Index: BNC_LAY.fp
===================================================================
--- BNC_LAY.fp	(nonexistent)
+++ BNC_LAY.fp	(revision 293)
@@ -0,0 +1,11 @@
+Element(0x00 "right angle BNC" "" "BNC_LAY" 200 0 3 100 0x00)
+(
+	ElementLine(-60 -290 490 -290 10)
+	ElementLine(490 -290 490 290 10)
+	ElementLine(490 290 -60 290 10)
+	ElementLine(-60 290 -60 -290 10)
+	Pin(0 0 60 35 "1" 0x101)
+	Pin(0 -100 60 35 "2" 0x01)
+	Pin(200 -200 100 81 "m1" 0x01)
+	Pin(200 200 100 81 "m2" 0x01)
+)
Index: DB15F.fp
===================================================================
--- DB15F.fp	(nonexistent)
+++ DB15F.fp	(revision 293)
@@ -0,0 +1,68 @@
+Element(0x00 "DSUB connector, female/male" "" "DB15F" 1000 2026 1 150 0x00)
+(
+	# Gehaeuse (schmaler Kasten incl. Bohrungen)
+	ElementLine(635 880 665 880 10)
+	ElementLine(665 880 665 2416 10)
+	ElementLine(665 2416 635 2416 10)
+	ElementLine(635 2416 635 880 10)
+	ElementLine(635 940 665 940 10)
+	ElementLine(635 1060 665 1060 10)
+	ElementLine(635 2356 665 2356 10)
+	ElementLine(635 2236 665 2236 10)
+	# Gehaeuse (aeusserer Kasten)
+	# This part of the connector normally hangs off the circuit board,
+	# so it is confusing to actually mark it on the silkscreen
+	# define(`X1', `eval(BASEX-PANEL_DISTANCE-260)')
+	# define(`Y1', `eval(PY1-100)')
+	# define(`X2', `eval(BASEX-PANEL_DISTANCE)')
+	# define(`Y2', `eval(PY2+100)')
+	# ElementLine(X1 Y1 X2 Y1 20)
+	# ElementLine(X2 Y1 X2 Y2 10)
+	# ElementLine(X2 Y2 X1 Y2 20)
+	# ElementLine(X1 Y2 X1 Y1 20)
+	# Gehaeuse (innerer Kasten)
+	ElementLine(665 1110 770 1110 20)
+	ElementLine(770 1110 770 2186 20)
+	ElementLine(770 2186 665 2186 20)
+	ElementLine(665 2186 665 1110 10)
+	# Pins
+		# Pin 1
+		Pin(1056 2026 60 35 "1" 0x101)
+		ElementLine(1016 2026 770 2026 20)
+		# Plazierungsmarkierung == PIN 1
+		# Changed PY1 to PY2 13-Dec-1999 LRD
+		Mark(1056 2026)
+		# Remainder of the first row
+			Pin(1056 1918 60 35 "2" 0x01)
+			ElementLine(1016 1918 770 1918 20)
+			Pin(1056 1810 60 35 "3" 0x01)
+			ElementLine(1016 1810 770 1810 20)
+			Pin(1056 1702 60 35 "4" 0x01)
+			ElementLine(1016 1702 770 1702 20)
+			Pin(1056 1594 60 35 "5" 0x01)
+			ElementLine(1016 1594 770 1594 20)
+			Pin(1056 1486 60 35 "6" 0x01)
+			ElementLine(1016 1486 770 1486 20)
+			Pin(1056 1378 60 35 "7" 0x01)
+			ElementLine(1016 1378 770 1378 20)
+			Pin(1056 1270 60 35 "8" 0x01)
+			ElementLine(1016 1270 770 1270 20)
+		# Second row
+			Pin(944 1972 60 35 "9" 0x01)
+			ElementLine(904 1972 770 1972 20)
+			Pin(944 1864 60 35 "10" 0x01)
+			ElementLine(904 1864 770 1864 20)
+			Pin(944 1756 60 35 "11" 0x01)
+			ElementLine(904 1756 770 1756 20)
+			Pin(944 1648 60 35 "12" 0x01)
+			ElementLine(904 1648 770 1648 20)
+			Pin(944 1540 60 35 "13" 0x01)
+			ElementLine(904 1540 770 1540 20)
+			Pin(944 1432 60 35 "14" 0x01)
+			ElementLine(904 1432 770 1432 20)
+			Pin(944 1324 60 35 "15" 0x01)
+			ElementLine(904 1324 770 1324 20)
+	# Befestigungsbohrung
+	Pin(1000  1000 250 125 "C1" 0x01)
+	Pin(1000 2296 250 125 "C2" 0x01)
+)
Index: DB15M.fp
