X0.348333 Y0.395000
-G1 X0.325000 Y0.410000
-G1 X0.293333 Y0.423333
-G1 X0.271667 Y0.428333
-G1 X0.245000 Y0.430000
-G0 Z#100
-(polygon end, distance 1.31)
-(polygon 2)
-G0 X0.298333 Y0.260000    (start point)
-G1 Z#101
-G1 X0.288333 Y0.256667
-G1 X0.280000 Y0.251667
-G1 X0.278333 Y0.243333
-G1 X0.283333 Y0.235000
-G1 X0.290000 Y0.233333
-G1 X0.296667 Y0.236667
-G1 X0.306667 Y0.236667
-G1 X0.313333 Y0.230000
-G1 X0.313333 Y0.218333
-G1 X0.306667 Y0.211667
-G1 X0.295000 Y0.211667
-G1 X0.288333 Y0.218333
-G1 X0.288333 Y0.226667
-G1 X0.280000 Y0.235000
-G1 X0.273333 Y0.235000
-G1 X0.265000 Y0.226667
-G1 X0.266667 Y0.215000
-G1 X0.276667 Y0.200000
-G1 X0.291667 Y0.190000
-G1 X0.310000 Y0.190000
-G1 X0.325000 Y0.200000
-G1 X0.335000 Y0.215000
-G1 X0.335000 Y0.233333
-G1 X0.325000 Y0.248333
-G1 X0.310000 Y0.258333
-G1 X0.298333 Y0.260000
-G0 Z#100
-(polygon end, distance 0.32)
-(end, total distance 41.48mm = 1.63in)
-M5 M9 M2
Index: ref/comp1.gcode/comp1.gcode.top.cnc
===================================================================
--- ref/comp1.gcode/comp1.gcode.top.cnc	(revision 28443)
+++ ref/comp1.gcode/comp1.gcode.top.cnc	(nonexistent)
@@ -1,46 +0,0 @@
-(Created by G-code exporter)
-(600 dpi)
-(Unit: inch)
-(Board size: 0.50x0.50 inches)#100=0.002000  (safe Z)
-#101=-0.000050  (cutting depth)
-(---------------------------------)
-G17 G20 G90 G64 P0.003 M3 S3000 M7 F1
-G0 Z#100
-(polygon 1)
-G0 X0.243333 Y0.468333    (start point)
-G1 Z#101
-G1 X0.235000 Y0.465000
-G1 X0.225000 Y0.460000
-G1 X0.213333 Y0.446667
-G1 X0.208333 Y0.436667
-G1 X0.208333 Y0.411667
-G1 X0.213333 Y0.401667
-G1 X0.225000 Y0.388333
-G1 X0.238333 Y0.381667
-G1 X0.263333 Y0.381667
-G1 X0.276667 Y0.388333
-G1 X0.288333 Y0.401667
-G1 X0.293333 Y0.411667
-G1 X0.293333 Y0.436667
-G1 X0.288333 Y0.446667
-G1 X0.276667 Y0.460000
-G1 X0.263333 Y0.466667
-G1 X0.243333 Y0.468333
-G0 Z#100
-(polygon end, distance 0.28)
-(polygon 2)
-G0 X0.021667 Y0.370000    (start point)
-G1 Z#101
-G1 X0.015000 Y0.366667
-G1 X0.006667 Y0.356667
-G1 X0.006667 Y0.341667
-G1 X0.018333 Y0.330000
-G1 X0.483333 Y0.330000
-G1 X0.495000 Y0.341667
-G1 X0.495000 Y0.356667
-G1 X0.483333 Y0.368333
-G1 X0.021667 Y0.370000
-G0 Z#100
-(polygon end, distance 1.03)
-(end, total distance 33.08mm = 1.30in)
-M5 M9 M2
Index: ref/comp1.gcode/comp1.gcode.bottom.cnc
===================================================================
--- ref/comp1.gcode/comp1.gcode.bottom.cnc	(revision 28443)
+++ ref/comp1.gcode/comp1.gcode.bottom.cnc	(nonexistent)
@@ -1,38 +0,0 @@
-(Created by G-code exporter)
-(600 dpi)
-(Unit: inch)
-(Board size: 0.50x0.50 inches)#100=0.002000  (safe Z)
-#101=-0.000050  (cutting depth)
-(---------------------------------)
-G17 G20 G90 G64 P0.003 M3 S3000 M7 F1
-G0 Z#100
-(polygon 1)
-G0 X0.241667 Y0.468333    (start point)
-G1 Z#101
-G1 X0.233333 Y0.465000
-G1 X0.223333 Y0.460000
-G1 X0.211667 Y0.446667
-G1 X0.206667 Y0.436667
-G1 X0.205000 Y0.420000
-G1 X0.208333 Y0.406667
-G1 X0.216667 Y0.395000
-G1 X0.016667 Y0.393333
-G1 X0.005000 Y0.381667
-G1 X0.005000 Y0.366667
-G1 X0.016667 Y0.355000
-G1 X0.481667 Y0.355000
-G1 X0.493333 Y0.366667
-G1 X0.493333 Y0.381667
-G1 X0.481667 Y0.393333
-G1 X0.281667 Y0.395000
-G1 X0.290000 Y0.406667
-G1 X0.293333 Y0.420000
-G1 X0.291667 Y0.436667
-G1 X0.286667 Y0.446667
-G1 X0.275000 Y0.460000
-G1 X0.261667 Y0.466667
-G1 X0.241667 Y0.468333
-G0 Z#100
-(polygon end, distance 1.16)
-(end, total distance 29.56mm = 1.16in)
-M5 M9 M2
Index: ref/comp1.gcode/comp1.gcode.drill.cnc
===================================================================
--- ref/comp1.gcode/comp1.gcode.drill.cnc	(revision 28443)
+++ ref/comp1.gcode/comp1.gcode.drill.cnc	(nonexistent)
@@ -1,10 +0,0 @@
-(Created by G-code exporter)
-(drill file: 1 drills)
-(Unit: inch)
-(Board size: 0.50x0.50 inches)#100=0.002000  (safe Z)
-#101=-0.002000  (drill depth)
-(---------------------------------)
-G17 G20 G90 G64 P0.003 M3 S3000 M7 F1
-G81 X0.250000 Y0.425000 Z#101 R#100
-M5 M9 M2
-(end, total distance 0.00mm = 0.00in)
Index: ref/comp1.gcode/comp1.gcode.group-1.cnc
===================================================================
--- ref/comp1.gcode/comp1.gcode.group-1.cnc	(revision 28443)
+++ ref/comp1.gcode/comp1.gcode.group-1.cnc	(nonexistent)
@@ -1,32 +0,0 @@
-(Created by G-code exporter)
-(600 dpi)
-(Unit: inch)
-(Board size: 0.50x0.50 inches)#100=0.002000  (safe Z)
-#101=-0.000050  (cutting depth)
-(---------------------------------)
-G17 G20 G90 G64 P0.003 M3 S3000 M7 F1
-G0 Z#100
-(polygon 1)
-G0 X0.243333 Y0.468333    (start point)
-G1 Z#101
-G1 X0.235000 Y0.465000
-G1 X0.225000 Y0.460000
-G1 X0.213333 Y0.446667
-G1 X0.208333 Y0.436667
-G1 X0.208333 Y0.411667
-G1 X0.213333 Y0.401667
-G1 X0.225000 Y0.388333
-G1 X0.238333 Y0.381667
-G1 X0.263333 Y0.381667
-G1 X0.276667 Y0.388333
-G1 X0.288333 Y0.401667
-G1 X0.293333 Y0.411667
-G1 X0.293333 Y0.436667
-G1 X0.288333 Y0.446667
-G1 X0.276667 Y0.460000
-G1 X0.263333 Y0.466667
-G1 X0.243333 Y0.468333
-G0 Z#100
-(polygon end, distance 0.28)
-(end, total distance 7.00mm = 0.28in)
-M5 M9 M2
Index: ref/thermal_last.gcode/thermal_last.gcode.top.cnc
===================================================================
--- ref/thermal_last.gcode/thermal_last.gcode.top.cnc	(revision 28443)
+++ ref/thermal_last.gcode/thermal_last.gcode.top.cnc	(nonexistent)
@@ -1,31 +0,0 @@
-(Created by G-code exporter)
-(600 dpi)
-(Unit: inch)
-(Board size: 0.50x0.50 inches)#100=0.002000  (safe Z)
-#101=-0.000050  (cutting depth)
-(---------------------------------)
-G17 G20 G90 G64 P0.003 M3 S3000 M7 F1
-G0 Z#100
-(polygon 1)
-G0 X0.093333 Y0.438333    (start point)
-G1 Z#101
-G1 X0.076667 Y0.430000
-G1 X0.068333 Y0.420000
-G1 X0.061667 Y0.406667
-G1 X0.061667 Y0.391667
-G1 X0.068333 Y0.378333
-G1 X0.076667 Y0.368333
-G1 X0.093333 Y0.360000
-G1 X0.108333 Y0.360000
-G1 X0.125000 Y0.368333
-G1 X0.133333 Y0.378333
-G1 X0.140000 Y0.391667
-G1 X0.140000 Y0.406667
-G1 X0.131667 Y0.423333
-G1 X0.121667 Y0.431667
-G1 X0.108333 Y0.438333
-G1 X0.093333 Y0.438333
-G0 Z#100
-(polygon end, distance 0.25)
-(end, total distance 6.25mm = 0.25in)
-M5 M9 M2
Index: ref/thermal_last.gcode/thermal_last.gcode.bottom.cnc
===================================================================
--- ref/thermal_last.gcode/thermal_last.gcode.bottom.cnc	(revision 28443)
+++ ref/thermal_last.gcode/thermal_last.gcode.bottom.cnc	(nonexistent)
@@ -1,31 +0,0 @@
-(Created by G-code exporter)
-(600 dpi)
-(Unit: inch)
-(Board size: 0.50x0.50 inches)#100=0.002000  (safe Z)
-#101=-0.000050  (cutting depth)
-(---------------------------------)
-G17 G20 G90 G64 P0.003 M3 S3000 M7 F1
-G0 Z#100
-(polygon 1)
-G0 X0.391667 Y0.438333    (start point)
-G1 Z#101
-G1 X0.375000 Y0.430000
-G1 X0.366667 Y0.420000
-G1 X0.360000 Y0.406667
-G1 X0.360000 Y0.391667
-G1 X0.366667 Y0.378333
-G1 X0.375000 Y0.368333
-G1 X0.391667 Y0.360000
-G1 X0.406667 Y0.360000
-G1 X0.423333 Y0.368333
-G1 X0.431667 Y0.378333
-G1 X0.438333 Y0.391667
-G1 X0.438333 Y0.406667
-G1 X0.430000 Y0.423333
-G1 X0.420000 Y0.431667
-G1 X0.406667 Y0.438333
-G1 X0.391667 Y0.438333
-G0 Z#100
-(polygon end, distance 0.25)
-(end, total distance 6.25mm = 0.25in)
-M5 M9 M2
Index: ref/thermal_last.gcode/thermal_last.gcode.drill.cnc
===================================================================
--- ref/thermal_last.gcode/thermal_last.gcode.drill.cnc	(revision 28443)
+++ ref/thermal_last.gcode/thermal_last.gcode.drill.cnc	(nonexistent)
@@ -1,10 +0,0 @@
-(Created by G-code exporter)
-(drill file: 1 drills)
-(Unit: inch)
-(Board size: 0.50x0.50 inches)#100=0.002000  (safe Z)
-#101=-0.002000  (drill depth)
-(---------------------------------)
-G17 G20 G90 G64 P0.003 M3 S3000 M7 F1
-G81 X0.400000 Y0.400000 Z#101 R#100
-M5 M9 M2
-(end, total distance 0.00mm = 0.00in)
Index: ref/thermal_last.gcode/thermal_last.gcode.group-1.cnc
===================================================================
--- ref/thermal_last.gcode/thermal_last.gcode.group-1.cnc	(revision 28443)
+++ ref/thermal_last.gcode/thermal_last.gcode.group-1.cnc	(nonexistent)
@@ -1,48 +0,0 @@
-(Created by G-code exporter)
-(600 dpi)
-(Unit: inch)
-(Board size: 0.50x0.50 inches)#100=0.002000  (safe Z)
-#101=-0.000050  (cutting depth)
-(---------------------------------)
-G17 G20 G90 G64 P0.003 M3 S3000 M7 F1
-G0 Z#100
-(polygon 1)
-G0 X0.093333 Y0.438333    (start point)
-G1 Z#101
-G1 X0.076667 Y0.430000
-G1 X0.068333 Y0.420000
-G1 X0.061667 Y0.406667
-G1 X0.061667 Y0.391667
-G1 X0.070000 Y0.375000
-G1 X0.075000 Y0.371667
-G1 X0.075000 Y0.361667
-G1 X0.080000 Y0.363333
-G1 X0.101667 Y0.360000
-G1 X0.121667 Y0.363333
-G1 X0.128333 Y0.358333
-G1 X0.126667 Y0.348333
-G1 X0.115000 Y0.341667
-G1 X0.091667 Y0.340000
-G1 X0.075000 Y0.346667
-G1 X0.075000 Y0.323333
-G1 X0.176667 Y0.323333
-G1 X0.176667 Y0.425000
-G1 X0.153333 Y0.425000
-G1 X0.160000 Y0.406667
-G1 X0.160000 Y0.391667
-G1 X0.155000 Y0.376667
-G1 X0.151667 Y0.371667
-G1 X0.141667 Y0.371667
-G1 X0.138333 Y0.376667
-G1 X0.141667 Y0.400000
-G1 X0.140000 Y0.411667
-G1 X0.136667 Y0.418333
-G1 X0.140000 Y0.425000
-G1 X0.128333 Y0.425000
-G1 X0.125000 Y0.430000
-G1 X0.108333 Y0.438333
-G1 X0.093333 Y0.438333
-G0 Z#100
-(polygon end, distance 0.64)
-(end, total distance 16.28mm = 0.64in)
-M5 M9 M2
Index: ref/elem_sides_smd.gcode/elem_sides_smd.gcode.top.cnc
===================================================================
--- ref/elem_sides_smd.gcode/elem_sides_smd.gcode.top.cnc	(revision 28443)
+++ ref/elem_sides_smd.gcode/elem_sides_smd.gcode.top.cnc	(nonexistent)
@@ -1,28 +0,0 @@
-(Created by G-code exporter)
-(600 dpi)
-(Unit: inch)
-(Board size: 0.50x0.50 inches)#100=0.002000  (safe Z)
-#101=-0.000050  (cutting depth)
-(---------------------------------)
-G17 G20 G90 G64 P0.003 M3 S3000 M7 F1
-G0 Z#100
-(polygon 1)
-G0 X0.140000 Y0.411667    (start point)
-G1 Z#101
-G1 X0.140000 Y0.336667
-G1 X0.193333 Y0.336667
-G1 X0.193333 Y0.411667
-G1 X0.140000 Y0.411667
-G0 Z#100
-(polygon end, distance 0.26)
-(polygon 2)
-G0 X0.258333 Y0.411667    (start point)
-G1 Z#101
-G1 X0.258333 Y0.336667
-G1 X0.311667 Y0.336667
-G1 X0.311667 Y0.411667
-G1 X0.258333 Y0.411667
-G0 Z#100
-(polygon end, distance 0.26)
-(end, total distance 13.04mm = 0.51in)
-M5 M9 M2
Index: ref/elem_sides_smd.gcode/elem_sides_smd.gcode.bottom.cnc
===================================================================
--- ref/elem_sides_smd.gcode/elem_sides_smd.gcode.bottom.cnc	(revision 28443)
+++ ref/elem_sides_smd.gcode/elem_sides_smd.gcode.bottom.cnc	(nonexistent)
@@ -1,28 +0,0 @@
-(Created by G-code exporter)
-(600 dpi)
-(Unit: inch)
-(Board size: 0.50x0.50 inches)#100=0.002000  (safe Z)
-#101=-0.000050  (cutting depth)
-(---------------------------------)
-G17 G20 G90 G64 P0.003 M3 S3000 M7 F1
-G0 Z#100
-(polygon 1)
-G0 X0.188333 Y0.186667    (start point)
-G1 Z#101
-G1 X0.188333 Y0.111667
-G1 X0.241667 Y0.111667
-G1 X0.241667 Y0.186667
-G1 X0.188333 Y0.186667
-G0 Z#100
-(polygon end, distance 0.26)
-(polygon 2)
-G0 X0.306667 Y0.186667    (start point)
-G1 Z#101
-G1 X0.306667 Y0.111667
-G1 X0.360000 Y0.111667
