Index: 01005.fp
===================================================================
--- 01005.fp	(nonexistent)
+++ 01005.fp	(revision 326)
@@ -0,0 +1,27 @@
+	# grab the input values and convert to 1/100 mil
+	# how much to grow the pads by for soldermask [1/100 mil]
+	# clearance from planes [1/100 mil]
+	# silk screen width  [1/100 mil]
+	# courtyard silk screen width  [1/100 mil]
+# element_flags, description, pcb-name, value, mark_x, mark_y,
+# text_x, text_y, text_direction, text_scale, text_flags
+Element[0x00000000 "Standard SMT resistor, capacitor etc" "" "01005" 0 0 -3150 -3150 0 100 ""]
+(
+# 
+# Pad[x1, y1, x2, y2, thickness, clearance, mask, name , pad number, flags]
+	Pad[-807 -19
+		-807 19
+		984 2000 1584 "1" "1" "square"]
+	    Pad[807 -19
+		807 19
+		984 2000 1584 "2" "2" "square"]
+#
+# This draws a 1 mil placement courtyard outline in silk.  It should probably
+# not be included since you wont want to try and fab a 1 mil silk line.  Then
+# again, it is most useful during parts placement.  It really is time for some
+# additional non-fab layers...
+#	ElementLine[eval(-1*V1/2) eval(-1*V2/2) eval(-1*V1/2) eval(   V2/2) CYW]
+#	ElementLine[eval(-1*V1/2) eval(-1*V2/2) eval(   V1/2) eval(-1*V2/2) CYW]
+#	ElementLine[eval(   V1/2) eval(   V2/2) eval(   V1/2) eval(-1*V2/2) CYW]
+#	ElementLine[eval(   V1/2) eval(   V2/2) eval(-1*V1/2) eval(   V2/2) CYW]
+)
Index: 0201.fp
===================================================================
--- 0201.fp	(nonexistent)
+++ 0201.fp	(revision 326)
@@ -0,0 +1,27 @@
+	# grab the input values and convert to 1/100 mil
+	# how much to grow the pads by for soldermask [1/100 mil]
+	# clearance from planes [1/100 mil]
+	# silk screen width  [1/100 mil]
+	# courtyard silk screen width  [1/100 mil]
+# element_flags, description, pcb-name, value, mark_x, mark_y,
+# text_x, text_y, text_direction, text_scale, text_flags
+Element[0x00000000 "Standard SMT resistor, capacitor etc" "" "0201" 0 0 -3150 -3150 0 100 ""]
+(
+# 
+# Pad[x1, y1, x2, y2, thickness, clearance, mask, name , pad number, flags]
+	Pad[-1181 0
+		-1181 0
+		1574 2000 2174 "1" "1" "square"]
+	    Pad[1181 0
+		1181 0
+		1574 2000 2174 "2" "2" "square"]
+#
+# This draws a 1 mil placement courtyard outline in silk.  It should probably
+# not be included since you wont want to try and fab a 1 mil silk line.  Then
+# again, it is most useful during parts placement.  It really is time for some
+# additional non-fab layers...
+#	ElementLine[eval(-1*V1/2) eval(-1*V2/2) eval(-1*V1/2) eval(   V2/2) CYW]
+#	ElementLine[eval(-1*V1/2) eval(-1*V2/2) eval(   V1/2) eval(-1*V2/2) CYW]
+#	ElementLine[eval(   V1/2) eval(   V2/2) eval(   V1/2) eval(-1*V2/2) CYW]
+#	ElementLine[eval(   V1/2) eval(   V2/2) eval(-1*V1/2) eval(   V2/2) CYW]
+)
Index: 0402.fp
===================================================================
--- 0402.fp	(nonexistent)
+++ 0402.fp	(revision 326)
@@ -0,0 +1,27 @@
+	# grab the input values and convert to 1/100 mil
+	# how much to grow the pads by for soldermask [1/100 mil]
+	# clearance from planes [1/100 mil]
+	# silk screen width  [1/100 mil]
+	# courtyard silk screen width  [1/100 mil]
+# element_flags, description, pcb-name, value, mark_x, mark_y,
+# text_x, text_y, text_direction, text_scale, text_flags
+Element[0x00000000 "Standard SMT resistor, capacitor etc" "" "0402" 0 0 -3150 -3150 0 100 ""]
+(
+# 
+# Pad[x1, y1, x2, y2, thickness, clearance, mask, name , pad number, flags]
+	Pad[-1574 -393
+		-1574 393
+		1968 2000 2568 "1" "1" "square"]
+	    Pad[1574 -393
+		1574 393
+		1968 2000 2568 "2" "2" "square"]
+#
+# This draws a 1 mil placement courtyard outline in silk.  It should probably
+# not be included since you wont want to try and fab a 1 mil silk line.  Then
+# again, it is most useful during parts placement.  It really is time for some
+# additional non-fab layers...