===================================================================
--- DB15M.fp	(nonexistent)
+++ DB15M.fp	(revision 293)
@@ -0,0 +1,67 @@
+Element(0x00 "DSUB connector, female/male" "" "DB15M" 1000 2026 1 150 0x00)
+(
+	# Gehaeuse (schmaler Kasten incl. Bohrungen)
+	ElementLine(635 880 665 880 10)
+	ElementLine(665 880 665 2416 10)
+	ElementLine(665 2416 635 2416 10)
+	ElementLine(635 2416 635 880 10)
+	ElementLine(635 940 665 940 10)
+	ElementLine(635 1060 665 1060 10)
+	ElementLine(635 2356 665 2356 10)
+	ElementLine(635 2236 665 2236 10)
+	# Gehaeuse (aeusserer Kasten)
+	# This part of the connector normally hangs off the circuit board,
+	# so it is confusing to actually mark it on the silkscreen
+	# define(`X1', `eval(BASEX-PANEL_DISTANCE-260)')
+	# define(`Y1', `eval(PY1-100)')
+	# define(`X2', `eval(BASEX-PANEL_DISTANCE)')
+	# define(`Y2', `eval(PY2+100)')
+	# ElementLine(X1 Y1 X2 Y1 20)
+	# ElementLine(X2 Y1 X2 Y2 10)
+	# ElementLine(X2 Y2 X1 Y2 20)
+	# ElementLine(X1 Y2 X1 Y1 20)
+	# Gehaeuse (innerer Kasten)
+	ElementLine(665 1110 770 1110 20)
+	ElementLine(770 1110 770 2186 20)
+	ElementLine(770 2186 665 2186 20)
+	ElementLine(665 2186 665 1110 10)
+	# Pins
+		# First row
+			Pin(1056 1270 60 35 "1" 0x101)
+			ElementLine(1016 1270 770 1270 20)
+			Pin(1056 1378 60 35 "2" 0x01)
+			ElementLine(1016 1378 770 1378 20)
+			Pin(1056 1486 60 35 "3" 0x01)
+			ElementLine(1016 1486 770 1486 20)
+			Pin(1056 1594 60 35 "4" 0x01)
+			ElementLine(1016 1594 770 1594 20)
+			Pin(1056 1702 60 35 "5" 0x01)
+			ElementLine(1016 1702 770 1702 20)
+			Pin(1056 1810 60 35 "6" 0x01)
+			ElementLine(1016 1810 770 1810 20)
+			Pin(1056 1918 60 35 "7" 0x01)
+			ElementLine(1016 1918 770 1918 20)
+		# Last pin in first row
+		Pin(1056 2026 60 35 "8" 0x01)
+		ElementLine(1016 2026 770 2026 20)
+		# Second row
+			Pin(944 1324 60 35 "9" 0x01)
+			ElementLine(904 1324 770 1324 20)
+			Pin(944 1432 60 35 "10" 0x01)
+			ElementLine(904 1432 770 1432 20)
+			Pin(944 1540 60 35 "11" 0x01)
+			ElementLine(904 1540 770 1540 20)
+			Pin(944 1648 60 35 "12" 0x01)
+			ElementLine(904 1648 770 1648 20)
+			Pin(944 1756 60 35 "13" 0x01)
+			ElementLine(904 1756 770 1756 20)
+			Pin(944 1864 60 35 "14" 0x01)
+			ElementLine(904 1864 770 1864 20)
+			Pin(944 1972 60 35 "15" 0x01)
+			ElementLine(904 1972 770 1972 20)
+		# Plazierungsmarkierung == PIN 1
+		Mark(1050 1270)
+	# Befestigungsbohrung
+	Pin(1000  1000 250 125 "C1" 0x01)
+	Pin(1000 2296 250 125 "C2" 0x01)
+)
Index: DB25F.fp
===================================================================
--- DB25F.fp	(nonexistent)
+++ DB25F.fp	(revision 293)
@@ -0,0 +1,88 @@
+Element(0x00 "DSUB connector, female/male" "" "DB25F" 1000 2566 1 150 0x00)
+(
+	# Gehaeuse (schmaler Kasten incl. Bohrungen)
+	ElementLine(635 880 665 880 10)
+	ElementLine(665 880 665 2956 10)
+	ElementLine(665 2956 635 2956 10)
+	ElementLine(635 2956 635 880 10)
+	ElementLine(635 940 665 940 10)
+	ElementLine(635 1060 665 1060 10)
+	ElementLine(635 2896 665 2896 10)
+	ElementLine(635 2776 665 2776 10)