-G1 X0.360000 Y0.186667
-G1 X0.306667 Y0.186667
-G0 Z#100
-(polygon end, distance 0.26)
-(end, total distance 13.04mm = 0.51in)
-M5 M9 M2
Index: ref/elem_sides_smd.gcode/elem_sides_smd.gcode.drill.cnc
===================================================================
--- ref/elem_sides_smd.gcode/elem_sides_smd.gcode.drill.cnc	(revision 28443)
+++ ref/elem_sides_smd.gcode/elem_sides_smd.gcode.drill.cnc	(nonexistent)
@@ -1,9 +0,0 @@
-(Created by G-code exporter)
-(drill file: 0 drills)
-(Unit: inch)
-(Board size: 0.50x0.50 inches)#100=0.002000  (safe Z)
-#101=-0.002000  (drill depth)
-(---------------------------------)
-G17 G20 G90 G64 P0.003 M3 S3000 M7 F1
-M5 M9 M2
-(end, total distance 0.00mm = 0.00in)
Index: ref/arc_offpage.gcode/arc_offpage.gcode.top.cnc
===================================================================
--- ref/arc_offpage.gcode/arc_offpage.gcode.top.cnc	(revision 28443)
+++ ref/arc_offpage.gcode/arc_offpage.gcode.top.cnc	(nonexistent)
@@ -1,41 +0,0 @@
-(Created by G-code exporter)
-(600 dpi)
-(Unit: inch)
-(Board size: 0.50x0.50 inches)#100=0.002000  (safe Z)
-#101=-0.000050  (cutting depth)
-(---------------------------------)
-G17 G20 G90 G64 P0.003 M3 S3000 M7 F1
-G0 Z#100
-(polygon 1)
-G0 X0.125000 Y0.500000    (start point)
-G1 Z#101
-G1 X0.125000 Y0.498333
-G1 X0.133333 Y0.480000
-G1 X0.138333 Y0.463333
-G1 X0.138333 Y0.435000
-G1 X0.133333 Y0.418333
-G1 X0.125000 Y0.400000
-G1 X0.103333 Y0.376667
-G1 X0.081667 Y0.366667
-G1 X0.065000 Y0.361667
-G1 X0.036667 Y0.361667
-G1 X0.020000 Y0.366667
-G1 X0.001667 Y0.375000
-G1 X0.000000 Y0.375000
-G1 X0.000000 Y0.351667
-G1 X0.021667 Y0.343333
-G1 X0.035000 Y0.340000
-G1 X0.065000 Y0.340000
-G1 X0.081667 Y0.343333
-G1 X0.113333 Y0.358333
-G1 X0.141667 Y0.386667
-G1 X0.156667 Y0.418333
-G1 X0.160000 Y0.435000
-G1 X0.160000 Y0.465000
-G1 X0.156667 Y0.478333
-G1 X0.148333 Y0.500000
-G1 X0.125000 Y0.500000
-G0 Z#100
-(polygon end, distance 0.57)
-(end, total distance 14.49mm = 0.57in)
-M5 M9 M2
Index: ref/padstack.gcode/padstack.gcode.bottom.cnc
===================================================================
--- ref/padstack.gcode/padstack.gcode.bottom.cnc	(revision 28443)
+++ ref/padstack.gcode/padstack.gcode.bottom.cnc	(nonexistent)
@@ -1,75 +0,0 @@
-(Created by G-code exporter)
-(600 dpi)
-(Unit: inch)
-(Board size: 0.50x0.50 inches)#100=0.002000  (safe Z)
-#101=-0.000050  (cutting depth)
-(---------------------------------)
-G17 G20 G90 G64 P0.003 M3 S3000 M7 F1
-G0 Z#100
-(polygon 1)
-G0 X0.116667 Y0.443333    (start point)
-G1 Z#101
-G1 X0.108333 Y0.440000
-G1 X0.098333 Y0.435000
-G1 X0.086667 Y0.421667
-G1 X0.081667 Y0.411667
-G1 X0.081667 Y0.386667
-G1 X0.086667 Y0.376667
-G1 X0.098333 Y0.363333
-G1 X0.111667 Y0.356667
-G1 X0.136667 Y0.356667
-G1 X0.150000 Y0.363333
-G1 X0.161667 Y0.376667
-G1 X0.166667 Y0.386667
-G1 X0.166667 Y0.411667
-G1 X0.161667 Y0.421667
-G1 X0.150000 Y0.435000
-G1 X0.136667 Y0.441667
-G1 X0.116667 Y0.443333
-G0 Z#100
-(polygon end, distance 0.28)
-(polygon 2)
-G0 X0.420000 Y0.415000    (start point)
-G1 Z#101
-G1 X0.415000 Y0.410000
-G1 X0.346667 Y0.410000
-G1 X0.338333 Y0.401667
-G1 X0.338333 Y0.396667
-G1 X0.346667 Y0.388333
-G1 X0.415000 Y0.388333
-G1 X0.420000 Y0.383333
-G1 X0.428333 Y0.383333
-G1 X0.433333 Y0.388333
-G1 X0.476667 Y0.388333
-G1 X0.485000 Y0.396667
-G1 X0.485000 Y0.401667
-G1 X0.476667 Y0.410000
-G1 X0.433333 Y0.410000
-G1 X0.428333 Y0.415000
-G1 X0.420000 Y0.415000
-G0 Z#100
-(polygon end, distance 0.33)
-(polygon 3)
-G0 X0.266667 Y0.223333    (start point)
-G1 Z#101
-G1 X0.250000 Y0.216667
-G1 X0.240000 Y0.208333
-G1 X0.230000 Y0.196667
-G1 X0.225000 Y0.178333
-G1 X0.226667 Y0.161667
-G1 X0.233333 Y0.146667
-G1 X0.246667 Y0.133333
-G1 X0.261667 Y0.126667
-G1 X0.286667 Y0.126667
-G1 X0.301667 Y0.133333
-G1 X0.315000 Y0.146667
-G1 X0.321667 Y0.161667
-G1 X0.321667 Y0.186667
-G1 X0.315000 Y0.201667
-G1 X0.301667 Y0.215000
-G1 X0.286667 Y0.221667
-G1 X0.266667 Y0.223333
-G0 Z#100
-(polygon end, distance 0.31)
-(end, total distance 23.07mm = 0.91in)
-M5 M9 M2
Index: ref/padstack.gcode/padstack.gcode.drill.cnc
===================================================================
--- ref/padstack.gcode/padstack.gcode.drill.cnc	(revision 28443)
+++ ref/padstack.gcode/padstack.gcode.drill.cnc	(nonexistent)
@@ -1,11 +0,0 @@
-(Created by G-code exporter)
-(drill file: 2 drills)
-(Unit: inch)
-(Board size: 0.50x0.50 inches)#100=0.002000  (safe Z)
-#101=-0.002000  (drill depth)
-(---------------------------------)
-G17 G20 G90 G64 P0.003 M3 S3000 M7 F1
-G81 X0.125000 Y0.400000 Z#101 R#100
-G81 X0.425000 Y0.400000 Z#101 R#100
-M5 M9 M2
-(end, total distance 7.62mm = 0.30in)
Index: ref/padstack.gcode/padstack.gcode.group-1.cnc
===================================================================
--- ref/padstack.gcode/padstack.gcode.group-1.cnc	(revision 28443)
+++ ref/padstack.gcode/padstack.gcode.group-1.cnc	(nonexistent)
@@ -1,75 +0,0 @@
-(Created by G-code exporter)
-(600 dpi)
-(Unit: inch)
-(Board size: 0.50x0.50 inches)#100=0.002000  (safe Z)
-#101=-0.000050  (cutting depth)
-(---------------------------------)
-G17 G20 G90 G64 P0.003 M3 S3000 M7 F1
-G0 Z#100
-(polygon 1)
-G0 X0.368333 Y0.443333    (start point)
-G1 Z#101
-G1 X0.360000 Y0.440000
-G1 X0.350000 Y0.435000
-G1 X0.338333 Y0.421667
-G1 X0.333333 Y0.411667
-G1 X0.333333 Y0.386667
-G1 X0.338333 Y0.376667
-G1 X0.350000 Y0.363333
-G1 X0.363333 Y0.356667
-G1 X0.388333 Y0.356667
-G1 X0.401667 Y0.363333
-G1 X0.413333 Y0.376667
-G1 X0.418333 Y0.386667
-G1 X0.418333 Y0.411667
-G1 X0.413333 Y0.421667
-G1 X0.401667 Y0.435000
-G1 X0.388333 Y0.441667
-G1 X0.368333 Y0.443333
-G0 Z#100
-(polygon end, distance 0.28)
-(polygon 2)
-G0 X0.068333 Y0.438333    (start point)
-G1 Z#101
-G1 X0.051667 Y0.430000
-G1 X0.043333 Y0.420000
-G1 X0.036667 Y0.406667
-G1 X0.036667 Y0.391667
-G1 X0.043333 Y0.378333
-G1 X0.051667 Y0.368333
-G1 X0.068333 Y0.360000
-G1 X0.083333 Y0.360000
-G1 X0.100000 Y0.368333
-G1 X0.108333 Y0.378333
-G1 X0.115000 Y0.391667
-G1 X0.115000 Y0.406667
-G1 X0.106667 Y0.423333
-G1 X0.096667 Y0.431667
-G1 X0.083333 Y0.438333
-G1 X0.068333 Y0.438333
-G0 Z#100
-(polygon end, distance 0.25)
-(polygon 3)
-G0 X0.218333 Y0.223333    (start point)
-G1 Z#101
-G1 X0.201667 Y0.216667
-G1 X0.191667 Y0.208333
-G1 X0.181667 Y0.196667
-G1 X0.176667 Y0.178333
-G1 X0.178333 Y0.161667
-G1 X0.185000 Y0.146667
-G1 X0.198333 Y0.133333
-G1 X0.213333 Y0.126667
-G1 X0.238333 Y0.126667
-G1 X0.253333 Y0.133333
-G1 X0.266667 Y0.146667
-G1 X0.273333 Y0.161667
-G1 X0.273333 Y0.186667
-G1 X0.266667 Y0.201667
-G1 X0.253333 Y0.215000
-G1 X0.238333 Y0.221667
-G1 X0.218333 Y0.223333
-G0 Z#100
-(polygon end, distance 0.31)
-(end, total distance 21.06mm = 0.83in)
-M5 M9 M2
Index: ref/padstack.gcode/padstack.gcode.top.cnc
===================================================================
--- ref/padstack.gcode/padstack.gcode.top.cnc	(revision 28443)
+++ ref/padstack.gcode/padstack.gcode.top.cnc	(nonexistent)
@@ -1,63 +0,0 @@
-(Created by G-code exporter)
-(600 dpi)
-(Unit: inch)
-(Board size: 0.50x0.50 inches)#100=0.002000  (safe Z)
-#101=-0.000050  (cutting depth)
-(---------------------------------)
-G17 G20 G90 G64 P0.003 M3 S3000 M7 F1
-G0 Z#100
-(polygon 1)
-G0 X0.025000 Y0.450000    (start point)
-G1 Z#101
-G1 X0.025000 Y0.348333
-G1 X0.126667 Y0.373333
-G1 X0.126667 Y0.450000
-G1 X0.025000 Y0.450000
-G0 Z#100
-(polygon end, distance 0.38)
-(polygon 2)
-G0 X0.368333 Y0.443333    (start point)
-G1 Z#101
-G1 X0.360000 Y0.440000
-G1 X0.350000 Y0.435000
-G1 X0.338333 Y0.421667
-G1 X0.333333 Y0.411667
-G1 X0.333333 Y0.386667
-G1 X0.338333 Y0.376667
-G1 X0.350000 Y0.363333
-G1 X0.363333 Y0.356667
-G1 X0.388333 Y0.356667
-G1 X0.401667 Y0.363333
-G1 X0.413333 Y0.376667
-G1 X0.418333 Y0.386667
-G1 X0.418333 Y0.411667
-G1 X0.413333 Y0.421667
-G1 X0.401667 Y0.435000
-G1 X0.388333 Y0.441667
-G1 X0.368333 Y0.443333
-G0 Z#100
-(polygon end, distance 0.28)
-(polygon 3)
-G0 X0.068333 Y0.220000    (start point)
-G1 Z#101
-G1 X0.056667 Y0.215000
-G1 X0.043333 Y0.206667
-G1 X0.033333 Y0.191667
-G1 X0.030000 Y0.178333
-G1 X0.031667 Y0.161667
-G1 X0.040000 Y0.145000
-G1 X0.050000 Y0.136667
-G1 X0.063333 Y0.130000
-G1 X0.088333 Y0.130000
-G1 X0.101667 Y0.136667
-G1 X0.111667 Y0.145000
-G1 X0.120000 Y0.161667
-G1 X0.120000 Y0.186667
-G1 X0.111667 Y0.203333
-G1 X0.101667 Y0.211667
-G1 X0.088333 Y0.218333
-G1 X0.068333 Y0.220000
-G0 Z#100
-(polygon end, distance 0.29)
-(end, total distance 24.05mm = 0.95in)
-M5 M9 M2
Index: ref/arc_angles.gcode/arc_angles.gcode.top.cnc
===================================================================
--- ref/arc_angles.gcode/arc_angles.gcode.top.cnc	(revision 28443)
+++ ref/arc_angles.gcode/arc_angles.gcode.top.cnc	(nonexistent)
@@ -1,72 +0,0 @@
-(Created by G-code exporter)
-(600 dpi)
-(Unit: inch)
-(Board size: 0.50x0.50 inches)#100=0.002000  (safe Z)
-#101=-0.000050  (cutting depth)
-(---------------------------------)
-G17 G20 G90 G64 P0.003 M3 S3000 M7 F1
-G0 Z#100
-(polygon 1)
-G0 X0.298333 Y0.460000    (start point)
-G1 Z#101
-G1 X0.283333 Y0.456667
-G1 X0.266667 Y0.448333
-G1 X0.251667 Y0.433333
-G1 X0.241667 Y0.411667
-G1 X0.241667 Y0.386667
-G1 X0.251667 Y0.365000
-G1 X0.266667 Y0.350000
-G1 X0.288333 Y0.340000
-G1 X0.313333 Y0.340000
-G1 X0.335000 Y0.350000
-G1 X0.350000 Y0.365000
-G1 X0.358333 Y0.381667
-G1 X0.361667 Y0.395000
-G1 X0.365000 Y0.411667
-G1 X0.370000 Y0.425000
-G1 X0.365000 Y0.433333
-G1 X0.358333 Y0.435000
-G1 X0.351667 Y0.431667
-G1 X0.335000 Y0.448333
-G1 X0.313333 Y0.458333
-G1 X0.298333 Y0.460000
-G0 Z#100
-(polygon end, distance 0.39)
-(polygon 2)
-G0 X0.291667 Y0.436667    (start point)
-G1 Z#101
-G1 X0.281667 Y0.433333
-G1 X0.266667 Y0.418333
-G1 X0.263333 Y0.405000
-G1 X0.263333 Y0.393333
-G1 X0.266667 Y0.380000
-G1 X0.281667 Y0.365000
-G1 X0.295000 Y0.361667
-G1 X0.306667 Y0.361667
-G1 X0.320000 Y0.365000
-G1 X0.335000 Y0.380000
-G1 X0.338333 Y0.393333
-G1 X0.338333 Y0.405000
-G1 X0.335000 Y0.418333
-G1 X0.320000 Y0.433333
-G1 X0.306667 Y0.436667
-G1 X0.291667 Y0.436667
-G0 Z#100
-(polygon end, distance 0.24)
-(polygon 3)
-G0 X0.048333 Y0.410000    (start point)
-G1 Z#101
-G1 X0.040000 Y0.401667
-G1 X0.041667 Y0.386667
-G1 X0.050000 Y0.368333
-G1 X0.058333 Y0.363333
-G1 X0.065000 Y0.365000
-G1 X0.070000 Y0.373333
-G1 X0.063333 Y0.391667
-G1 X0.063333 Y0.401667
-G1 X0.055000 Y0.410000
-G1 X0.048333 Y0.410000
-G0 Z#100
-(polygon end, distance 0.12)
-(end, total distance 19.21mm = 0.76in)
-M5 M9 M2
Index: ref/line_offpage.gcode/line_offpage.gcode.top.cnc
===================================================================
--- ref/line_offpage.gcode/line_offpage.gcode.top.cnc	(revision 28443)
+++ ref/line_offpage.gcode/line_offpage.gcode.top.cnc	(nonexistent)
@@ -1,21 +0,0 @@
-(Created by G-code exporter)
-(600 dpi)
-(Unit: inch)
-(Board size: 0.50x0.50 inches)#100=0.002000  (safe Z)
-#101=-0.000050  (cutting depth)
-(---------------------------------)
-G17 G20 G90 G64 P0.003 M3 S3000 M7 F1
-G0 Z#100
-(polygon 1)
-G0 X0.098333 Y0.310000    (start point)
-G1 Z#101
-G1 X0.090000 Y0.301667