+	# Gehaeuse (aeusserer Kasten)
+	# This part of the connector normally hangs off the circuit board,
+	# so it is confusing to actually mark it on the silkscreen
+	# define(`X1', `eval(BASEX-PANEL_DISTANCE-260)')
+	# define(`Y1', `eval(PY1-100)')
+	# define(`X2', `eval(BASEX-PANEL_DISTANCE)')
+	# define(`Y2', `eval(PY2+100)')
+	# ElementLine(X1 Y1 X2 Y1 20)
+	# ElementLine(X2 Y1 X2 Y2 10)
+	# ElementLine(X2 Y2 X1 Y2 20)
+	# ElementLine(X1 Y2 X1 Y1 20)
+	# Gehaeuse (innerer Kasten)
+	ElementLine(665 1110 770 1110 20)
+	ElementLine(770 1110 770 2726 20)
+	ElementLine(770 2726 665 2726 20)
+	ElementLine(665 2726 665 1110 10)
+	# Pins
+		# Pin 1
+		Pin(1056 2566 60 35 "1" 0x101)
+		ElementLine(1016 2566 770 2566 20)
+		# Plazierungsmarkierung == PIN 1
+		# Changed PY1 to PY2 13-Dec-1999 LRD
+		Mark(1056 2566)
+		# Remainder of the first row
+			Pin(1056 2458 60 35 "2" 0x01)
+			ElementLine(1016 2458 770 2458 20)
+			Pin(1056 2350 60 35 "3" 0x01)
+			ElementLine(1016 2350 770 2350 20)
+			Pin(1056 2242 60 35 "4" 0x01)
+			ElementLine(1016 2242 770 2242 20)
+			Pin(1056 2134 60 35 "5" 0x01)
+			ElementLine(1016 2134 770 2134 20)
+			Pin(1056 2026 60 35 "6" 0x01)
+			ElementLine(1016 2026 770 2026 20)
+			Pin(1056 1918 60 35 "7" 0x01)
+			ElementLine(1016 1918 770 1918 20)
+			Pin(1056 1810 60 35 "8" 0x01)
+			ElementLine(1016 1810 770 1810 20)
+			Pin(1056 1702 60 35 "9" 0x01)
+			ElementLine(1016 1702 770 1702 20)
+			Pin(1056 1594 60 35 "10" 0x01)
+			ElementLine(1016 1594 770 1594 20)
+			Pin(1056 1486 60 35 "11" 0x01)
+			ElementLine(1016 1486 770 1486 20)
+			Pin(1056 1378 60 35 "12" 0x01)
+			ElementLine(1016 1378 770 1378 20)
+			Pin(1056 1270 60 35 "13" 0x01)
+			ElementLine(1016 1270 770 1270 20)
+		# Second row
+			Pin(944 2512 60 35 "14" 0x01)
+			ElementLine(904 2512 770 2512 20)
+			Pin(944 2404 60 35 "15" 0x01)
+			ElementLine(904 2404 770 2404 20)
+			Pin(944 2296 60 35 "16" 0x01)
+			ElementLine(904 2296 770 2296 20)
+			Pin(944 2188 60 35 "17" 0x01)
+			ElementLine(904 2188 770 2188 20)
+			Pin(944 2080 60 35 "18" 0x01)
+			ElementLine(904 2080 770 2080 20)
+			Pin(944 1972 60 35 "19" 0x01)
+			ElementLine(904 1972 770 1972 20)
+			Pin(944 1864 60 35 "20" 0x01)
+			ElementLine(904 1864 770 1864 20)
+			Pin(944 1756 60 35 "21" 0x01)
+			ElementLine(904 1756 770 1756 20)
+			Pin(944 1648 60 35 "22" 0x01)
+			ElementLine(904 1648 770 1648 20)
+			Pin(944 1540 60 35 "23" 0x01)
+			ElementLine(904 1540 770 1540 20)
+			Pin(944 1432 60 35 "24" 0x01)
+			ElementLine(904 1432 770 1432 20)
+			Pin(944 1324 60 35 "25" 0x01)
+			ElementLine(904 1324 770 1324 20)
+	# Befestigungsbohrung
+	Pin(1000  1000 250 125 "C1" 0x01)
+	Pin(1000 2836 250 125 "C2" 0x01)
+)
Index: DB25M.fp
===================================================================
--- DB25M.fp	(nonexistent)
+++ DB25M.fp	(revision 293)
@@ -0,0 +1,87 @@
+Element(0x00 "DSUB connector, female/male" "" "DB25M" 1000 2566 1 150 0x00)
+(
+	# Gehaeuse (schmaler Kasten incl. Bohrungen)
+	ElementLine(635 880 665 880 10)
+	ElementLine(665 880 665 2956 10)
+	ElementLine(665 2956 635 2956 10)
+	ElementLine(635 2956 635 880 10)
+	ElementLine(635 940 665 940 10)
+	ElementLine(635 1060 665 1060 10)
+	ElementLine(635 2896 665 2896 10)
+	ElementLine(635 2776 665 2776 10)
+	# Gehaeuse (aeusserer Kasten)
+	# This part of the connector normally hangs off the circuit board,
+	# so it is confusing to actually mark it on the silkscreen
+	# define(`X1', `eval(BASEX-PANEL_DISTANCE-260)')
+	# define(`Y1', `eval(PY1-100)')
+	# define(`X2', `eval(BASEX-PANEL_DISTANCE)')
+	# define(`Y2', `eval(PY2+100)')
+	# ElementLine(X1 Y1 X2 Y1 20)
+	# ElementLine(X2 Y1 X2 Y2 10)
+	# ElementLine(X2 Y2 X1 Y2 20)
+	# ElementLine(X1 Y2 X1 Y1 20)
+	# Gehaeuse (innerer Kasten)
+	ElementLine(665 1110 770 1110 20)
+	ElementLine(770 1110 770 2726 20)
+	ElementLine(770 2726 665 2726 20)
+	ElementLine(665 2726 665 1110 10)
+	# Pins
+		# First row
+			Pin(1056 1270 60 35 "1" 0x101)
+			ElementLine(1016 1270 770 1270 20)
+			Pin(1056 1378 60 35 "2" 0x01)
+			ElementLine(1016 1378 770 1378 20)
+			Pin(1056 1486 60 35 "3" 0x01)
+			ElementLine(1016 1486 770 1486 20)
+			Pin(1056 1594 60 35 "4" 0x01)
+			ElementLine(1016 1594 770 1594 20)
+			Pin(1056 1702 60 35 "5" 0x01)
+			ElementLine(1016 1702 770 1702 20)
+			Pin(1056 1810 60 35 "6" 0x01)
+			ElementLine(1016 1810 770 1810 20)
+			Pin(1056 1918 60 35 "7" 0x01)
+			ElementLine(1016 1918 770 1918 20)
+			Pin(1056 2026 60 35 "8" 0x01)
+			ElementLine(1016 2026 770 2026 20)
+			Pin(1056 2134 60 35 "9" 0x01)
+			ElementLine(1016 2134 770 2134 20)
+			Pin(1056 2242 60 35 "10" 0x01)
+			ElementLine(1016 2242 770 2242 20)
+			Pin(1056 2350 60 35 "11" 0x01)
+			ElementLine(1016 2350 770 2350 20)
+			Pin(1056 2458 60 35 "12" 0x01)
+			ElementLine(1016 2458 770 2458 20)
+		# Last pin in first row
+		Pin(1056 2566 60 35 "13" 0x01)
+		ElementLine(1016 2566 770 2566 20)
+		# Second row
+			Pin(944 1324 60 35 "14" 0x01)
+			ElementLine(904 1324 770 1324 20)
+			Pin(944 1432 60 35 "15" 0x01)
+			ElementLine(904 1432 770 1432 20)
+			Pin(944 1540 60 35 "16" 0x01)
+			ElementLine(904 1540 770 1540 20)
+			Pin(944 1648 60 35 "17" 0x01)
+			ElementLine(904 1648 770 1648 20)
+			Pin(944 1756 60 35 "18" 0x01)
+			ElementLine(904 1756 770 1756 20)
+			Pin(944 1864 60 35 "19" 0x01)
+			ElementLine(904 1864 770 1864 20)
+			Pin(944 1972 60 35 "20" 0x01)
+			ElementLine(904 1972 770 1972 20)
+			Pin(944 2080 60 35 "21" 0x01)
+			ElementLine(904 2080 770 2080 20)
+			Pin(944 2188 60 35 "22" 0x01)
+			ElementLine(904 2188 770 2188 20)
+			Pin(944 2296 60 35 "23" 0x01)
+			ElementLine(904 2296 770 2296 20)
+			Pin(944 2404 60 35 "24" 0x01)
+			ElementLine(904 2404 770 2404 20)
+			Pin(944 2512 60 35 "25" 0x01)
+			ElementLine(904 2512 770 2512 20)
+		# Plazierungsmarkierung == PIN 1
+		Mark(1050 1270)
+	# Befestigungsbohrung
+	Pin(1000  1000 250 125 "C1" 0x01)
+	Pin(1000 2836 250 125 "C2" 0x01)
+)
Index: DB37F.fp
===================================================================
--- DB37F.fp	(nonexistent)
+++ DB37F.fp	(revision 293)
@@ -0,0 +1,112 @@