-G1 X0.090000 Y0.296667
-G1 X0.098333 Y0.288333
-G1 X0.500000 Y0.288333
-G1 X0.500000 Y0.310000
-G1 X0.098333 Y0.310000
-G0 Z#100
-(polygon end, distance 0.85)
-(end, total distance 21.68mm = 0.85in)
-M5 M9 M2
Index: ref/poly_hole.gcode/poly_hole.gcode.top.cnc
===================================================================
--- ref/poly_hole.gcode/poly_hole.gcode.top.cnc	(revision 28443)
+++ ref/poly_hole.gcode/poly_hole.gcode.top.cnc	(nonexistent)
@@ -1,98 +0,0 @@
-(Created by G-code exporter)
-(600 dpi)
-(Unit: inch)
-(Board size: 0.50x0.50 inches)#100=0.002000  (safe Z)
-#101=-0.000050  (cutting depth)
-(---------------------------------)
-G17 G20 G90 G64 P0.003 M3 S3000 M7 F1
-G0 Z#100
-(polygon 1)
-G0 X0.025000 Y0.475000    (start point)
-G1 Z#101
-G1 X0.025000 Y0.373333
-G1 X0.065000 Y0.411667
-G1 X0.126667 Y0.475000
-G1 X0.025000 Y0.475000
-G0 Z#100
-(polygon end, distance 0.35)
-(polygon 2)
-G0 X0.051667 Y0.450000    (start point)
-G1 Z#101
-G1 X0.051667 Y0.426667
-G1 X0.061667 Y0.433333
-G1 X0.070000 Y0.443333
-G1 X0.075000 Y0.450000
-G1 X0.051667 Y0.450000
-G0 Z#100
-(polygon end, distance 0.08)
-(polygon 3)
-G0 X0.150000 Y0.475000    (start point)
-G1 Z#101
-G1 X0.025000 Y0.348333
-G1 X0.151667 Y0.348333
-G1 X0.151667 Y0.475000
-G1 X0.150000 Y0.475000
-G0 Z#100
-(polygon end, distance 0.43)
-(polygon 4)
-G0 X0.101667 Y0.400000    (start point)
-G1 Z#101
-G1 X0.078333 Y0.375000
-G1 X0.125000 Y0.375000
-G1 X0.125000 Y0.400000
-G1 X0.101667 Y0.400000
-G0 Z#100
-(polygon end, distance 0.13)
-(polygon 5)
-G0 X0.300000 Y0.475000    (start point)
-G1 Z#101
-G1 X0.175000 Y0.348333
-G1 X0.426667 Y0.348333
-G1 X0.301667 Y0.475000
-G1 X0.300000 Y0.475000
-G0 Z#100
-(polygon end, distance 0.61)
-(polygon 6)
-G0 X0.276667 Y0.425000    (start point)
-G1 Z#101
-G1 X0.276667 Y0.375000
-G1 X0.325000 Y0.375000
-G1 X0.325000 Y0.425000
-G1 X0.276667 Y0.425000
-G0 Z#100
-(polygon end, distance 0.20)
-(polygon 7)
-G0 X0.025000 Y0.325000    (start point)
-G1 Z#101
-G1 X0.025000 Y0.323333
-G1 X0.050000 Y0.150000
-G1 X0.051667 Y0.148333
-G1 X0.296667 Y0.296667
-G1 X0.301667 Y0.300000
-G1 X0.171667 Y0.310000
-G1 X0.110000 Y0.316667
-G1 X0.025000 Y0.325000
-G0 Z#100
-(polygon end, distance 0.75)
-(polygon 8)
-G0 X0.076667 Y0.275000    (start point)
-G1 Z#101
-G1 X0.076667 Y0.223333
-G1 X0.101667 Y0.200000
-G1 X0.125000 Y0.225000
-G1 X0.125000 Y0.250000
-G1 X0.098333 Y0.275000
-G1 X0.076667 Y0.275000
-G0 Z#100
-(polygon end, distance 0.20)
-(polygon 9)
-G0 X0.151667 Y0.275000    (start point)
-G1 Z#101
-G1 X0.151667 Y0.250000
-G1 X0.175000 Y0.250000
-G1 X0.175000 Y0.275000
-G1 X0.151667 Y0.275000
-G0 Z#100
-(polygon end, distance 0.10)
-(end, total distance 72.25mm = 2.84in)
-M5 M9 M2
Index: ref/thermal_layer.gcode/thermal_layer.gcode.drill.cnc
===================================================================
--- ref/thermal_layer.gcode/thermal_layer.gcode.drill.cnc	(revision 28443)
+++ ref/thermal_layer.gcode/thermal_layer.gcode.drill.cnc	(nonexistent)
@@ -1,13 +0,0 @@
-(Created by G-code exporter)
-(drill file: 4 drills)
-(Unit: inch)
-(Board size: 0.50x0.50 inches)#100=0.002000  (safe Z)
-#101=-0.002000  (drill depth)
-(---------------------------------)
-G17 G20 G90 G64 P0.003 M3 S3000 M7 F1
-G81 X0.225000 Y0.225000 Z#101 R#100
-G81 X0.225000 Y0.400000 Z#101 R#100
-G81 X0.400000 Y0.400000 Z#101 R#100
-G81 X0.400000 Y0.225000 Z#101 R#100
-M5 M9 M2
-(end, total distance 13.33mm = 0.53in)
Index: ref/thermal_layer.gcode/thermal_layer.gcode.group-1.cnc
===================================================================
--- ref/thermal_layer.gcode/thermal_layer.gcode.group-1.cnc	(revision 28443)
+++ ref/thermal_layer.gcode/thermal_layer.gcode.group-1.cnc	(nonexistent)
@@ -1,94 +0,0 @@
-(Created by G-code exporter)
-(600 dpi)
-(Unit: inch)
-(Board size: 0.50x0.50 inches)#100=0.002000  (safe Z)
-#101=-0.000050  (cutting depth)
-(---------------------------------)
-G17 G20 G90 G64 P0.003 M3 S3000 M7 F1
-G0 Z#100
-(polygon 1)
-G0 X0.093333 Y0.438333    (start point)
-G1 Z#101
-G1 X0.076667 Y0.430000
-G1 X0.068333 Y0.420000
-G1 X0.061667 Y0.406667
-G1 X0.061667 Y0.391667
-G1 X0.068333 Y0.378333
-G1 X0.076667 Y0.368333
-G1 X0.093333 Y0.360000
-G1 X0.108333 Y0.360000
-G1 X0.125000 Y0.368333
-G1 X0.133333 Y0.378333
-G1 X0.140000 Y0.391667
-G1 X0.140000 Y0.406667
-G1 X0.131667 Y0.423333
-G1 X0.121667 Y0.431667
-G1 X0.108333 Y0.438333
-G1 X0.093333 Y0.438333
-G0 Z#100
-(polygon end, distance 0.25)
-(polygon 2)
-G0 X0.268333 Y0.438333    (start point)
-G1 Z#101
-G1 X0.251667 Y0.430000
-G1 X0.243333 Y0.420000
-G1 X0.236667 Y0.406667
-G1 X0.236667 Y0.391667
-G1 X0.243333 Y0.378333
-G1 X0.251667 Y0.368333
-G1 X0.268333 Y0.360000
-G1 X0.283333 Y0.360000
-G1 X0.300000 Y0.368333
-G1 X0.308333 Y0.378333
-G1 X0.315000 Y0.391667
-G1 X0.315000 Y0.406667
-G1 X0.306667 Y0.423333
-G1 X0.296667 Y0.431667
-G1 X0.283333 Y0.438333
-G1 X0.268333 Y0.438333
-G0 Z#100
-(polygon end, distance 0.25)
-(polygon 3)
-G0 X0.093333 Y0.263333    (start point)
-G1 Z#101
-G1 X0.076667 Y0.255000
-G1 X0.068333 Y0.245000
-G1 X0.061667 Y0.231667
-G1 X0.061667 Y0.216667
-G1 X0.068333 Y0.203333
-G1 X0.076667 Y0.193333
-G1 X0.093333 Y0.185000
-G1 X0.108333 Y0.185000
-G1 X0.125000 Y0.193333
-G1 X0.133333 Y0.203333
-G1 X0.140000 Y0.216667
-G1 X0.140000 Y0.231667
-G1 X0.131667 Y0.248333
-G1 X0.121667 Y0.256667
-G1 X0.108333 Y0.263333
-G1 X0.093333 Y0.263333
-G0 Z#100
-(polygon end, distance 0.25)
-(polygon 4)
-G0 X0.268333 Y0.263333    (start point)
-G1 Z#101
-G1 X0.251667 Y0.255000
-G1 X0.243333 Y0.245000
-G1 X0.236667 Y0.231667
-G1 X0.236667 Y0.216667
-G1 X0.243333 Y0.203333
-G1 X0.251667 Y0.193333
-G1 X0.268333 Y0.185000
-G1 X0.283333 Y0.185000
-G1 X0.300000 Y0.193333
-G1 X0.308333 Y0.203333
-G1 X0.315000 Y0.216667
-G1 X0.315000 Y0.231667
-G1 X0.306667 Y0.248333
-G1 X0.296667 Y0.256667
-G1 X0.283333 Y0.263333
-G1 X0.268333 Y0.263333
-G0 Z#100
-(polygon end, distance 0.25)
-(end, total distance 25.02mm = 0.98in)
-M5 M9 M2
Index: ref/thermal_layer.gcode/thermal_layer.gcode.top.cnc
===================================================================
--- ref/thermal_layer.gcode/thermal_layer.gcode.top.cnc	(revision 28443)
+++ ref/thermal_layer.gcode/thermal_layer.gcode.top.cnc	(nonexistent)
@@ -1,178 +0,0 @@
-(Created by G-code exporter)
-(600 dpi)
-(Unit: inch)
-(Board size: 0.50x0.50 inches)#100=0.002000  (safe Z)
-#101=-0.000050  (cutting depth)
-(---------------------------------)
-G17 G20 G90 G64 P0.003 M3 S3000 M7 F1
-G0 Z#100
-(polygon 1)
-G0 X0.025000 Y0.475000    (start point)
-G1 Z#101
-G1 X0.025000 Y0.373333
-G1 X0.048333 Y0.373333
-G1 X0.041667 Y0.393333
-G1 X0.041667 Y0.405000
-G1 X0.046667 Y0.421667
-G1 X0.051667 Y0.428333
-G1 X0.058333 Y0.428333
-G1 X0.063333 Y0.421667
-G1 X0.060000 Y0.396667
-G1 X0.065000 Y0.380000
-G1 X0.061667 Y0.373333
-G1 X0.073333 Y0.373333
-G1 X0.076667 Y0.368333
-G1 X0.093333 Y0.360000
-G1 X0.108333 Y0.360000
-G1 X0.125000 Y0.368333
-G1 X0.133333 Y0.378333
-G1 X0.140000 Y0.391667
-G1 X0.140000 Y0.406667
-G1 X0.131667 Y0.423333
-G1 X0.126667 Y0.426667
-G1 X0.126667 Y0.438333
-G1 X0.120000 Y0.436667
-G1 X0.098333 Y0.440000
-G1 X0.081667 Y0.435000
-G1 X0.075000 Y0.440000
-G1 X0.073333 Y0.450000
-G1 X0.080000 Y0.455000
-G1 X0.101667 Y0.460000
-G1 X0.120000 Y0.455000
-G1 X0.126667 Y0.453333
-G1 X0.126667 Y0.475000
-G1 X0.025000 Y0.475000
-G0 Z#100
-(polygon end, distance 0.64)
-(polygon 2)
-G0 X0.200000 Y0.475000    (start point)
-G1 Z#101
-G1 X0.200000 Y0.373333
-G1 X0.223333 Y0.373333
-G1 X0.216667 Y0.393333
-G1 X0.216667 Y0.405000
-G1 X0.221667 Y0.421667
-G1 X0.226667 Y0.428333
-G1 X0.233333 Y0.428333
-G1 X0.238333 Y0.421667
-G1 X0.235000 Y0.396667
-G1 X0.240000 Y0.380000
-G1 X0.236667 Y0.375000
-G1 X0.248333 Y0.371667
-G1 X0.250000 Y0.361667
-G1 X0.253333 Y0.361667
-G1 X0.255000 Y0.365000
-G1 X0.261667 Y0.361667
-G1 X0.290000 Y0.361667
-G1 X0.296667 Y0.365000
-G1 X0.310000 Y0.350000
-G1 X0.291667 Y0.341667
-G1 X0.260000 Y0.341667
-G1 X0.250000 Y0.346667
-G1 X0.250000 Y0.323333
-G1 X0.351667 Y0.323333
-G1 X0.351667 Y0.425000
-G1 X0.328333 Y0.425000
-G1 X0.331667 Y0.418333
-G1 X0.335000 Y0.398333
-G1 X0.331667 Y0.380000
-G1 X0.325000 Y0.365000
-G1 X0.310000 Y0.378333
-G1 X0.315000 Y0.386667
-G1 X0.315000 Y0.411667
-G1 X0.310000 Y0.420000
-G1 X0.315000 Y0.423333
-G1 X0.303333 Y0.426667
-G1 X0.301667 Y0.438333
-G1 X0.295000 Y0.436667
-G1 X0.273333 Y0.440000
-G1 X0.256667 Y0.435000
-G1 X0.250000 Y0.440000
-G1 X0.248333 Y0.450000
-G1 X0.255000 Y0.455000
-G1 X0.276667 Y0.460000
-G1 X0.295000 Y0.455000
-G1 X0.301667 Y0.453333
-G1 X0.301667 Y0.475000
-G1 X0.200000 Y0.475000
-G0 Z#100
-(polygon end, distance 1.05)
-(polygon 3)
-G0 X0.025000 Y0.300000    (start point)
-G1 Z#101
-G1 X0.025000 Y0.198333
-G1 X0.048333 Y0.198333
-G1 X0.048333 Y0.200000
-G1 X0.045000 Y0.206667
-G1 X0.041667 Y0.223333
-G1 X0.045000 Y0.243333
-G1 X0.053333 Y0.260000
-G1 X0.070000 Y0.275000
-G1 X0.085000 Y0.281667
-G1 X0.106667 Y0.283333
-G1 X0.120000 Y0.280000
-G1 X0.126667 Y0.278333
-G1 X0.126667 Y0.300000
-G1 X0.025000 Y0.300000
-G0 Z#100
-(polygon end, distance 0.39)
-(polygon 4)
-G0 X0.200000 Y0.300000    (start point)
-G1 Z#101
-G1 X0.200000 Y0.198333
-G1 X0.223333 Y0.198333
-G1 X0.223333 Y0.200000
-G1 X0.220000 Y0.206667
-G1 X0.216667 Y0.223333
-G1 X0.220000 Y0.243333
-G1 X0.228333 Y0.260000
-G1 X0.245000 Y0.275000
-G1 X0.260000 Y0.281667
-G1 X0.281667 Y0.283333
-G1 X0.295000 Y0.280000
-G1 X0.301667 Y0.278333
-G1 X0.301667 Y0.300000
-G1 X0.200000 Y0.300000
-G0 Z#100
-(polygon end, distance 0.39)
-(polygon 5)
-G0 X0.093333 Y0.263333    (start point)
-G1 Z#101
-G1 X0.076667 Y0.255000
-G1 X0.068333 Y0.245000
-G1 X0.061667 Y0.231667
-G1 X0.061667 Y0.216667
-G1 X0.068333 Y0.203333
-G1 X0.076667 Y0.193333
-G1 X0.093333 Y0.185000
-G1 X0.108333 Y0.185000
-G1 X0.125000 Y0.193333
-G1 X0.133333 Y0.203333
-G1 X0.140000 Y0.216667
-G1 X0.140000 Y0.231667
-G1 X0.131667 Y0.248333
-G1 X0.121667 Y0.256667
-G1 X0.108333 Y0.263333
-G1 X0.093333 Y0.263333
-G0 Z#100
-(polygon end, distance 0.25)
-(polygon 6)
-G0 X0.268333 Y0.263333    (start point)
-G1 Z#101
-G1 X0.251667 Y0.255000
-G1 X0.243333 Y0.245000
-G1 X0.236667 Y0.231667
-G1 X0.236667 Y0.216667
-G1 X0.245000 Y0.200000
-G1 X0.250000 Y0.196667
-G1 X0.250000 Y0.148333
-G1 X0.351667 Y0.148333
-G1 X0.351667 Y0.250000
-G1 X0.303333 Y0.250000
-G1 X0.300000 Y0.255000
-G1 X0.283333 Y0.263333
-G1 X0.268333 Y0.263333
-G0 Z#100
-(polygon end, distance 0.43)
-(end, total distance 80.21mm = 3.16in)
-M5 M9 M2
Index: ref/thermal_layer.gcode/thermal_layer.gcode.bottom.cnc
===================================================================
--- ref/thermal_layer.gcode/thermal_layer.gcode.bottom.cnc	(revision 28443)
+++ ref/thermal_layer.gcode/thermal_layer.gcode.bottom.cnc	(nonexistent)
@@ -1,108 +0,0 @@
-(Created by G-code exporter)
-(600 dpi)
-(Unit: inch)
-(Board size: 0.50x0.50 inches)#100=0.002000  (safe Z)
-#101=-0.000050  (cutting depth)
-(---------------------------------)
-G17 G20 G90 G64 P0.003 M3 S3000 M7 F1
-G0 Z#100
-(polygon 1)
-G0 X0.216667 Y0.438333    (start point)