+Element(0x00 "DSUB connector, female/male" "" "DB37F" 1000 3214 1 150 0x00)
+(
+	# Gehaeuse (schmaler Kasten incl. Bohrungen)
+	ElementLine(635 880 665 880 10)
+	ElementLine(665 880 665 3604 10)
+	ElementLine(665 3604 635 3604 10)
+	ElementLine(635 3604 635 880 10)
+	ElementLine(635 940 665 940 10)
+	ElementLine(635 1060 665 1060 10)
+	ElementLine(635 3544 665 3544 10)
+	ElementLine(635 3424 665 3424 10)
+	# Gehaeuse (aeusserer Kasten)
+	# This part of the connector normally hangs off the circuit board,
+	# so it is confusing to actually mark it on the silkscreen
+	# define(`X1', `eval(BASEX-PANEL_DISTANCE-260)')
+	# define(`Y1', `eval(PY1-100)')
+	# define(`X2', `eval(BASEX-PANEL_DISTANCE)')
+	# define(`Y2', `eval(PY2+100)')
+	# ElementLine(X1 Y1 X2 Y1 20)
+	# ElementLine(X2 Y1 X2 Y2 10)
+	# ElementLine(X2 Y2 X1 Y2 20)
+	# ElementLine(X1 Y2 X1 Y1 20)
+	# Gehaeuse (innerer Kasten)
+	ElementLine(665 1110 770 1110 20)
+	ElementLine(770 1110 770 3374 20)
+	ElementLine(770 3374 665 3374 20)
+	ElementLine(665 3374 665 1110 10)
+	# Pins
+		# Pin 1
+		Pin(1056 3214 60 35 "1" 0x101)
+		ElementLine(1016 3214 770 3214 20)
+		# Plazierungsmarkierung == PIN 1
+		# Changed PY1 to PY2 13-Dec-1999 LRD
+		Mark(1056 3214)
+		# Remainder of the first row
+			Pin(1056 3106 60 35 "2" 0x01)
+			ElementLine(1016 3106 770 3106 20)
+			Pin(1056 2998 60 35 "3" 0x01)
+			ElementLine(1016 2998 770 2998 20)
+			Pin(1056 2890 60 35 "4" 0x01)
+			ElementLine(1016 2890 770 2890 20)
+			Pin(1056 2782 60 35 "5" 0x01)
+			ElementLine(1016 2782 770 2782 20)
+			Pin(1056 2674 60 35 "6" 0x01)
+			ElementLine(1016 2674 770 2674 20)
+			Pin(1056 2566 60 35 "7" 0x01)
+			ElementLine(1016 2566 770 2566 20)
+			Pin(1056 2458 60 35 "8" 0x01)
+			ElementLine(1016 2458 770 2458 20)
+			Pin(1056 2350 60 35 "9" 0x01)
+			ElementLine(1016 2350 770 2350 20)
+			Pin(1056 2242 60 35 "10" 0x01)
+			ElementLine(1016 2242 770 2242 20)
+			Pin(1056 2134 60 35 "11" 0x01)
+			ElementLine(1016 2134 770 2134 20)
+			Pin(1056 2026 60 35 "12" 0x01)
+			ElementLine(1016 2026 770 2026 20)
+			Pin(1056 1918 60 35 "13" 0x01)
+			ElementLine(1016 1918 770 1918 20)
+			Pin(1056 1810 60 35 "14" 0x01)
+			ElementLine(1016 1810 770 1810 20)
+			Pin(1056 1702 60 35 "15" 0x01)
+			ElementLine(1016 1702 770 1702 20)
+			Pin(1056 1594 60 35 "16" 0x01)
+			ElementLine(1016 1594 770 1594 20)
+			Pin(1056 1486 60 35 "17" 0x01)
+			ElementLine(1016 1486 770 1486 20)
+			Pin(1056 1378 60 35 "18" 0x01)
+			ElementLine(1016 1378 770 1378 20)
+			Pin(1056 1270 60 35 "19" 0x01)
+			ElementLine(1016 1270 770 1270 20)
+		# Second row
+			Pin(944 3160 60 35 "20" 0x01)
+			ElementLine(904 3160 770 3160 20)
+			Pin(944 3052 60 35 "21" 0x01)
+			ElementLine(904 3052 770 3052 20)
+			Pin(944 2944 60 35 "22" 0x01)
+			ElementLine(904 2944 770 2944 20)
+			Pin(944 2836 60 35 "23" 0x01)
+			ElementLine(904 2836 770 2836 20)
+			Pin(944 2728 60 35 "24" 0x01)
+			ElementLine(904 2728 770 2728 20)
+			Pin(944 2620 60 35 "25" 0x01)
+			ElementLine(904 2620 770 2620 20)
+			Pin(944 2512 60 35 "26" 0x01)
+			ElementLine(904 2512 770 2512 20)
+			Pin(944 2404 60 35 "27" 0x01)
+			ElementLine(904 2404 770 2404 20)
+			Pin(944 2296 60 35 "28" 0x01)
+			ElementLine(904 2296 770 2296 20)
+			Pin(944 2188 60 35 "29" 0x01)
+			ElementLine(904 2188 770 2188 20)
+			Pin(944 2080 60 35 "30" 0x01)
+			ElementLine(904 2080 770 2080 20)
+			Pin(944 1972 60 35 "31" 0x01)
+			ElementLine(904 1972 770 1972 20)
+			Pin(944 1864 60 35 "32" 0x01)
+			ElementLine(904 1864 770 1864 20)
+			Pin(944 1756 60 35 "33" 0x01)
+			ElementLine(904 1756 770 1756 20)
+			Pin(944 1648 60 35 "34" 0x01)
+			ElementLine(904 1648 770 1648 20)
+			Pin(944 1540 60 35 "35" 0x01)
+			ElementLine(904 1540 770 1540 20)
+			Pin(944 1432 60 35 "36" 0x01)
+			ElementLine(904 1432 770 1432 20)
+			Pin(944 1324 60 35 "37" 0x01)
+			ElementLine(904 1324 770 1324 20)
+	# Befestigungsbohrung
+	Pin(1000  1000 250 125 "C1" 0x01)
+	Pin(1000 3484 250 125 "C2" 0x01)
+)
Index: DB37M.fp
===================================================================
--- DB37M.fp	(nonexistent)
+++ DB37M.fp	(revision 293)
@@ -0,0 +1,111 @@
+Element(0x00 "DSUB connector, female/male" "" "DB37M" 1000 3214 1 150 0x00)
+(
+	# Gehaeuse (schmaler Kasten incl. Bohrungen)
+	ElementLine(635 880 665 880 10)
+	ElementLine(665 880 665 3604 10)
+	ElementLine(665 3604 635 3604 10)
+	ElementLine(635 3604 635 880 10)
+	ElementLine(635 940 665 940 10)
+	ElementLine(635 1060 665 1060 10)
+	ElementLine(635 3544 665 3544 10)
+	ElementLine(635 3424 665 3424 10)
+	# Gehaeuse (aeusserer Kasten)
+	# This part of the connector normally hangs off the circuit board,
+	# so it is confusing to actually mark it on the silkscreen
+	# define(`X1', `eval(BASEX-PANEL_DISTANCE-260)')
+	# define(`Y1', `eval(PY1-100)')
+	# define(`X2', `eval(BASEX-PANEL_DISTANCE)')
+	# define(`Y2', `eval(PY2+100)')
+	# ElementLine(X1 Y1 X2 Y1 20)
+	# ElementLine(X2 Y1 X2 Y2 10)
+	# ElementLine(X2 Y2 X1 Y2 20)
+	# ElementLine(X1 Y2 X1 Y1 20)
+	# Gehaeuse (innerer Kasten)
+	ElementLine(665 1110 770 1110 20)
+	ElementLine(770 1110 770 3374 20)
+	ElementLine(770 3374 665 3374 20)
+	ElementLine(665 3374 665 1110 10)
+	# Pins
+		# First row
+			Pin(1056 1270 60 35 "1" 0x101)
+			ElementLine(1016 1270 770 1270 20)
+			Pin(1056 1378 60 35 "2" 0x01)
+			ElementLine(1016 1378 770 1378 20)
+			Pin(1056 1486 60 35 "3" 0x01)
+			ElementLine(1016 1486 770 1486 20)
+			Pin(1056 1594 60 35 "4" 0x01)
+			ElementLine(1016 1594 770 1594 20)
+			Pin(1056 1702 60 35 "5" 0x01)
+			ElementLine(1016 1702 770 1702 20)
+			Pin(1056 1810 60 35 "6" 0x01)
+			ElementLine(1016 1810 770 1810 20)
+			Pin(1056 1918 60 35 "7" 0x01)
+			ElementLine(1016 1918 770 1918 20)
+			Pin(1056 2026 60 35 "8" 0x01)
+			ElementLine(1016 2026 770 2026 20)
+			Pin(1056 2134 60 35 "9" 0x01)
+			ElementLine(1016 2134 770 2134 20)
+			Pin(1056 2242 60 35 "10" 0x01)
+			ElementLine(1016 2242 770 2242 20)
+			Pin(1056 2350 60 35 "11" 0x01)
+			ElementLine(1016 2350 770 2350 20)
+			Pin(1056 2458 60 35 "12" 0x01)
+			ElementLine(1016 2458 770 2458 20)
+			Pin(1056 2566 60 35 "13" 0x01)