-G1 Z#101
-G1 X0.200000 Y0.430000
-G1 X0.191667 Y0.420000
-G1 X0.185000 Y0.406667
-G1 X0.185000 Y0.391667
-G1 X0.191667 Y0.378333
-G1 X0.200000 Y0.368333
-G1 X0.216667 Y0.360000
-G1 X0.231667 Y0.360000
-G1 X0.248333 Y0.368333
-G1 X0.256667 Y0.378333
-G1 X0.263333 Y0.391667
-G1 X0.263333 Y0.406667
-G1 X0.255000 Y0.423333
-G1 X0.245000 Y0.431667
-G1 X0.231667 Y0.438333
-G1 X0.216667 Y0.438333
-G0 Z#100
-(polygon end, distance 0.25)
-(polygon 2)
-G0 X0.391667 Y0.438333    (start point)
-G1 Z#101
-G1 X0.375000 Y0.430000
-G1 X0.371667 Y0.425000
-G1 X0.360000 Y0.425000
-G1 X0.365000 Y0.420000
-G1 X0.360000 Y0.411667
-G1 X0.360000 Y0.386667
-G1 X0.365000 Y0.378333
-G1 X0.350000 Y0.365000
-G1 X0.343333 Y0.380000
-G1 X0.340000 Y0.400000
-G1 X0.343333 Y0.418333
-G1 X0.346667 Y0.425000
-G1 X0.323333 Y0.425000
-G1 X0.323333 Y0.323333
-G1 X0.425000 Y0.323333
-G1 X0.425000 Y0.346667
-G1 X0.415000 Y0.341667
-G1 X0.383333 Y0.341667
-G1 X0.365000 Y0.350000
-G1 X0.378333 Y0.365000
-G1 X0.385000 Y0.361667
-G1 X0.413333 Y0.361667
-G1 X0.420000 Y0.365000
-G1 X0.421667 Y0.361667
-G1 X0.425000 Y0.361667
-G1 X0.425000 Y0.371667
-G1 X0.430000 Y0.375000
-G1 X0.438333 Y0.391667
-G1 X0.438333 Y0.406667
-G1 X0.430000 Y0.423333
-G1 X0.420000 Y0.431667
-G1 X0.406667 Y0.438333
-G1 X0.391667 Y0.438333
-G0 Z#100
-(polygon end, distance 0.67)
-(polygon 3)
-G0 X0.216667 Y0.263333    (start point)
-G1 Z#101
-G1 X0.200000 Y0.255000
-G1 X0.191667 Y0.245000
-G1 X0.185000 Y0.231667
-G1 X0.185000 Y0.216667
-G1 X0.191667 Y0.203333
-G1 X0.200000 Y0.193333
-G1 X0.216667 Y0.185000
-G1 X0.231667 Y0.185000
-G1 X0.248333 Y0.193333
-G1 X0.256667 Y0.203333
-G1 X0.263333 Y0.216667
-G1 X0.263333 Y0.231667
-G1 X0.255000 Y0.248333
-G1 X0.245000 Y0.256667
-G1 X0.231667 Y0.263333
-G1 X0.216667 Y0.263333
-G0 Z#100
-(polygon end, distance 0.25)
-(polygon 4)
-G0 X0.391667 Y0.263333    (start point)
-G1 Z#101
-G1 X0.375000 Y0.255000
-G1 X0.371667 Y0.250000
-G1 X0.323333 Y0.250000
-G1 X0.323333 Y0.148333
-G1 X0.425000 Y0.148333
-G1 X0.425000 Y0.196667
-G1 X0.430000 Y0.200000
-G1 X0.438333 Y0.216667
-G1 X0.438333 Y0.231667
-G1 X0.430000 Y0.248333
-G1 X0.420000 Y0.256667
-G1 X0.406667 Y0.263333
-G1 X0.391667 Y0.263333
-G0 Z#100
-(polygon end, distance 0.43)
-(end, total distance 40.22mm = 1.58in)
-M5 M9 M2
Index: ref/line_overlap1.gcode/line_overlap1.gcode.top.cnc
===================================================================
--- ref/line_overlap1.gcode/line_overlap1.gcode.top.cnc	(revision 28443)
+++ ref/line_overlap1.gcode/line_overlap1.gcode.top.cnc	(nonexistent)
@@ -1,23 +0,0 @@
-(Created by G-code exporter)
-(600 dpi)
-(Unit: inch)
-(Board size: 0.50x0.50 inches)#100=0.002000  (safe Z)
-#101=-0.000050  (cutting depth)
-(---------------------------------)
-G17 G20 G90 G64 P0.003 M3 S3000 M7 F1
-G0 Z#100
-(polygon 1)
-G0 X0.196667 Y0.315000    (start point)
-G1 Z#101
-G1 X0.185000 Y0.303333
-G1 X0.185000 Y0.295000
-G1 X0.196667 Y0.283333
-G1 X0.305000 Y0.283333
-G1 X0.316667 Y0.295000
-G1 X0.316667 Y0.303333
-G1 X0.305000 Y0.315000
-G1 X0.196667 Y0.315000
-G0 Z#100
-(polygon end, distance 0.30)
-(end, total distance 7.60mm = 0.30in)
-M5 M9 M2
Index: ref/arc_sizes.gcode/arc_sizes.gcode.top.cnc
===================================================================
--- ref/arc_sizes.gcode/arc_sizes.gcode.top.cnc	(revision 28443)
+++ ref/arc_sizes.gcode/arc_sizes.gcode.top.cnc	(nonexistent)
@@ -1,49 +0,0 @@
-(Created by G-code exporter)
-(600 dpi)
-(Unit: inch)
-(Board size: 0.50x0.50 inches)#100=0.002000  (safe Z)
-#101=-0.000050  (cutting depth)
-(---------------------------------)
-G17 G20 G90 G64 P0.003 M3 S3000 M7 F1
-G0 Z#100
-(polygon 1)
-G0 X0.098333 Y0.310000    (start point)
-G1 Z#101
-G1 X0.090000 Y0.301667
-G1 X0.090000 Y0.246667
-G1 X0.098333 Y0.238333
-G1 X0.103333 Y0.238333
-G1 X0.111667 Y0.246667
-G1 X0.111667 Y0.301667
-G1 X0.103333 Y0.310000
-G1 X0.098333 Y0.310000
-G0 Z#100
-(polygon end, distance 0.17)
-(polygon 2)
-G0 X0.148333 Y0.310000    (start point)
-G1 Z#101
-G1 X0.140000 Y0.301667
-G1 X0.140000 Y0.296667
-G1 X0.148333 Y0.288333
-G1 X0.203333 Y0.288333
-G1 X0.211667 Y0.296667
-G1 X0.211667 Y0.301667
-G1 X0.203333 Y0.310000
-G1 X0.148333 Y0.310000
-G0 Z#100
-(polygon end, distance 0.17)
-(polygon 3)
-G0 X0.298333 Y0.310000    (start point)
-G1 Z#101
-G1 X0.290000 Y0.301667
-G1 X0.290000 Y0.296667
-G1 X0.298333 Y0.288333
-G1 X0.303333 Y0.288333
-G1 X0.311667 Y0.296667
-G1 X0.311667 Y0.301667
-G1 X0.303333 Y0.310000
-G1 X0.298333 Y0.310000
-G0 Z#100
-(polygon end, distance 0.07)
-(end, total distance 10.20mm = 0.40in)
-M5 M9 M2
Index: ref/coord_rounding.gcode/coord_rounding.gcode.top.cnc
===================================================================
--- ref/coord_rounding.gcode/coord_rounding.gcode.top.cnc	(revision 28443)
+++ ref/coord_rounding.gcode/coord_rounding.gcode.top.cnc	(nonexistent)
@@ -1,31 +0,0 @@
-(Created by G-code exporter)
-(600 dpi)
-(Unit: inch)
-(Board size: 0.50x0.50 inches)#100=0.002000  (safe Z)
-#101=-0.000050  (cutting depth)
-(---------------------------------)
-G17 G20 G90 G64 P0.003 M3 S3000 M7 F1
-G0 Z#100
-(polygon 1)
-G0 X0.230000 Y0.300000    (start point)
-G1 Z#101
-G1 X0.220000 Y0.296667
-G1 X0.200000 Y0.276667
-G1 X0.196667 Y0.263333
-G1 X0.196667 Y0.255000
-G1 X0.200000 Y0.241667
-G1 X0.220000 Y0.221667
-G1 X0.233333 Y0.218333
-G1 X0.245000 Y0.218333
-G1 X0.258333 Y0.221667
-G1 X0.278333 Y0.241667
-G1 X0.281667 Y0.255000
-G1 X0.281667 Y0.263333
-G1 X0.278333 Y0.276667
-G1 X0.258333 Y0.296667
-G1 X0.245000 Y0.300000
-G1 X0.230000 Y0.300000
-G0 Z#100
-(polygon end, distance 0.26)
-(end, total distance 6.69mm = 0.26in)
-M5 M9 M2
Index: ref/line_overlap2.gcode/line_overlap2.gcode.top.cnc
===================================================================
--- ref/line_overlap2.gcode/line_overlap2.gcode.top.cnc	(revision 28443)
+++ ref/line_overlap2.gcode/line_overlap2.gcode.top.cnc	(nonexistent)
@@ -1,23 +0,0 @@
-(Created by G-code exporter)
-(600 dpi)
-(Unit: inch)
-(Board size: 0.50x0.50 inches)#100=0.002000  (safe Z)
-#101=-0.000050  (cutting depth)
-(---------------------------------)
-G17 G20 G90 G64 P0.003 M3 S3000 M7 F1
-G0 Z#100
-(polygon 1)
-G0 X0.196667 Y0.315000    (start point)
-G1 Z#101
-G1 X0.185000 Y0.303333
-G1 X0.185000 Y0.295000
-G1 X0.196667 Y0.283333
-G1 X0.355000 Y0.283333
-G1 X0.366667 Y0.295000
-G1 X0.366667 Y0.303333
-G1 X0.355000 Y0.315000
-G1 X0.196667 Y0.315000
-G0 Z#100
-(polygon end, distance 0.40)
-(end, total distance 10.14mm = 0.40in)
-M5 M9 M2
Index: ref/netlist_ba.gcode/netlist_ba.gcode.group-1.cnc
===================================================================
--- ref/netlist_ba.gcode/netlist_ba.gcode.group-1.cnc	(revision 28443)
+++ ref/netlist_ba.gcode/netlist_ba.gcode.group-1.cnc	(nonexistent)
@@ -1,82 +0,0 @@
-(Created by G-code exporter)
-(600 dpi)
-(Unit: inch)
-(Board size: 0.50x0.50 inches)#100=0.002000  (safe Z)
-#101=-0.000050  (cutting depth)
-(---------------------------------)
-G17 G20 G90 G64 P0.003 M3 S3000 M7 F1
-G0 Z#100
-(polygon 1)
-G0 X0.060000 Y0.365000    (start point)
-G1 Z#101
-G1 X0.060000 Y0.283333
-G1 X0.141667 Y0.283333
-G1 X0.141667 Y0.365000
-G1 X0.060000 Y0.365000
-G0 Z#100
-(polygon end, distance 0.33)
-(polygon 2)
-G0 X0.393333 Y0.365000    (start point)
-G1 Z#101
-G1 X0.383333 Y0.361667
-G1 X0.363333 Y0.341667
-G1 X0.360000 Y0.328333
-G1 X0.360000 Y0.320000
-G1 X0.363333 Y0.306667
-G1 X0.383333 Y0.286667
-G1 X0.396667 Y0.283333
-G1 X0.405000 Y0.283333
-G1 X0.418333 Y0.286667
-G1 X0.438333 Y0.306667
-G1 X0.441667 Y0.320000
-G1 X0.441667 Y0.328333
-G1 X0.438333 Y0.341667
-G1 X0.418333 Y0.361667
-G1 X0.405000 Y0.365000
-G1 X0.393333 Y0.365000
-G0 Z#100
-(polygon end, distance 0.26)
-(polygon 3)
-G0 X0.093333 Y0.265000    (start point)
-G1 Z#101
-G1 X0.083333 Y0.261667
-G1 X0.063333 Y0.241667
-G1 X0.060000 Y0.228333
-G1 X0.060000 Y0.220000
-G1 X0.063333 Y0.206667
-G1 X0.083333 Y0.186667
-G1 X0.096667 Y0.183333
-G1 X0.105000 Y0.183333
-G1 X0.118333 Y0.186667
-G1 X0.138333 Y0.206667
-G1 X0.141667 Y0.220000
-G1 X0.141667 Y0.228333
-G1 X0.138333 Y0.241667
-G1 X0.118333 Y0.261667
-G1 X0.105000 Y0.265000
-G1 X0.093333 Y0.265000
-G0 Z#100
-(polygon end, distance 0.26)
-(polygon 4)
-G0 X0.393333 Y0.265000    (start point)
-G1 Z#101
-G1 X0.383333 Y0.261667
-G1 X0.363333 Y0.241667
-G1 X0.360000 Y0.228333
-G1 X0.360000 Y0.220000
-G1 X0.363333 Y0.206667
-G1 X0.383333 Y0.186667
-G1 X0.396667 Y0.183333
-G1 X0.405000 Y0.183333
-G1 X0.418333 Y0.186667
-G1 X0.438333 Y0.206667
-G1 X0.441667 Y0.220000
-G1 X0.441667 Y0.228333
-G1 X0.438333 Y0.241667
-G1 X0.418333 Y0.261667
-G1 X0.405000 Y0.265000
-G1 X0.393333 Y0.265000
-G0 Z#100
-(polygon end, distance 0.26)
-(end, total distance 27.85mm = 1.10in)
-M5 M9 M2
Index: ref/netlist_ba.gcode/netlist_ba.gcode.top.cnc
===================================================================
--- ref/netlist_ba.gcode/netlist_ba.gcode.top.cnc	(revision 28443)
+++ ref/netlist_ba.gcode/netlist_ba.gcode.top.cnc	(nonexistent)
@@ -1,82 +0,0 @@
-(Created by G-code exporter)
-(600 dpi)
-(Unit: inch)
-(Board size: 0.50x0.50 inches)#100=0.002000  (safe Z)
-#101=-0.000050  (cutting depth)
-(---------------------------------)
-G17 G20 G90 G64 P0.003 M3 S3000 M7 F1
-G0 Z#100
-(polygon 1)
-G0 X0.060000 Y0.365000    (start point)
-G1 Z#101
-G1 X0.060000 Y0.283333
-G1 X0.141667 Y0.283333
-G1 X0.141667 Y0.365000
-G1 X0.060000 Y0.365000
-G0 Z#100
-(polygon end, distance 0.33)
-(polygon 2)
-G0 X0.393333 Y0.365000    (start point)
-G1 Z#101
-G1 X0.383333 Y0.361667
-G1 X0.363333 Y0.341667
-G1 X0.360000 Y0.328333
-G1 X0.360000 Y0.320000
-G1 X0.363333 Y0.306667
-G1 X0.383333 Y0.286667
-G1 X0.396667 Y0.283333
-G1 X0.405000 Y0.283333
-G1 X0.418333 Y0.286667
-G1 X0.438333 Y0.306667
-G1 X0.441667 Y0.320000
-G1 X0.441667 Y0.328333
-G1 X0.438333 Y0.341667
-G1 X0.418333 Y0.361667
-G1 X0.405000 Y0.365000
-G1 X0.393333 Y0.365000
-G0 Z#100
-(polygon end, distance 0.26)
-(polygon 3)
-G0 X0.093333 Y0.265000    (start point)
-G1 Z#101
-G1 X0.083333 Y0.261667
-G1 X0.063333 Y0.241667
-G1 X0.060000 Y0.228333
-G1 X0.060000 Y0.220000
-G1 X0.063333 Y0.206667
-G1 X0.083333 Y0.186667
-G1 X0.096667 Y0.183333
-G1 X0.105000 Y0.183333
-G1 X0.118333 Y0.186667
-G1 X0.138333 Y0.206667
-G1 X0.141667 Y0.220000
-G1 X0.141667 Y0.228333
-G1 X0.138333 Y0.241667
-G1 X0.118333 Y0.261667
-G1 X0.105000 Y0.265000
-G1 X0.093333 Y0.265000
-G0 Z#100
-(polygon end, distance 0.26)
-(polygon 4)
-G0 X0.393333 Y0.265000    (start point)
-G1 Z#101
-G1 X0.383333 Y0.261667
-G1 X0.363333 Y0.241667
-G1 X0.360000 Y0.228333
-G1 X0.360000 Y0.220000
-G1 X0.363333 Y0.206667
-G1 X0.383333 Y0.186667
-G1 X0.396667 Y0.183333
-G1 X0.405000 Y0.183333
-G1 X0.418333 Y0.186667
-G1 X0.438333 Y0.206667
-G1 X0.441667 Y0.220000
-G1 X0.441667 Y0.228333
-G1 X0.438333 Y0.241667
-G1 X0.418333 Y0.261667
-G1 X0.405000 Y0.265000
-G1 X0.393333 Y0.265000
-G0 Z#100
-(polygon end, distance 0.26)
-(end, total distance 27.85mm = 1.10in)
-M5 M9 M2
Index: ref/netlist_ba.gcode/netlist_ba.gcode.bottom.cnc
===================================================================