+			ElementLine(1016 2566 770 2566 20)
+			Pin(1056 2674 60 35 "14" 0x01)
+			ElementLine(1016 2674 770 2674 20)
+			Pin(1056 2782 60 35 "15" 0x01)
+			ElementLine(1016 2782 770 2782 20)
+			Pin(1056 2890 60 35 "16" 0x01)
+			ElementLine(1016 2890 770 2890 20)
+			Pin(1056 2998 60 35 "17" 0x01)
+			ElementLine(1016 2998 770 2998 20)
+			Pin(1056 3106 60 35 "18" 0x01)
+			ElementLine(1016 3106 770 3106 20)
+		# Last pin in first row
+		Pin(1056 3214 60 35 "19" 0x01)
+		ElementLine(1016 3214 770 3214 20)
+		# Second row
+			Pin(944 1324 60 35 "20" 0x01)
+			ElementLine(904 1324 770 1324 20)
+			Pin(944 1432 60 35 "21" 0x01)
+			ElementLine(904 1432 770 1432 20)
+			Pin(944 1540 60 35 "22" 0x01)
+			ElementLine(904 1540 770 1540 20)
+			Pin(944 1648 60 35 "23" 0x01)
+			ElementLine(904 1648 770 1648 20)
+			Pin(944 1756 60 35 "24" 0x01)
+			ElementLine(904 1756 770 1756 20)
+			Pin(944 1864 60 35 "25" 0x01)
+			ElementLine(904 1864 770 1864 20)
+			Pin(944 1972 60 35 "26" 0x01)
+			ElementLine(904 1972 770 1972 20)
+			Pin(944 2080 60 35 "27" 0x01)
+			ElementLine(904 2080 770 2080 20)
+			Pin(944 2188 60 35 "28" 0x01)
+			ElementLine(904 2188 770 2188 20)
+			Pin(944 2296 60 35 "29" 0x01)
+			ElementLine(904 2296 770 2296 20)
+			Pin(944 2404 60 35 "30" 0x01)
+			ElementLine(904 2404 770 2404 20)
+			Pin(944 2512 60 35 "31" 0x01)
+			ElementLine(904 2512 770 2512 20)
+			Pin(944 2620 60 35 "32" 0x01)
+			ElementLine(904 2620 770 2620 20)
+			Pin(944 2728 60 35 "33" 0x01)
+			ElementLine(904 2728 770 2728 20)
+			Pin(944 2836 60 35 "34" 0x01)
+			ElementLine(904 2836 770 2836 20)
+			Pin(944 2944 60 35 "35" 0x01)
+			ElementLine(904 2944 770 2944 20)
+			Pin(944 3052 60 35 "36" 0x01)
+			ElementLine(904 3052 770 3052 20)
+			Pin(944 3160 60 35 "37" 0x01)
+			ElementLine(904 3160 770 3160 20)
+		# Plazierungsmarkierung == PIN 1
+		Mark(1050 1270)
+	# Befestigungsbohrung
+	Pin(1000  1000 250 125 "C1" 0x01)
+	Pin(1000 3484 250 125 "C2" 0x01)
+)
Index: DB9F.fp
===================================================================
--- DB9F.fp	(nonexistent)
+++ DB9F.fp	(revision 293)
@@ -0,0 +1,56 @@
+Element(0x00 "DSUB connector, female/male" "" "DB9F" 1000 1702 1 150 0x00)
+(
+	# Gehaeuse (schmaler Kasten incl. Bohrungen)
+	ElementLine(635 880 665 880 10)
+	ElementLine(665 880 665 2092 10)
+	ElementLine(665 2092 635 2092 10)
+	ElementLine(635 2092 635 880 10)
+	ElementLine(635 940 665 940 10)
+	ElementLine(635 1060 665 1060 10)
+	ElementLine(635 2032 665 2032 10)
+	ElementLine(635 1912 665 1912 10)
+	# Gehaeuse (aeusserer Kasten)
+	# This part of the connector normally hangs off the circuit board,
+	# so it is confusing to actually mark it on the silkscreen
+	# define(`X1', `eval(BASEX-PANEL_DISTANCE-260)')
+	# define(`Y1', `eval(PY1-100)')
+	# define(`X2', `eval(BASEX-PANEL_DISTANCE)')
+	# define(`Y2', `eval(PY2+100)')
+	# ElementLine(X1 Y1 X2 Y1 20)
+	# ElementLine(X2 Y1 X2 Y2 10)
+	# ElementLine(X2 Y2 X1 Y2 20)
+	# ElementLine(X1 Y2 X1 Y1 20)
+	# Gehaeuse (innerer Kasten)
+	ElementLine(665 1110 770 1110 20)
+	ElementLine(770 1110 770 1862 20)