--- ref/netlist_ba.gcode/netlist_ba.gcode.bottom.cnc	(revision 28443)
+++ ref/netlist_ba.gcode/netlist_ba.gcode.bottom.cnc	(nonexistent)
@@ -1,82 +0,0 @@
-(Created by G-code exporter)
-(600 dpi)
-(Unit: inch)
-(Board size: 0.50x0.50 inches)#100=0.002000  (safe Z)
-#101=-0.000050  (cutting depth)
-(---------------------------------)
-G17 G20 G90 G64 P0.003 M3 S3000 M7 F1
-G0 Z#100
-(polygon 1)
-G0 X0.091667 Y0.365000    (start point)
-G1 Z#101
-G1 X0.081667 Y0.361667
-G1 X0.061667 Y0.341667
-G1 X0.058333 Y0.328333
-G1 X0.058333 Y0.320000
-G1 X0.061667 Y0.306667
-G1 X0.081667 Y0.286667
-G1 X0.095000 Y0.283333
-G1 X0.103333 Y0.283333
-G1 X0.116667 Y0.286667
-G1 X0.136667 Y0.306667
-G1 X0.140000 Y0.320000
-G1 X0.140000 Y0.328333
-G1 X0.136667 Y0.341667
-G1 X0.116667 Y0.361667
-G1 X0.103333 Y0.365000
-G1 X0.091667 Y0.365000
-G0 Z#100
-(polygon end, distance 0.26)
-(polygon 2)
-G0 X0.358333 Y0.365000    (start point)
-G1 Z#101
-G1 X0.358333 Y0.283333
-G1 X0.440000 Y0.283333
-G1 X0.440000 Y0.365000
-G1 X0.358333 Y0.365000
-G0 Z#100
-(polygon end, distance 0.33)
-(polygon 3)
-G0 X0.091667 Y0.265000    (start point)
-G1 Z#101
-G1 X0.081667 Y0.261667
-G1 X0.061667 Y0.241667
-G1 X0.058333 Y0.228333
-G1 X0.058333 Y0.220000
-G1 X0.061667 Y0.206667
-G1 X0.081667 Y0.186667
-G1 X0.095000 Y0.183333
-G1 X0.103333 Y0.183333
-G1 X0.116667 Y0.186667
-G1 X0.136667 Y0.206667
-G1 X0.140000 Y0.220000
-G1 X0.140000 Y0.228333
-G1 X0.136667 Y0.241667
-G1 X0.116667 Y0.261667
-G1 X0.103333 Y0.265000
-G1 X0.091667 Y0.265000
-G0 Z#100
-(polygon end, distance 0.26)
-(polygon 4)
-G0 X0.391667 Y0.265000    (start point)
-G1 Z#101
-G1 X0.381667 Y0.261667
-G1 X0.361667 Y0.241667
-G1 X0.358333 Y0.228333
-G1 X0.358333 Y0.220000
-G1 X0.361667 Y0.206667
-G1 X0.381667 Y0.186667
-G1 X0.395000 Y0.183333
-G1 X0.403333 Y0.183333
-G1 X0.416667 Y0.186667
-G1 X0.436667 Y0.206667
-G1 X0.440000 Y0.220000
-G1 X0.440000 Y0.228333
-G1 X0.436667 Y0.241667
-G1 X0.416667 Y0.261667
-G1 X0.403333 Y0.265000
-G1 X0.391667 Y0.265000
-G0 Z#100
-(polygon end, distance 0.26)
-(end, total distance 27.85mm = 1.10in)
-M5 M9 M2
Index: ref/netlist_ba.gcode/netlist_ba.gcode.drill.cnc
===================================================================
--- ref/netlist_ba.gcode/netlist_ba.gcode.drill.cnc	(revision 28443)
+++ ref/netlist_ba.gcode/netlist_ba.gcode.drill.cnc	(nonexistent)
@@ -1,13 +0,0 @@
-(Created by G-code exporter)
-(drill file: 4 drills)
-(Unit: inch)
-(Board size: 0.50x0.50 inches)#100=0.002000  (safe Z)
-#101=-0.002000  (drill depth)
-(---------------------------------)
-G17 G20 G90 G64 P0.003 M3 S3000 M7 F1
-G81 X0.100000 Y0.225000 Z#101 R#100
-G81 X0.100000 Y0.325000 Z#101 R#100
-G81 X0.400000 Y0.325000 Z#101 R#100
-G81 X0.400000 Y0.225000 Z#101 R#100
-M5 M9 M2
-(end, total distance 12.70mm = 0.50in)
Index: ref/elem_pads_ds.gcode/elem_pads_ds.gcode.top.cnc
===================================================================
--- ref/elem_pads_ds.gcode/elem_pads_ds.gcode.top.cnc	(revision 28443)
+++ ref/elem_pads_ds.gcode/elem_pads_ds.gcode.top.cnc	(nonexistent)
@@ -1,23 +0,0 @@
-(Created by G-code exporter)
-(600 dpi)
-(Unit: inch)
-(Board size: 0.50x0.50 inches)#100=0.002000  (safe Z)
-#101=-0.000050  (cutting depth)
-(---------------------------------)
-G17 G20 G90 G64 P0.003 M3 S3000 M7 F1
-G0 Z#100
-(polygon 1)
-G0 X0.173333 Y0.360000    (start point)
-G1 Z#101
-G1 X0.165000 Y0.351667
-G1 X0.165000 Y0.346667
-G1 X0.173333 Y0.338333
-G1 X0.253333 Y0.338333
-G1 X0.261667 Y0.346667
-G1 X0.261667 Y0.351667
-G1 X0.253333 Y0.360000
-G1 X0.173333 Y0.360000
-G0 Z#100
-(polygon end, distance 0.22)
-(end, total distance 5.52mm = 0.22in)
-M5 M9 M2
Index: ref/elem_pads_ds.gcode/elem_pads_ds.gcode.bottom.cnc
===================================================================
--- ref/elem_pads_ds.gcode/elem_pads_ds.gcode.bottom.cnc	(revision 28443)
+++ ref/elem_pads_ds.gcode/elem_pads_ds.gcode.bottom.cnc	(nonexistent)
@@ -1,23 +0,0 @@
-(Created by G-code exporter)
-(600 dpi)
-(Unit: inch)
-(Board size: 0.50x0.50 inches)#100=0.002000  (safe Z)
-#101=-0.000050  (cutting depth)
-(---------------------------------)
-G17 G20 G90 G64 P0.003 M3 S3000 M7 F1
-G0 Z#100
-(polygon 1)
-G0 X0.221667 Y0.335000    (start point)
-G1 Z#101
-G1 X0.213333 Y0.326667
-G1 X0.213333 Y0.246667
-G1 X0.221667 Y0.238333
-G1 X0.226667 Y0.238333
-G1 X0.235000 Y0.246667
-G1 X0.235000 Y0.326667
-G1 X0.226667 Y0.335000
-G1 X0.221667 Y0.335000
-G0 Z#100
-(polygon end, distance 0.22)
-(end, total distance 5.52mm = 0.22in)
-M5 M9 M2
Index: ref/elem_pads_ds.gcode/elem_pads_ds.gcode.drill.cnc
===================================================================
--- ref/elem_pads_ds.gcode/elem_pads_ds.gcode.drill.cnc	(revision 28443)
+++ ref/elem_pads_ds.gcode/elem_pads_ds.gcode.drill.cnc	(nonexistent)
@@ -1,9 +0,0 @@
-(Created by G-code exporter)
-(drill file: 0 drills)
-(Unit: inch)
-(Board size: 0.50x0.50 inches)#100=0.002000  (safe Z)
-#101=-0.002000  (drill depth)
-(---------------------------------)
-G17 G20 G90 G64 P0.003 M3 S3000 M7 F1
-M5 M9 M2
-(end, total distance 0.00mm = 0.00in)
Index: ref/line_overlap3.gcode/line_overlap3.gcode.top.cnc
===================================================================
--- ref/line_overlap3.gcode/line_overlap3.gcode.top.cnc	(revision 28443)
+++ ref/line_overlap3.gcode/line_overlap3.gcode.top.cnc	(nonexistent)
@@ -1,23 +0,0 @@
-(Created by G-code exporter)
-(600 dpi)
-(Unit: inch)
-(Board size: 0.50x0.50 inches)#100=0.002000  (safe Z)
-#101=-0.000050  (cutting depth)
-(---------------------------------)
-G17 G20 G90 G64 P0.003 M3 S3000 M7 F1
-G0 Z#100
-(polygon 1)
-G0 X0.196667 Y0.315000    (start point)
-G1 Z#101
-G1 X0.185000 Y0.303333
-G1 X0.185000 Y0.295000
-G1 X0.196667 Y0.283333
-G1 X0.355000 Y0.283333
-G1 X0.366667 Y0.295000
-G1 X0.366667 Y0.303333
-G1 X0.355000 Y0.315000
-G1 X0.196667 Y0.315000
-G0 Z#100
-(polygon end, distance 0.40)
-(end, total distance 10.14mm = 0.40in)
-M5 M9 M2
Index: ref/line_normal.gcode/line_normal.gcode.top.cnc
===================================================================
--- ref/line_normal.gcode/line_normal.gcode.top.cnc	(revision 28443)
+++ ref/line_normal.gcode/line_normal.gcode.top.cnc	(nonexistent)
@@ -1,47 +0,0 @@
-(Created by G-code exporter)
-(600 dpi)
-(Unit: inch)
-(Board size: 0.50x0.50 inches)#100=0.002000  (safe Z)
-#101=-0.000050  (cutting depth)
-(---------------------------------)
-G17 G20 G90 G64 P0.003 M3 S3000 M7 F1
-G0 Z#100
-(polygon 1)
-G0 X0.248333 Y0.385000    (start point)
-G1 Z#101
-G1 X0.240000 Y0.376667
-G1 X0.240000 Y0.268333
-G1 X0.151667 Y0.355000
-G1 X0.146667 Y0.353333
-G1 X0.145000 Y0.348333
-G1 X0.226667 Y0.265000
-G1 X0.121667 Y0.265000
-G1 X0.110000 Y0.253333
-G1 X0.110000 Y0.245000
-G1 X0.121667 Y0.233333
-G1 X0.240000 Y0.233333
-G1 X0.240000 Y0.121667
-G1 X0.248333 Y0.113333
-G1 X0.253333 Y0.113333
-G1 X0.261667 Y0.121667
-G1 X0.261667 Y0.231667
-G1 X0.268333 Y0.233333
-G1 X0.405000 Y0.233333
-G1 X0.416667 Y0.245000
-G1 X0.416667 Y0.253333
-G1 X0.405000 Y0.265000
-G1 X0.366667 Y0.265000
-G1 X0.408333 Y0.280000
-G1 X0.420000 Y0.291667
-G1 X0.420000 Y0.306667
-G1 X0.410000 Y0.318333
-G1 X0.398333 Y0.320000
-G1 X0.266667 Y0.276667
-G1 X0.261667 Y0.275000
-G1 X0.261667 Y0.376667
-G1 X0.253333 Y0.385000
-G1 X0.248333 Y0.385000
-G0 Z#100
-(polygon end, distance 1.47)
-(end, total distance 37.45mm = 1.47in)
-M5 M9 M2
Index: ref/padrot.gcode/padrot.gcode.top.cnc
===================================================================
--- ref/padrot.gcode/padrot.gcode.top.cnc	(revision 28443)
+++ ref/padrot.gcode/padrot.gcode.top.cnc	(nonexistent)
@@ -1,103 +0,0 @@
-(Created by G-code exporter)
-(600 dpi)
-(Unit: inch)
-(Board size: 0.50x0.50 inches)#100=0.002000  (safe Z)
-#101=-0.000050  (cutting depth)
-(---------------------------------)
-G17 G20 G90 G64 P0.003 M3 S3000 M7 F1
-G0 Z#100
-(polygon 1)
-G0 X0.048333 Y0.460000    (start point)
-G1 Z#101
-G1 X0.040000 Y0.451667
-G1 X0.040000 Y0.446667
-G1 X0.048333 Y0.438333
-G1 X0.128333 Y0.438333
-G1 X0.136667 Y0.446667
-G1 X0.136667 Y0.451667
-G1 X0.128333 Y0.460000
-G1 X0.048333 Y0.460000
-G0 Z#100
-(polygon end, distance 0.22)
-(polygon 2)
-G0 X0.195000 Y0.455000    (start point)
-G1 Z#101
-G1 X0.195000 Y0.443333
-G1 X0.281667 Y0.443333
-G1 X0.281667 Y0.455000
-G1 X0.195000 Y0.455000
-G0 Z#100
-(polygon end, distance 0.20)
-(polygon 3)
-G0 X0.048333 Y0.385000    (start point)
-G1 Z#101
-G1 X0.040000 Y0.376667
-G1 X0.040000 Y0.296667
-G1 X0.048333 Y0.288333
-G1 X0.053333 Y0.288333
-G1 X0.061667 Y0.296667
-G1 X0.061667 Y0.376667
-G1 X0.053333 Y0.385000
-G1 X0.048333 Y0.385000
-G0 Z#100
-(polygon end, distance 0.22)
-(polygon 4)
-G0 X0.123333 Y0.360000    (start point)
-G1 Z#101
-G1 X0.115000 Y0.351667
-G1 X0.115000 Y0.346667
-G1 X0.176667 Y0.285000
-G1 X0.181667 Y0.285000
-G1 X0.190000 Y0.293333
-G1 X0.190000 Y0.298333
-G1 X0.128333 Y0.360000
-G1 X0.123333 Y0.360000
-G0 Z#100
-(polygon end, distance 0.22)
-(polygon 5)
-G0 X0.225000 Y0.356667    (start point)
-G1 Z#101
-G1 X0.218333 Y0.348333
-G1 X0.280000 Y0.288333
-G1 X0.286667 Y0.296667
-G1 X0.225000 Y0.356667
-G0 Z#100
-(polygon end, distance 0.19)
-(polygon 6)
-G0 X0.045000 Y0.230000    (start point)
-G1 Z#101
-G1 X0.045000 Y0.143333
-G1 X0.056667 Y0.143333
-G1 X0.056667 Y0.230000
-G1 X0.045000 Y0.230000
-G0 Z#100
-(polygon end, distance 0.20)
-(polygon 7)
-G0 X0.123333 Y0.210000    (start point)
-G1 Z#101
-G1 X0.115000 Y0.201667
-G1 X0.115000 Y0.196667
-G1 X0.121667 Y0.190000
-G1 X0.193333 Y0.160000
-G1 X0.201667 Y0.161667
-G1 X0.206667 Y0.170000
-G1 X0.205000 Y0.176667
-G1 X0.196667 Y0.181667
-G1 X0.128333 Y0.210000
-G1 X0.123333 Y0.210000
-G0 Z#100
-(polygon end, distance 0.22)
-(polygon 8)
-G0 X0.271667 Y0.206667    (start point)
-G1 Z#101
-G1 X0.268333 Y0.196667
-G1 X0.270000 Y0.195000
-G1 X0.348333 Y0.163333
-G1 X0.353333 Y0.173333
-G1 X0.351667 Y0.175000
-G1 X0.288333 Y0.200000
-G1 X0.271667 Y0.206667
-G0 Z#100
-(polygon end, distance 0.20)
-(end, total distance 42.00mm = 1.65in)
-M5 M9 M2
Index: ref/line_overlap4.gcode/line_overlap4.gcode.top.cnc
===================================================================
--- ref/line_overlap4.gcode/line_overlap4.gcode.top.cnc	(revision 28443)
+++ ref/line_overlap4.gcode/line_overlap4.gcode.top.cnc	(nonexistent)
@@ -1,40 +0,0 @@
-(Created by G-code exporter)
-(600 dpi)
-(Unit: inch)
-(Board size: 0.50x0.50 inches)#100=0.002000  (safe Z)
-#101=-0.000050  (cutting depth)
-(---------------------------------)
-G17 G20 G90 G64 P0.003 M3 S3000 M7 F1
-G0 Z#100
-(polygon 1)
-G0 X0.150000 Y0.350000    (start point)
-G1 Z#101
-G1 X0.150000 Y0.173333
-G1 X0.301667 Y0.173333
-G1 X0.301667 Y0.278333
-G1 X0.193333 Y0.278333
-G1 X0.185000 Y0.281667
-G1 X0.180000 Y0.295000
-G1 X0.180000 Y0.303333
-G1 X0.185000 Y0.316667
-G1 X0.196667 Y0.321667
-G1 X0.301667 Y0.321667
-G1 X0.301667 Y0.350000
-G1 X0.150000 Y0.350000
-G0 Z#100
-(polygon end, distance 0.89)
-(polygon 2)
-G0 X0.196667 Y0.315000    (start point)
-G1 Z#101
-G1 X0.185000 Y0.303333
-G1 X0.185000 Y0.295000
-G1 X0.196667 Y0.283333
-G1 X0.355000 Y0.283333
-G1 X0.366667 Y0.295000
-G1 X0.366667 Y0.303333
-G1 X0.355000 Y0.315000
-G1 X0.196667 Y0.315000
-G0 Z#100
-(polygon end, distance 0.40)
-(end, total distance 32.63mm = 1.28in)
-M5 M9 M2
Index: ref/poly_triangle.gcode/poly_triangle.gcode.top.cnc
===================================================================
--- ref/poly_triangle.gcode/poly_triangle.gcode.top.cnc	(revision 28443)
+++ ref/poly_triangle.gcode/poly_triangle.gcode.top.cnc	(nonexistent)
@@ -1,48 +0,0 @@
-(Created by G-code exporter)
-(600 dpi)
-(Unit: inch)
-(Board size: 0.50x0.50 inches)#100=0.002000  (safe Z)
-#101=-0.000050  (cutting depth)
-(---------------------------------)
-G17 G20 G90 G64 P0.003 M3 S3000 M7 F1
-G0 Z#100
-(polygon 1)
-G0 X0.025000 Y0.475000    (start point)
-G1 Z#101
-G1 X0.025000 Y0.373333
-G1 X0.126667 Y0.473333
-G1 X0.126667 Y0.475000
-G1 X0.025000 Y0.475000
-G0 Z#100
-(polygon end, distance 0.35)
-(polygon 2)
-G0 X0.150000 Y0.475000    (start point)
-G1 Z#101
-G1 X0.025000 Y0.348333
-G1 X0.151667 Y0.348333
-G1 X0.151667 Y0.475000
-G1 X0.150000 Y0.475000
-G0 Z#100
-(polygon end, distance 0.43)
-(polygon 3)
-G0 X0.300000 Y0.475000    (start point)
-G1 Z#101
-G1 X0.175000 Y0.348333
-G1 X0.426667 Y0.348333
-G1 X0.301667 Y0.475000
-G1 X0.300000 Y0.475000
-G0 Z#100
-(polygon end, distance 0.61)
-(polygon 4)
-G0 X0.025000 Y0.325000    (start point)
-G1 Z#101
-G1 X0.025000 Y0.323333
-G1 X0.050000 Y0.150000
-G1 X0.051667 Y0.148333
-G1 X0.301667 Y0.298333
-G1 X0.290000 Y0.300000
-G1 X0.025000 Y0.325000
-G0 Z#100
-(polygon end, distance 0.75)
-(end, total distance 54.32mm = 2.14in)
-M5 M9 M2
Index: ref/elem_pads.gcode/elem_pads.gcode.top.cnc
===================================================================
--- ref/elem_pads.gcode/elem_pads.gcode.top.cnc	(revision 28443)
+++ ref/elem_pads.gcode/elem_pads.gcode.top.cnc	(nonexistent)
@@ -1,73 +0,0 @@
-(Created by G-code exporter)
-(600 dpi)
-(Unit: inch)
-(Board size: 0.50x0.50 inches)#100=0.002000  (safe Z)
-#101=-0.000050  (cutting depth)
-(---------------------------------)
-G17 G20 G90 G64 P0.003 M3 S3000 M7 F1
-G0 Z#100
-(polygon 1)
-G0 X0.165000 Y0.436667    (start point)
-G1 Z#101
-G1 X0.165000 Y0.361667
-G1 X0.218333 Y0.361667
-G1 X0.218333 Y0.436667
-G1 X0.165000 Y0.436667
-G0 Z#100
-(polygon end, distance 0.26)
-(polygon 2)
-G0 X0.283333 Y0.436667    (start point)
-G1 Z#101
-G1 X0.283333 Y0.361667
-G1 X0.336667 Y0.361667
-G1 X0.336667 Y0.436667
-G1 X0.283333 Y0.436667
-G0 Z#100
-(polygon end, distance 0.26)
-(polygon 3)
-G0 X0.216667 Y0.211667    (start point)
-G1 Z#101
-G1 X0.216667 Y0.175000
-G1 X0.233333 Y0.175000
-G1 X0.233333 Y0.211667
-G1 X0.216667 Y0.211667
-G0 Z#100
-(polygon end, distance 0.11)
-(polygon 4)
-G0 X0.243333 Y0.211667    (start point)
-G1 Z#101
-G1 X0.243333 Y0.175000
-G1 X0.260000 Y0.175000
-G1 X0.260000 Y0.211667
-G1 X0.243333 Y0.211667
-G0 Z#100
-(polygon end, distance 0.11)
-(polygon 5)
-G0 X0.268333 Y0.211667    (start point)
-G1 Z#101
-G1 X0.268333 Y0.175000
-G1 X0.283333 Y0.175000
-G1 X0.283333 Y0.211667
-G1 X0.268333 Y0.211667
-G0 Z#100
-(polygon end, distance 0.10)
-(polygon 6)
-G0 X0.216667 Y0.141667    (start point)
-G1 Z#101
-G1 X0.216667 Y0.105000
-G1 X0.233333 Y0.105000
-G1 X0.233333 Y0.141667
-G1 X0.216667 Y0.141667
-G0 Z#100
-(polygon end, distance 0.11)
-(polygon 7)
-G0 X0.268333 Y0.141667    (start point)
-G1 Z#101
-G1 X0.268333 Y0.105000
-G1 X0.283333 Y0.105000
-G1 X0.283333 Y0.141667
-G1 X0.268333 Y0.141667
-G0 Z#100
-(polygon end, distance 0.10)
-(end, total distance 26.42mm = 1.04in)
-M5 M9 M2
Index: ref/line_f_clear.gcode/line_f_clear.gcode.top.cnc
===================================================================
--- ref/line_f_clear.gcode/line_f_clear.gcode.top.cnc	(revision 28443)
+++ ref/line_f_clear.gcode/line_f_clear.gcode.top.cnc	(nonexistent)
@@ -1,87 +0,0 @@
-(Created by G-code exporter)
-(600 dpi)
-(Unit: inch)
-(Board size: 0.50x0.50 inches)#100=0.002000  (safe Z)
-#101=-0.000050  (cutting depth)
-(---------------------------------)
-G17 G20 G90 G64 P0.003 M3 S3000 M7 F1
-G0 Z#100
-(polygon 1)
-G0 X0.025000 Y0.475000    (start point)
-G1 Z#101
-G1 X0.025000 Y0.023333
-G1 X0.476667 Y0.023333
-G1 X0.476667 Y0.475000
-G1 X0.025000 Y0.475000
-G0 Z#100
-(polygon end, distance 1.81)
-(polygon 2)
-G0 X0.245000 Y0.421667    (start point)
-G1 Z#101
-G1 X0.235000 Y0.418333
-G1 X0.221667 Y0.411667
-G1 X0.213333 Y0.401667
-G1 X0.205000 Y0.385000
-G1 X0.205000 Y0.301667
-G1 X0.240000 Y0.268333
-G1 X0.240000 Y0.376667
-G1 X0.248333 Y0.385000
-G1 X0.253333 Y0.385000
-G1 X0.261667 Y0.376667
-G1 X0.261667 Y0.275000
-G1 X0.268333 Y0.276667
-G1 X0.295000 Y0.286667
-G1 X0.295000 Y0.390000
-G1 X0.288333 Y0.403333
-G1 X0.276667 Y0.413333
-G1 X0.263333 Y0.420000
-G1 X0.245000 Y0.421667
-G0 Z#100
-(polygon end, distance 0.63)
-(polygon 3)
-G0 X0.205000 Y0.286667    (start point)
-G1 Z#101
-G1 X0.205000 Y0.270000
-G1 X0.123333 Y0.270000
-G1 X0.111667 Y0.261667
-G1 X0.106667 Y0.250000
-G1 X0.108333 Y0.241667
-G1 X0.120000 Y0.230000
-G1 X0.205000 Y0.230000
-G1 X0.205000 Y0.113333
-G1 X0.213333 Y0.096667
-G1 X0.221667 Y0.086667
-G1 X0.238333 Y0.078333
-G1 X0.263333 Y0.078333
-G1 X0.276667 Y0.085000
-G1 X0.288333 Y0.095000
-G1 X0.295000 Y0.108333
-G1 X0.296667 Y0.230000
-G1 X0.406667 Y0.230000
-G1 X0.420000 Y0.243333
-G1 X0.420000 Y0.253333
-G1 X0.413333 Y0.263333
-G1 X0.401667 Y0.270000
-G1 X0.376667 Y0.270000
-G1 X0.366667 Y0.265000
-G1 X0.405000 Y0.265000
-G1 X0.416667 Y0.253333
-G1 X0.416667 Y0.245000
-G1 X0.405000 Y0.233333
-G1 X0.268333 Y0.233333
-G1 X0.261667 Y0.231667
-G1 X0.261667 Y0.121667
-G1 X0.253333 Y0.113333
-G1 X0.248333 Y0.113333
-G1 X0.240000 Y0.121667
-G1 X0.240000 Y0.233333
-G1 X0.121667 Y0.233333
-G1 X0.110000 Y0.245000
-G1 X0.110000 Y0.253333
-G1 X0.120000 Y0.263333
-G1 X0.226667 Y0.266667
-G1 X0.205000 Y0.286667
-G0 Z#100
-(polygon end, distance 1.56)
-(end, total distance 101.55mm = 4.00in)
-M5 M9 M2
Index: ref/line_zerolen.gcode/line_zerolen.gcode.top.cnc
===================================================================
--- ref/line_zerolen.gcode/line_zerolen.gcode.top.cnc	(revision 28443)
+++ ref/line_zerolen.gcode/line_zerolen.gcode.top.cnc	(nonexistent)
@@ -1,19 +0,0 @@
-(Created by G-code exporter)
-(600 dpi)
-(Unit: inch)
-(Board size: 0.50x0.50 inches)#100=0.002000  (safe Z)
-#101=-0.000050  (cutting depth)
-(---------------------------------)
-G17 G20 G90 G64 P0.003 M3 S3000 M7 F1
-G0 Z#100
-(polygon 1)
-G0 X0.191667 Y0.308333    (start point)
-G1 Z#101
-G1 X0.191667 Y0.290000
-G1 X0.210000 Y0.290000
-G1 X0.210000 Y0.308333
-G1 X0.191667 Y0.308333
-G0 Z#100
-(polygon end, distance 0.07)
-(end, total distance 1.86mm = 0.07in)
-M5 M9 M2
Index: ref/elem_pins.gcode/elem_pins.gcode.bottom.cnc
===================================================================
--- ref/elem_pins.gcode/elem_pins.gcode.bottom.cnc	(revision 28443)
+++ ref/elem_pins.gcode/elem_pins.gcode.bottom.cnc	(nonexistent)
@@ -1,66 +0,0 @@
-(Created by G-code exporter)
-(600 dpi)
-(Unit: inch)
-(Board size: 0.50x0.50 inches)#100=0.002000  (safe Z)
-#101=-0.000050  (cutting depth)
-(---------------------------------)
-G17 G20 G90 G64 P0.003 M3 S3000 M7 F1
-G0 Z#100
-(polygon 1)
-G0 X0.116667 Y0.415000    (start point)
-G1 Z#101
-G1 X0.106667 Y0.411667
-G1 X0.086667 Y0.391667
-G1 X0.083333 Y0.378333
-G1 X0.083333 Y0.370000
-G1 X0.086667 Y0.356667
-G1 X0.106667 Y0.336667
-G1 X0.120000 Y0.333333
-G1 X0.128333 Y0.333333
-G1 X0.141667 Y0.336667
-G1 X0.161667 Y0.356667
-G1 X0.165000 Y0.370000
-G1 X0.165000 Y0.378333
-G1 X0.161667 Y0.391667
-G1 X0.141667 Y0.411667
-G1 X0.128333 Y0.415000
-G1 X0.116667 Y0.415000
-G0 Z#100
-(polygon end, distance 0.26)
-(polygon 2)
-G0 X0.383333 Y0.415000    (start point)
-G1 Z#101
-G1 X0.383333 Y0.333333
-G1 X0.465000 Y0.333333
-G1 X0.465000 Y0.415000
-G1 X0.383333 Y0.415000
-G0 Z#100
-(polygon end, distance 0.33)
-(polygon 3)
-G0 X0.090000 Y0.255000    (start point)
-G1 Z#101
-G1 X0.043333 Y0.206667
-G1 X0.043333 Y0.156667
-G1 X0.091667 Y0.133333
-G1 X0.156667 Y0.133333
-G1 X0.205000 Y0.156667
-G1 X0.205000 Y0.208333
-G1 X0.156667 Y0.255000
-G1 X0.090000 Y0.255000
-G0 Z#100
-(polygon end, distance 0.48)
-(polygon 4)
-G0 X0.390000 Y0.215000    (start point)
-G1 Z#101
-G1 X0.343333 Y0.191667
-G1 X0.343333 Y0.156667
-G1 X0.391667 Y0.133333
-G1 X0.441667 Y0.133333
-G1 X0.465000 Y0.158333
-G1 X0.465000 Y0.190000
-G1 X0.441667 Y0.215000
-G1 X0.390000 Y0.215000
-G0 Z#100
-(polygon end, distance 0.34)
-(end, total distance 35.58mm = 1.40in)
-M5 M9 M2
Index: ref/elem_pins.gcode/elem_pins.gcode.drill.cnc
===================================================================
--- ref/elem_pins.gcode/elem_pins.gcode.drill.cnc	(revision 28443)
+++ ref/elem_pins.gcode/elem_pins.gcode.drill.cnc	(nonexistent)
@@ -1,13 +0,0 @@
-(Created by G-code exporter)
-(drill file: 4 drills)
-(Unit: inch)
-(Board size: 0.50x0.50 inches)#100=0.002000  (safe Z)
-#101=-0.002000  (drill depth)
-(---------------------------------)
-G17 G20 G90 G64 P0.003 M3 S3000 M7 F1
-G81 X0.125000 Y0.175000 Z#101 R#100
-G81 X0.125000 Y0.375000 Z#101 R#100
-G81 X0.425000 Y0.375000 Z#101 R#100
-G81 X0.425000 Y0.175000 Z#101 R#100
-M5 M9 M2
-(end, total distance 17.78mm = 0.70in)
Index: ref/elem_pins.gcode/elem_pins.gcode.group-1.cnc
===================================================================
--- ref/elem_pins.gcode/elem_pins.gcode.group-1.cnc	(revision 28443)
+++ ref/elem_pins.gcode/elem_pins.gcode.group-1.cnc	(nonexistent)
@@ -1,66 +0,0 @@
-(Created by G-code exporter)
-(600 dpi)
-(Unit: inch)
-(Board size: 0.50x0.50 inches)#100=0.002000  (safe Z)
-#101=-0.000050  (cutting depth)
-(---------------------------------)
-G17 G20 G90 G64 P0.003 M3 S3000 M7 F1
-G0 Z#100
-(polygon 1)
-G0 X0.035000 Y0.415000    (start point)
-G1 Z#101
-G1 X0.035000 Y0.333333
-G1 X0.116667 Y0.333333
-G1 X0.116667 Y0.415000
-G1 X0.035000 Y0.415000
-G0 Z#100
-(polygon end, distance 0.33)
-(polygon 2)
-G0 X0.368333 Y0.415000    (start point)
-G1 Z#101
-G1 X0.358333 Y0.411667
-G1 X0.338333 Y0.391667
-G1 X0.335000 Y0.378333
-G1 X0.335000 Y0.370000
-G1 X0.338333 Y0.356667
-G1 X0.358333 Y0.336667
-G1 X0.371667 Y0.333333
-G1 X0.380000 Y0.333333
-G1 X0.393333 Y0.336667
-G1 X0.413333 Y0.356667
-G1 X0.416667 Y0.370000
-G1 X0.416667 Y0.378333
-G1 X0.413333 Y0.391667
-G1 X0.393333 Y0.411667
-G1 X0.380000 Y0.415000
-G1 X0.368333 Y0.415000
-G0 Z#100
-(polygon end, distance 0.26)
-(polygon 3)
-G0 X0.341667 Y0.255000    (start point)
-G1 Z#101
-G1 X0.295000 Y0.206667
-G1 X0.295000 Y0.156667
-G1 X0.343333 Y0.133333
-G1 X0.408333 Y0.133333
-G1 X0.456667 Y0.156667
-G1 X0.456667 Y0.208333
-G1 X0.408333 Y0.255000
-G1 X0.341667 Y0.255000
-G0 Z#100
-(polygon end, distance 0.48)
-(polygon 4)
-G0 X0.058333 Y0.215000    (start point)
-G1 Z#101
-G1 X0.035000 Y0.190000
-G1 X0.035000 Y0.158333
-G1 X0.058333 Y0.133333
-G1 X0.108333 Y0.133333
-G1 X0.156667 Y0.156667
-G1 X0.156667 Y0.191667
-G1 X0.108333 Y0.215000
-G1 X0.058333 Y0.215000
-G0 Z#100
-(polygon end, distance 0.34)
-(end, total distance 35.58mm = 1.40in)
-M5 M9 M2
Index: ref/elem_pins.gcode/elem_pins.gcode.top.cnc