+	ElementLine(770 1862 665 1862 20)
+	ElementLine(665 1862 665 1110 10)
+	# Pins
+		# Pin 1
+		Pin(1056 1702 60 35 "1" 0x101)
+		ElementLine(1016 1702 770 1702 20)
+		# Plazierungsmarkierung == PIN 1
+		# Changed PY1 to PY2 13-Dec-1999 LRD
+		Mark(1056 1702)
+		# Remainder of the first row
+			Pin(1056 1594 60 35 "2" 0x01)
+			ElementLine(1016 1594 770 1594 20)
+			Pin(1056 1486 60 35 "3" 0x01)
+			ElementLine(1016 1486 770 1486 20)
+			Pin(1056 1378 60 35 "4" 0x01)
+			ElementLine(1016 1378 770 1378 20)
+			Pin(1056 1270 60 35 "5" 0x01)
+			ElementLine(1016 1270 770 1270 20)
+		# Second row
+			Pin(944 1648 60 35 "6" 0x01)
+			ElementLine(904 1648 770 1648 20)
+			Pin(944 1540 60 35 "7" 0x01)
+			ElementLine(904 1540 770 1540 20)
+			Pin(944 1432 60 35 "8" 0x01)
+			ElementLine(904 1432 770 1432 20)
+			Pin(944 1324 60 35 "9" 0x01)
+			ElementLine(904 1324 770 1324 20)
+	# Befestigungsbohrung
+	Pin(1000  1000 250 125 "C1" 0x01)
+	Pin(1000 1972 250 125 "C2" 0x01)
+)
Index: DB9M.fp
===================================================================
--- DB9M.fp	(nonexistent)
+++ DB9M.fp	(revision 293)
@@ -0,0 +1,55 @@
+Element(0x00 "DSUB connector, female/male" "" "DB9M" 1000 1702 1 150 0x00)
+(
+	# Gehaeuse (schmaler Kasten incl. Bohrungen)
+	ElementLine(635 880 665 880 10)
+	ElementLine(665 880 665 2092 10)
+	ElementLine(665 2092 635 2092 10)
+	ElementLine(635 2092 635 880 10)
+	ElementLine(635 940 665 940 10)
+	ElementLine(635 1060 665 1060 10)
+	ElementLine(635 2032 665 2032 10)
+	ElementLine(635 1912 665 1912 10)
+	# Gehaeuse (aeusserer Kasten)
+	# This part of the connector normally hangs off the circuit board,
+	# so it is confusing to actually mark it on the silkscreen
+	# define(`X1', `eval(BASEX-PANEL_DISTANCE-260)')
+	# define(`Y1', `eval(PY1-100)')
+	# define(`X2', `eval(BASEX-PANEL_DISTANCE)')
+	# define(`Y2', `eval(PY2+100)')
+	# ElementLine(X1 Y1 X2 Y1 20)
+	# ElementLine(X2 Y1 X2 Y2 10)
+	# ElementLine(X2 Y2 X1 Y2 20)
+	# ElementLine(X1 Y2 X1 Y1 20)
+	# Gehaeuse (innerer Kasten)
+	ElementLine(665 1110 770 1110 20)
+	ElementLine(770 1110 770 1862 20)
+	ElementLine(770 1862 665 1862 20)
+	ElementLine(665 1862 665 1110 10)
+	# Pins
+		# First row
+			Pin(1056 1270 60 35 "1" 0x101)
+			ElementLine(1016 1270 770 1270 20)
+			Pin(1056 1378 60 35 "2" 0x01)
+			ElementLine(1016 1378 770 1378 20)
+			Pin(1056 1486 60 35 "3" 0x01)
+			ElementLine(1016 1486 770 1486 20)
+			Pin(1056 1594 60 35 "4" 0x01)
+			ElementLine(1016 1594 770 1594 20)
+		# Last pin in first row
+		Pin(1056 1702 60 35 "5" 0x01)
+		ElementLine(1016 1702 770 1702 20)
+		# Second row
+			Pin(944 1324 60 35 "6" 0x01)
+			ElementLine(904 1324 770 1324 20)
+			Pin(944 1432 60 35 "7" 0x01)
+			ElementLine(904 1432 770 1432 20)
+			Pin(944 1540 60 35 "8" 0x01)
+			ElementLine(904 1540 770 1540 20)
+			Pin(944 1648 60 35 "9" 0x01)
+			ElementLine(904 1648 770 1648 20)
+		# Plazierungsmarkierung == PIN 1
+		Mark(1050 1270)
+	# Befestigungsbohrung
+	Pin(1000  1000 250 125 "C1" 0x01)
+	Pin(1000 1972 250 125 "C2" 0x01)
+)