===================================================================
--- ref/elem_pins.gcode/elem_pins.gcode.top.cnc	(revision 28443)
+++ ref/elem_pins.gcode/elem_pins.gcode.top.cnc	(nonexistent)
@@ -1,66 +0,0 @@
-(Created by G-code exporter)
-(600 dpi)
-(Unit: inch)
-(Board size: 0.50x0.50 inches)#100=0.002000  (safe Z)
-#101=-0.000050  (cutting depth)
-(---------------------------------)
-G17 G20 G90 G64 P0.003 M3 S3000 M7 F1
-G0 Z#100
-(polygon 1)
-G0 X0.035000 Y0.415000    (start point)
-G1 Z#101
-G1 X0.035000 Y0.333333
-G1 X0.116667 Y0.333333
-G1 X0.116667 Y0.415000
-G1 X0.035000 Y0.415000
-G0 Z#100
-(polygon end, distance 0.33)
-(polygon 2)
-G0 X0.368333 Y0.415000    (start point)
-G1 Z#101
-G1 X0.358333 Y0.411667
-G1 X0.338333 Y0.391667
-G1 X0.335000 Y0.378333
-G1 X0.335000 Y0.370000
-G1 X0.338333 Y0.356667
-G1 X0.358333 Y0.336667
-G1 X0.371667 Y0.333333
-G1 X0.380000 Y0.333333
-G1 X0.393333 Y0.336667
-G1 X0.413333 Y0.356667
-G1 X0.416667 Y0.370000
-G1 X0.416667 Y0.378333
-G1 X0.413333 Y0.391667
-G1 X0.393333 Y0.411667
-G1 X0.380000 Y0.415000
-G1 X0.368333 Y0.415000
-G0 Z#100
-(polygon end, distance 0.26)
-(polygon 3)
-G0 X0.341667 Y0.255000    (start point)
-G1 Z#101
-G1 X0.295000 Y0.206667
-G1 X0.295000 Y0.156667
-G1 X0.343333 Y0.133333
-G1 X0.408333 Y0.133333
-G1 X0.456667 Y0.156667
-G1 X0.456667 Y0.208333
-G1 X0.408333 Y0.255000
-G1 X0.341667 Y0.255000
-G0 Z#100
-(polygon end, distance 0.48)
-(polygon 4)
-G0 X0.058333 Y0.215000    (start point)
-G1 Z#101
-G1 X0.035000 Y0.190000
-G1 X0.035000 Y0.158333
-G1 X0.058333 Y0.133333
-G1 X0.108333 Y0.133333
-G1 X0.156667 Y0.156667
-G1 X0.156667 Y0.191667
-G1 X0.108333 Y0.215000
-G1 X0.058333 Y0.215000
-G0 Z#100
-(polygon end, distance 0.34)
-(end, total distance 35.58mm = 1.40in)
-M5 M9 M2
Index: ref/layer_outline.gcode/layer_outline.gcode.outline.cnc
===================================================================
--- ref/layer_outline.gcode/layer_outline.gcode.outline.cnc	(revision 28443)
+++ ref/layer_outline.gcode/layer_outline.gcode.outline.cnc	(nonexistent)
@@ -1,32 +0,0 @@
-(Created by G-code exporter)
-(600 dpi)
-(Unit: inch)
-(Board size: 0.50x0.50 inches)#100=0.002000  (safe Z)
-#101=-0.000050  (cutting depth)
-(---------------------------------)
-G17 G20 G90 G64 P0.003 M3 S3000 M7 F1
-G0 Z#100
-(polygon 1)
-G0 X0.073333 Y0.410000    (start point)
-G1 Z#101
-G1 X0.065000 Y0.401667
-G1 X0.065000 Y0.096667
-G1 X0.073333 Y0.088333
-G1 X0.378333 Y0.088333
-G1 X0.386667 Y0.096667
-G1 X0.386667 Y0.101667
-G1 X0.078333 Y0.410000
-G1 X0.073333 Y0.410000
-G0 Z#100
-(polygon end, distance 1.09)
-(polygon 2)
-G0 X0.086667 Y0.373333    (start point)
-G1 Z#101
-G1 X0.086667 Y0.110000
-G1 X0.350000 Y0.110000
-G1 X0.088333 Y0.373333
-G1 X0.086667 Y0.373333
-G0 Z#100
-(polygon end, distance 0.90)
-(end, total distance 50.57mm = 1.99in)
-M5 M9 M2
Index: ref/netlist.gcode/netlist.gcode.top.cnc
===================================================================
--- ref/netlist.gcode/netlist.gcode.top.cnc	(revision 28443)
+++ ref/netlist.gcode/netlist.gcode.top.cnc	(nonexistent)
@@ -1,82 +0,0 @@
-(Created by G-code exporter)
-(600 dpi)
-(Unit: inch)
-(Board size: 0.50x0.50 inches)#100=0.002000  (safe Z)
-#101=-0.000050  (cutting depth)
-(---------------------------------)
-G17 G20 G90 G64 P0.003 M3 S3000 M7 F1
-G0 Z#100
-(polygon 1)
-G0 X0.060000 Y0.365000    (start point)
-G1 Z#101
-G1 X0.060000 Y0.283333
-G1 X0.141667 Y0.283333
-G1 X0.141667 Y0.365000
-G1 X0.060000 Y0.365000
-G0 Z#100
-(polygon end, distance 0.33)
-(polygon 2)
-G0 X0.393333 Y0.365000    (start point)
-G1 Z#101
-G1 X0.383333 Y0.361667
-G1 X0.363333 Y0.341667
-G1 X0.360000 Y0.328333
-G1 X0.360000 Y0.320000
-G1 X0.363333 Y0.306667
-G1 X0.383333 Y0.286667
-G1 X0.396667 Y0.283333
-G1 X0.405000 Y0.283333
-G1 X0.418333 Y0.286667
-G1 X0.438333 Y0.306667
-G1 X0.441667 Y0.320000
-G1 X0.441667 Y0.328333
-G1 X0.438333 Y0.341667
-G1 X0.418333 Y0.361667
-G1 X0.405000 Y0.365000
-G1 X0.393333 Y0.365000
-G0 Z#100
-(polygon end, distance 0.26)
-(polygon 3)
-G0 X0.093333 Y0.265000    (start point)
-G1 Z#101
-G1 X0.083333 Y0.261667
-G1 X0.063333 Y0.241667
-G1 X0.060000 Y0.228333
-G1 X0.060000 Y0.220000
-G1 X0.063333 Y0.206667
-G1 X0.083333 Y0.186667
-G1 X0.096667 Y0.183333
-G1 X0.105000 Y0.183333
-G1 X0.118333 Y0.186667
-G1 X0.138333 Y0.206667
-G1 X0.141667 Y0.220000
-G1 X0.141667 Y0.228333
-G1 X0.138333 Y0.241667
-G1 X0.118333 Y0.261667
-G1 X0.105000 Y0.265000
-G1 X0.093333 Y0.265000
-G0 Z#100
-(polygon end, distance 0.26)
-(polygon 4)
-G0 X0.393333 Y0.265000    (start point)
-G1 Z#101
-G1 X0.383333 Y0.261667
-G1 X0.363333 Y0.241667
-G1 X0.360000 Y0.228333
-G1 X0.360000 Y0.220000
-G1 X0.363333 Y0.206667
-G1 X0.383333 Y0.186667
-G1 X0.396667 Y0.183333
-G1 X0.405000 Y0.183333
-G1 X0.418333 Y0.186667
-G1 X0.438333 Y0.206667
-G1 X0.441667 Y0.220000
-G1 X0.441667 Y0.228333
-G1 X0.438333 Y0.241667
-G1 X0.418333 Y0.261667
-G1 X0.405000 Y0.265000
-G1 X0.393333 Y0.265000
-G0 Z#100
-(polygon end, distance 0.26)
-(end, total distance 27.85mm = 1.10in)
-M5 M9 M2
Index: ref/netlist.gcode/netlist.gcode.bottom.cnc
===================================================================
--- ref/netlist.gcode/netlist.gcode.bottom.cnc	(revision 28443)
+++ ref/netlist.gcode/netlist.gcode.bottom.cnc	(nonexistent)
@@ -1,82 +0,0 @@
-(Created by G-code exporter)
-(600 dpi)
-(Unit: inch)
-(Board size: 0.50x0.50 inches)#100=0.002000  (safe Z)
-#101=-0.000050  (cutting depth)
-(---------------------------------)
-G17 G20 G90 G64 P0.003 M3 S3000 M7 F1
-G0 Z#100
-(polygon 1)
-G0 X0.091667 Y0.365000    (start point)
-G1 Z#101
-G1 X0.081667 Y0.361667
-G1 X0.061667 Y0.341667
-G1 X0.058333 Y0.328333
-G1 X0.058333 Y0.320000
-G1 X0.061667 Y0.306667
-G1 X0.081667 Y0.286667
-G1 X0.095000 Y0.283333
-G1 X0.103333 Y0.283333
-G1 X0.116667 Y0.286667
-G1 X0.136667 Y0.306667
-G1 X0.140000 Y0.320000
-G1 X0.140000 Y0.328333
-G1 X0.136667 Y0.341667
-G1 X0.116667 Y0.361667
-G1 X0.103333 Y0.365000
-G1 X0.091667 Y0.365000
-G0 Z#100
-(polygon end, distance 0.26)
-(polygon 2)
-G0 X0.358333 Y0.365000    (start point)
-G1 Z#101
-G1 X0.358333 Y0.283333
-G1 X0.440000 Y0.283333
-G1 X0.440000 Y0.365000
-G1 X0.358333 Y0.365000
-G0 Z#100
-(polygon end, distance 0.33)
-(polygon 3)
-G0 X0.091667 Y0.265000    (start point)
-G1 Z#101
-G1 X0.081667 Y0.261667
-G1 X0.061667 Y0.241667
-G1 X0.058333 Y0.228333
-G1 X0.058333 Y0.220000
-G1 X0.061667 Y0.206667
-G1 X0.081667 Y0.186667
-G1 X0.095000 Y0.183333
-G1 X0.103333 Y0.183333
-G1 X0.116667 Y0.186667
-G1 X0.136667 Y0.206667
-G1 X0.140000 Y0.220000
-G1 X0.140000 Y0.228333
-G1 X0.136667 Y0.241667
-G1 X0.116667 Y0.261667
-G1 X0.103333 Y0.265000
-G1 X0.091667 Y0.265000
-G0 Z#100
-(polygon end, distance 0.26)
-(polygon 4)
-G0 X0.391667 Y0.265000    (start point)
-G1 Z#101
-G1 X0.381667 Y0.261667
-G1 X0.361667 Y0.241667
-G1 X0.358333 Y0.228333
-G1 X0.358333 Y0.220000
-G1 X0.361667 Y0.206667
-G1 X0.381667 Y0.186667
-G1 X0.395000 Y0.183333
-G1 X0.403333 Y0.183333
-G1 X0.416667 Y0.186667
-G1 X0.436667 Y0.206667
-G1 X0.440000 Y0.220000
-G1 X0.440000 Y0.228333
-G1 X0.436667 Y0.241667
-G1 X0.416667 Y0.261667
-G1 X0.403333 Y0.265000
-G1 X0.391667 Y0.265000
-G0 Z#100
-(polygon end, distance 0.26)
-(end, total distance 27.85mm = 1.10in)
-M5 M9 M2
Index: ref/netlist.gcode/netlist.gcode.drill.cnc
===================================================================
--- ref/netlist.gcode/netlist.gcode.drill.cnc	(revision 28443)
+++ ref/netlist.gcode/netlist.gcode.drill.cnc	(nonexistent)
@@ -1,13 +0,0 @@
-(Created by G-code exporter)
-(drill file: 4 drills)
-(Unit: inch)
-(Board size: 0.50x0.50 inches)#100=0.002000  (safe Z)
-#101=-0.002000  (drill depth)
-(---------------------------------)
-G17 G20 G90 G64 P0.003 M3 S3000 M7 F1
-G81 X0.100000 Y0.225000 Z#101 R#100
-G81 X0.100000 Y0.325000 Z#101 R#100
-G81 X0.400000 Y0.325000 Z#101 R#100
-G81 X0.400000 Y0.225000 Z#101 R#100
-M5 M9 M2
-(end, total distance 12.70mm = 0.50in)
Index: ref/netlist.gcode/netlist.gcode.group-1.cnc
===================================================================
--- ref/netlist.gcode/netlist.gcode.group-1.cnc	(revision 28443)
+++ ref/netlist.gcode/netlist.gcode.group-1.cnc	(nonexistent)
@@ -1,82 +0,0 @@
-(Created by G-code exporter)
-(600 dpi)
-(Unit: inch)
-(Board size: 0.50x0.50 inches)#100=0.002000  (safe Z)
-#101=-0.000050  (cutting depth)
-(---------------------------------)
-G17 G20 G90 G64 P0.003 M3 S3000 M7 F1
-G0 Z#100
-(polygon 1)
-G0 X0.060000 Y0.365000    (start point)
-G1 Z#101
-G1 X0.060000 Y0.283333
-G1 X0.141667 Y0.283333
-G1 X0.141667 Y0.365000
-G1 X0.060000 Y0.365000
-G0 Z#100
-(polygon end, distance 0.33)
-(polygon 2)
-G0 X0.393333 Y0.365000    (start point)
-G1 Z#101
-G1 X0.383333 Y0.361667
-G1 X0.363333 Y0.341667
-G1 X0.360000 Y0.328333
-G1 X0.360000 Y0.320000
-G1 X0.363333 Y0.306667
-G1 X0.383333 Y0.286667
-G1 X0.396667 Y0.283333
-G1 X0.405000 Y0.283333
-G1 X0.418333 Y0.286667
-G1 X0.438333 Y0.306667
-G1 X0.441667 Y0.320000
-G1 X0.441667 Y0.328333
-G1 X0.438333 Y0.341667
-G1 X0.418333 Y0.361667
-G1 X0.405000 Y0.365000
-G1 X0.393333 Y0.365000
-G0 Z#100
-(polygon end, distance 0.26)
-(polygon 3)
-G0 X0.093333 Y0.265000    (start point)
-G1 Z#101
-G1 X0.083333 Y0.261667
-G1 X0.063333 Y0.241667
-G1 X0.060000 Y0.228333
-G1 X0.060000 Y0.220000
-G1 X0.063333 Y0.206667
-G1 X0.083333 Y0.186667
-G1 X0.096667 Y0.183333
-G1 X0.105000 Y0.183333
-G1 X0.118333 Y0.186667
-G1 X0.138333 Y0.206667
-G1 X0.141667 Y0.220000
-G1 X0.141667 Y0.228333
-G1 X0.138333 Y0.241667
-G1 X0.118333 Y0.261667
-G1 X0.105000 Y0.265000
-G1 X0.093333 Y0.265000
-G0 Z#100
-(polygon end, distance 0.26)
-(polygon 4)
-G0 X0.393333 Y0.265000    (start point)
-G1 Z#101
-G1 X0.383333 Y0.261667
-G1 X0.363333 Y0.241667
-G1 X0.360000 Y0.228333
-G1 X0.360000 Y0.220000
-G1 X0.363333 Y0.206667
-G1 X0.383333 Y0.186667
-G1 X0.396667 Y0.183333
-G1 X0.405000 Y0.183333
-G1 X0.418333 Y0.186667
-G1 X0.438333 Y0.206667
-G1 X0.441667 Y0.220000
-G1 X0.441667 Y0.228333
-G1 X0.438333 Y0.241667
-G1 X0.418333 Y0.261667
-G1 X0.405000 Y0.265000
-G1 X0.393333 Y0.265000
-G0 Z#100
-(polygon end, distance 0.26)
-(end, total distance 27.85mm = 1.10in)
-M5 M9 M2
Index: ref/elem_sides_trh.gcode/elem_sides_trh.gcode.group-1.cnc
===================================================================
--- ref/elem_sides_trh.gcode/elem_sides_trh.gcode.group-1.cnc	(revision 28443)
+++ ref/elem_sides_trh.gcode/elem_sides_trh.gcode.group-1.cnc	(nonexistent)
@@ -1,70 +0,0 @@
-(Created by G-code exporter)
-(600 dpi)
-(Unit: inch)
-(Board size: 0.50x0.50 inches)#100=0.002000  (safe Z)
-#101=-0.000050  (cutting depth)
-(---------------------------------)
-G17 G20 G90 G64 P0.003 M3 S3000 M7 F1
-G0 Z#100
-(polygon 1)
-G0 X0.060000 Y0.390000    (start point)
-G1 Z#101
-G1 X0.060000 Y0.308333
-G1 X0.141667 Y0.308333
-G1 X0.141667 Y0.390000
-G1 X0.060000 Y0.390000
-G0 Z#100
-(polygon end, distance 0.33)
-(polygon 2)
-G0 X0.393333 Y0.390000    (start point)
-G1 Z#101
-G1 X0.383333 Y0.386667
-G1 X0.363333 Y0.366667
-G1 X0.360000 Y0.353333
-G1 X0.360000 Y0.345000
-G1 X0.363333 Y0.331667
-G1 X0.383333 Y0.311667
-G1 X0.396667 Y0.308333
-G1 X0.405000 Y0.308333
-G1 X0.418333 Y0.311667
-G1 X0.438333 Y0.331667
-G1 X0.441667 Y0.345000
-G1 X0.441667 Y0.353333
-G1 X0.438333 Y0.366667
-G1 X0.418333 Y0.386667
-G1 X0.405000 Y0.390000
-G1 X0.393333 Y0.390000
-G0 Z#100
-(polygon end, distance 0.26)
-(polygon 3)
-G0 X0.060000 Y0.190000    (start point)
-G1 Z#101
-G1 X0.060000 Y0.108333
-G1 X0.141667 Y0.108333
-G1 X0.141667 Y0.190000
-G1 X0.060000 Y0.190000
-G0 Z#100
-(polygon end, distance 0.33)
-(polygon 4)
-G0 X0.393333 Y0.190000    (start point)
-G1 Z#101
-G1 X0.383333 Y0.186667
-G1 X0.363333 Y0.166667
-G1 X0.360000 Y0.153333
-G1 X0.360000 Y0.145000
-G1 X0.363333 Y0.131667
-G1 X0.383333 Y0.111667
-G1 X0.396667 Y0.108333
-G1 X0.405000 Y0.108333
-G1 X0.418333 Y0.111667
-G1 X0.438333 Y0.131667
-G1 X0.441667 Y0.145000
-G1 X0.441667 Y0.153333
-G1 X0.438333 Y0.166667
-G1 X0.418333 Y0.186667
-G1 X0.405000 Y0.190000
-G1 X0.393333 Y0.190000
-G0 Z#100
-(polygon end, distance 0.26)
-(end, total distance 29.63mm = 1.17in)
-M5 M9 M2
Index: ref/elem_sides_trh.gcode/elem_sides_trh.gcode.top.cnc
===================================================================
--- ref/elem_sides_trh.gcode/elem_sides_trh.gcode.top.cnc	(revision 28443)
+++ ref/elem_sides_trh.gcode/elem_sides_trh.gcode.top.cnc	(nonexistent)
@@ -1,70 +0,0 @@
-(Created by G-code exporter)
-(600 dpi)
-(Unit: inch)
-(Board size: 0.50x0.50 inches)#100=0.002000  (safe Z)
-#101=-0.000050  (cutting depth)
-(---------------------------------)
-G17 G20 G90 G64 P0.003 M3 S3000 M7 F1
-G0 Z#100
-(polygon 1)
-G0 X0.060000 Y0.390000    (start point)
-G1 Z#101
-G1 X0.060000 Y0.308333
-G1 X0.141667 Y0.308333
-G1 X0.141667 Y0.390000
-G1 X0.060000 Y0.390000
-G0 Z#100
-(polygon end, distance 0.33)
-(polygon 2)
-G0 X0.393333 Y0.390000    (start point)
-G1 Z#101
-G1 X0.383333 Y0.386667
-G1 X0.363333 Y0.366667
-G1 X0.360000 Y0.353333
-G1 X0.360000 Y0.345000
-G1 X0.363333 Y0.331667
-G1 X0.383333 Y0.311667
-G1 X0.396667 Y0.308333
-G1 X0.405000 Y0.308333
-G1 X0.418333 Y0.311667
-G1 X0.438333 Y0.331667
-G1 X0.441667 Y0.345000
-G1 X0.441667 Y0.353333
-G1 X0.438333 Y0.366667
-G1 X0.418333 Y0.386667
-G1 X0.405000 Y0.390000
-G1 X0.393333 Y0.390000
-G0 Z#100
-(polygon end, distance 0.26)
-(polygon 3)
-G0 X0.060000 Y0.190000    (start point)
-G1 Z#101
-G1 X0.060000 Y0.108333
-G1 X0.141667 Y0.108333
-G1 X0.141667 Y0.190000
-G1 X0.060000 Y0.190000
-G0 Z#100
-(polygon end, distance 0.33)
-(polygon 4)
-G0 X0.393333 Y0.190000    (start point)
-G1 Z#101
-G1 X0.383333 Y0.186667
-G1 X0.363333 Y0.166667
-G1 X0.360000 Y0.153333
-G1 X0.360000 Y0.145000
-G1 X0.363333 Y0.131667
-G1 X0.383333 Y0.111667
-G1 X0.396667 Y0.108333
-G1 X0.405000 Y0.108333
-G1 X0.418333 Y0.111667
-G1 X0.438333 Y0.131667
-G1 X0.441667 Y0.145000
-G1 X0.441667 Y0.153333
-G1 X0.438333 Y0.166667
-G1 X0.418333 Y0.186667
-G1 X0.405000 Y0.190000
-G1 X0.393333 Y0.190000
-G0 Z#100
-(polygon end, distance 0.26)
-(end, total distance 29.63mm = 1.17in)
-M5 M9 M2
Index: ref/elem_sides_trh.gcode/elem_sides_trh.gcode.bottom.cnc
===================================================================
--- ref/elem_sides_trh.gcode/elem_sides_trh.gcode.bottom.cnc	(revision 28443)
+++ ref/elem_sides_trh.gcode/elem_sides_trh.gcode.bottom.cnc	(nonexistent)
@@ -1,70 +0,0 @@
-(Created by G-code exporter)
-(600 dpi)
-(Unit: inch)
-(Board size: 0.50x0.50 inches)#100=0.002000  (safe Z)
-#101=-0.000050  (cutting depth)
-(---------------------------------)
-G17 G20 G90 G64 P0.003 M3 S3000 M7 F1
-G0 Z#100
-(polygon 1)
-G0 X0.091667 Y0.390000    (start point)
-G1 Z#101
-G1 X0.081667 Y0.386667
-G1 X0.061667 Y0.366667
-G1 X0.058333 Y0.353333
-G1 X0.058333 Y0.345000
-G1 X0.061667 Y0.331667
-G1 X0.081667 Y0.311667
-G1 X0.095000 Y0.308333
-G1 X0.103333 Y0.308333
-G1 X0.116667 Y0.311667
-G1 X0.136667 Y0.331667
-G1 X0.140000 Y0.345000
-G1 X0.140000 Y0.353333
-G1 X0.136667 Y0.366667
-G1 X0.116667 Y0.386667
-G1 X0.103333 Y0.390000
-G1 X0.091667 Y0.390000
-G0 Z#100
-(polygon end, distance 0.26)
-(polygon 2)
-G0 X0.358333 Y0.390000    (start point)
-G1 Z#101
-G1 X0.358333 Y0.308333
-G1 X0.440000 Y0.308333
-G1 X0.440000 Y0.390000
-G1 X0.358333 Y0.390000
-G0 Z#100
-(polygon end, distance 0.33)
-(polygon 3)
-G0 X0.091667 Y0.190000    (start point)
-G1 Z#101
-G1 X0.081667 Y0.186667
-G1 X0.061667 Y0.166667
-G1 X0.058333 Y0.153333
-G1 X0.058333 Y0.145000
-G1 X0.061667 Y0.131667
-G1 X0.081667 Y0.111667
-G1 X0.095000 Y0.108333
-G1 X0.103333 Y0.108333
-G1 X0.116667 Y0.111667
-G1 X0.136667 Y0.131667
-G1 X0.140000 Y0.145000
-G1 X0.140000 Y0.153333
-G1 X0.136667 Y0.166667
-G1 X0.116667 Y0.186667
-G1 X0.103333 Y0.190000
-G1 X0.091667 Y0.190000
-G0 Z#100
-(polygon end, distance 0.26)
-(polygon 4)
-G0 X0.358333 Y0.190000    (start point)
-G1 Z#101
-G1 X0.358333 Y0.108333
-G1 X0.440000 Y0.108333
-G1 X0.440000 Y0.190000
-G1 X0.358333 Y0.190000
-G0 Z#100
-(polygon end, distance 0.33)
-(end, total distance 29.63mm = 1.17in)
-M5 M9 M2
Index: ref/elem_sides_trh.gcode/elem_sides_trh.gcode.drill.cnc
===================================================================
--- ref/elem_sides_trh.gcode/elem_sides_trh.gcode.drill.cnc	(revision 28443)
+++ ref/elem_sides_trh.gcode/elem_sides_trh.gcode.drill.cnc	(nonexistent)
@@ -1,13 +0,0 @@
-(Created by G-code exporter)
-(drill file: 4 drills)
-(Unit: inch)
-(Board size: 0.50x0.50 inches)#100=0.002000  (safe Z)
-#101=-0.002000  (drill depth)
-(---------------------------------)
-G17 G20 G90 G64 P0.003 M3 S3000 M7 F1
-G81 X0.100000 Y0.150000 Z#101 R#100
-G81 X0.100000 Y0.350000 Z#101 R#100
-G81 X0.400000 Y0.350000 Z#101 R#100
-G81 X0.400000 Y0.150000 Z#101 R#100
-M5 M9 M2
-(end, total distance 17.78mm = 0.70in)
Index: ref/poly_rect.gcode/poly_rect.gcode.top.cnc
===================================================================
--- ref/poly_rect.gcode/poly_rect.gcode.top.cnc	(revision 28443)
+++ ref/poly_rect.gcode/poly_rect.gcode.top.cnc	(nonexistent)
@@ -1,46 +0,0 @@
-(Created by G-code exporter)
-(600 dpi)
-(Unit: inch)
-(Board size: 0.50x0.50 inches)#100=0.002000  (safe Z)
-#101=-0.000050  (cutting depth)
-(---------------------------------)
-G17 G20 G90 G64 P0.003 M3 S3000 M7 F1
-G0 Z#100
-(polygon 1)
-G0 X0.050000 Y0.475000    (start point)
-G1 Z#101
-G1 X0.050000 Y0.048333
-G1 X0.076667 Y0.048333
-G1 X0.076667 Y0.475000
-G1 X0.050000 Y0.475000
-G0 Z#100
-(polygon end, distance 0.91)
-(polygon 2)
-G0 X0.125000 Y0.475000    (start point)
-G1 Z#101
-G1 X0.125000 Y0.448333
-G1 X0.476667 Y0.448333
-G1 X0.476667 Y0.475000
-G1 X0.125000 Y0.475000
-G0 Z#100
-(polygon end, distance 0.76)
-(polygon 3)
-G0 X0.125000 Y0.425000    (start point)
-G1 Z#101
-G1 X0.125000 Y0.048333
-G1 X0.401667 Y0.048333
-G1 X0.401667 Y0.425000
-G1 X0.125000 Y0.425000
-G0 Z#100
-(polygon end, distance 1.31)
-(polygon 4)
-G0 X0.425000 Y0.075000    (start point)
-G1 Z#101
-G1 X0.425000 Y0.048333
-G1 X0.451667 Y0.048333
-G1 X0.451667 Y0.075000
-G1 X0.425000 Y0.075000
-G0 Z#100
-(polygon end, distance 0.11)
-(end, total distance 78.15mm = 3.08in)
-M5 M9 M2
Index: ref/arc_f_clear.gcode/arc_f_clear.gcode.top.cnc
===================================================================
--- ref/arc_f_clear.gcode/arc_f_clear.gcode.top.cnc	(revision 28443)
+++ ref/arc_f_clear.gcode/arc_f_clear.gcode.top.cnc	(nonexistent)
@@ -1,159 +0,0 @@
-(Created by G-code exporter)
-(600 dpi)
-(Unit: inch)
-(Board size: 0.50x0.50 inches)#100=0.002000  (safe Z)
-#101=-0.000050  (cutting depth)
-(---------------------------------)
-G17 G20 G90 G64 P0.003 M3 S3000 M7 F1
-G0 Z#100
-(polygon 1)
-G0 X0.245000 Y0.430000    (start point)
-G1 Z#101
-G1 X0.220000 Y0.426667
-G1 X0.203333 Y0.421667
-G1 X0.190000 Y0.415000
-G1 X0.183333 Y0.406667
-G1 X0.178333 Y0.395000
-G1 X0.168333 Y0.393333
-G1 X0.158333 Y0.393333
-G1 X0.138333 Y0.388333
-G1 X0.110000 Y0.375000
-G1 X0.083333 Y0.350000
-G1 X0.025000 Y0.350000
-G1 X0.025000 Y0.023333
-G1 X0.476667 Y0.023333
-G1 X0.476667 Y0.350000
-G1 X0.385000 Y0.350000
-G1 X0.373333 Y0.370000
-G1 X0.348333 Y0.395000
-G1 X0.325000 Y0.410000
-G1 X0.293333 Y0.423333
-G1 X0.271667 Y0.428333
-G1 X0.245000 Y0.430000
-G0 Z#100
-(polygon end, distance 1.61)
-(polygon 2)
-G0 X0.236667 Y0.366667    (start point)
-G1 Z#101
-G1 X0.225000 Y0.363333
-G1 X0.210000 Y0.360000
-G1 X0.195000 Y0.363333
-G1 X0.183333 Y0.353333
-G1 X0.161667 Y0.350000
-G1 X0.303333 Y0.350000
-G1 X0.296667 Y0.355000
-G1 X0.278333 Y0.363333
-G1 X0.261667 Y0.366667
-G1 X0.236667 Y0.366667
-G0 Z#100
-(polygon end, distance 0.29)
-(polygon 3)
-G0 X0.055000 Y0.286667    (start point)
-G1 Z#101
-G1 X0.051667 Y0.276667
-G1 X0.053333 Y0.246667
-G1 X0.061667 Y0.218333
-G1 X0.076667 Y0.190000
-G1 X0.095000 Y0.166667
-G1 X0.116667 Y0.150000
-G1 X0.128333 Y0.143333
-G1 X0.148333 Y0.133333
-G1 X0.178333 Y0.125000
-G1 X0.206667 Y0.125000
-G1 X0.220000 Y0.131667
-G1 X0.225000 Y0.145000
-G1 X0.225000 Y0.153333
-G1 X0.220000 Y0.166667
-G1 X0.206667 Y0.173333
-G1 X0.175000 Y0.176667
-G1 X0.151667 Y0.186667
-G1 X0.135000 Y0.198333
-G1 X0.123333 Y0.210000
-G1 X0.113333 Y0.225000
-G1 X0.105000 Y0.243333
-G1 X0.100000 Y0.263333
-G1 X0.100000 Y0.278333
-G1 X0.098333 Y0.283333
-G1 X0.088333 Y0.275000
-G1 X0.088333 Y0.258333
-G1 X0.093333 Y0.238333
-G1 X0.103333 Y0.216667
-G1 X0.115000 Y0.198333
-G1 X0.131667 Y0.183333
-G1 X0.153333 Y0.171667
-G1 X0.175000 Y0.163333
-G1 X0.200000 Y0.161667
-G1 X0.206667 Y0.158333
-G1 X0.211667 Y0.150000
-G1 X0.210000 Y0.143333
-G1 X0.201667 Y0.138333
-G1 X0.171667 Y0.141667
-G1 X0.138333 Y0.155000
-G1 X0.115000 Y0.170000
-G1 X0.096667 Y0.188333
-G1 X0.081667 Y0.211667
-G1 X0.071667 Y0.235000
-G1 X0.068333 Y0.248333
-G1 X0.065000 Y0.275000
-G1 X0.058333 Y0.283333
-G1 X0.058333 Y0.286667
-G1 X0.055000 Y0.286667
-G0 Z#100
-(polygon end, distance 0.95)
-(polygon 4)
-G0 X0.293333 Y0.275000    (start point)
-G1 Z#101
-G1 X0.278333 Y0.268333
-G1 X0.270000 Y0.263333
-G1 X0.265000 Y0.253333
-G1 X0.265000 Y0.246667
-G1 X0.258333 Y0.241667
-G1 X0.251667 Y0.228333
-G1 X0.251667 Y0.215000
-G1 X0.260000 Y0.196667
-G1 X0.271667 Y0.183333
-G1 X0.290000 Y0.175000
-G1 X0.311667 Y0.175000
-G1 X0.330000 Y0.183333
-G1 X0.343333 Y0.198333
-G1 X0.350000 Y0.215000
-G1 X0.350000 Y0.233333
-G1 X0.343333 Y0.250000
-G1 X0.328333 Y0.266667
-G1 X0.306667 Y0.275000
-G1 X0.293333 Y0.275000
-G0 Z#100
-(polygon end, distance 0.31)
-(polygon 5)
-G0 X0.298333 Y0.260000    (start point)
-G1 Z#101
-G1 X0.288333 Y0.256667
-G1 X0.280000 Y0.251667
-G1 X0.278333 Y0.243333
-G1 X0.283333 Y0.235000
-G1 X0.290000 Y0.233333
-G1 X0.296667 Y0.236667
-G1 X0.306667 Y0.236667
-G1 X0.313333 Y0.230000
-G1 X0.313333 Y0.218333
-G1 X0.306667 Y0.211667
-G1 X0.295000 Y0.211667
-G1 X0.288333 Y0.218333
-G1 X0.288333 Y0.226667
-G1 X0.280000 Y0.235000
-G1 X0.273333 Y0.235000
-G1 X0.265000 Y0.226667
-G1 X0.266667 Y0.215000
-G1 X0.276667 Y0.200000
-G1 X0.291667 Y0.190000
-G1 X0.310000 Y0.190000
-G1 X0.325000 Y0.200000
-G1 X0.335000 Y0.215000
-G1 X0.335000 Y0.233333
-G1 X0.325000 Y0.248333
-G1 X0.310000 Y0.258333
-G1 X0.298333 Y0.260000
-G0 Z#100
-(polygon end, distance 0.32)
-(end, total distance 88.68mm = 3.49in)
-M5 M9 M2