+#	ElementLine[eval(-1*V1/2) eval(-1*V2/2) eval(-1*V1/2) eval(   V2/2) CYW]
+#	ElementLine[eval(-1*V1/2) eval(-1*V2/2) eval(   V1/2) eval(-1*V2/2) CYW]
+#	ElementLine[eval(   V1/2) eval(   V2/2) eval(   V1/2) eval(-1*V2/2) CYW]
+#	ElementLine[eval(   V1/2) eval(   V2/2) eval(-1*V1/2) eval(   V2/2) CYW]
+)
Index: 0603.fp
===================================================================
--- 0603.fp	(nonexistent)
+++ 0603.fp	(revision 326)
@@ -0,0 +1,27 @@
+	# grab the input values and convert to 1/100 mil
+	# how much to grow the pads by for soldermask [1/100 mil]
+	# clearance from planes [1/100 mil]
+	# silk screen width  [1/100 mil]
+	# courtyard silk screen width  [1/100 mil]
+# element_flags, description, pcb-name, value, mark_x, mark_y,
+# text_x, text_y, text_direction, text_scale, text_flags
+Element[0x00000000 "Standard SMT resistor, capacitor etc" "" "0603" 0 0 -3150 -3150 0 100 ""]
+(
+# 
+# Pad[x1, y1, x2, y2, thickness, clearance, mask, name , pad number, flags]
+	Pad[-2559 -492
+		-2559 492
+		2952 2000 3552 "1" "1" "square"]
+	    Pad[2559 -492
+		2559 492
+		2952 2000 3552 "2" "2" "square"]
+#
+# This draws a 1 mil placement courtyard outline in silk.  It should probably
+# not be included since you wont want to try and fab a 1 mil silk line.  Then
+# again, it is most useful during parts placement.  It really is time for some
+# additional non-fab layers...
+#	ElementLine[eval(-1*V1/2) eval(-1*V2/2) eval(-1*V1/2) eval(   V2/2) CYW]
+#	ElementLine[eval(-1*V1/2) eval(-1*V2/2) eval(   V1/2) eval(-1*V2/2) CYW]
+#	ElementLine[eval(   V1/2) eval(   V2/2) eval(   V1/2) eval(-1*V2/2) CYW]
+#	ElementLine[eval(   V1/2) eval(   V2/2) eval(-1*V1/2) eval(   V2/2) CYW]
+)
Index: 0805.fp
===================================================================
--- 0805.fp	(nonexistent)
+++ 0805.fp	(revision 326)
@@ -0,0 +1,29 @@
+	# grab the input values and convert to 1/100 mil
+	# how much to grow the pads by for soldermask [1/100 mil]
+	# clearance from planes [1/100 mil]
+	# silk screen width  [1/100 mil]
+	# courtyard silk screen width  [1/100 mil]
+# element_flags, description, pcb-name, value, mark_x, mark_y,
+# text_x, text_y, text_direction, text_scale, text_flags
+Element[0x00000000 "Standard SMT resistor, capacitor etc" "" "0805" 0 0 -3150 -3150 0 100 ""]
+(
+# 
+# Pad[x1, y1, x2, y2, thickness, clearance, mask, name , pad number, flags]
+	Pad[-3543 -393
+		-3543 393
+		5118 2000 5718 "1" "1" "square"]
+	    Pad[3543 -393
+		3543 393
+		5118 2000 5718 "2" "2" "square"]
+	ElementLine[-393 -2755 393 -2755 800]
+	    ElementLine[-393 2755 393 2755 800]
+#
+# This draws a 1 mil placement courtyard outline in silk.  It should probably
+# not be included since you wont want to try and fab a 1 mil silk line.  Then
+# again, it is most useful during parts placement.  It really is time for some
+# additional non-fab layers...
+#	ElementLine[eval(-1*V1/2) eval(-1*V2/2) eval(-1*V1/2) eval(   V2/2) CYW]
+#	ElementLine[eval(-1*V1/2) eval(-1*V2/2) eval(   V1/2) eval(-1*V2/2) CYW]
+#	ElementLine[eval(   V1/2) eval(   V2/2) eval(   V1/2) eval(-1*V2/2) CYW]
+#	ElementLine[eval(   V1/2) eval(   V2/2) eval(-1*V1/2) eval(   V2/2) CYW]
+)
Index: 1008.fp
===================================================================
--- 1008.fp	(nonexistent)
+++ 1008.fp	(revision 326)
@@ -0,0 +1,29 @@
+	# grab the input values and convert to 1/100 mil
+	# how much to grow the pads by for soldermask [1/100 mil]
+	# clearance from planes [1/100 mil]
+	# silk screen width  [1/100 mil]
+	# courtyard silk screen width  [1/100 mil]
+# element_flags, description, pcb-name, value, mark_x, mark_y,
+# text_x, text_y, text_direction, text_scale, text_flags
+Element[0x00000000 "Standard SMT resistor, capacitor etc" "" "1008" 0 0 -3150 -3150 0 100 ""]
+(
+# 
+# Pad[x1, y1, x2, y2, thickness, clearance, mask, name , pad number, flags]
+	Pad[-5118 -2362
+		-5118 2362
+		4330 2000 4930 "1" "1" "square"]
+	    Pad[5118 -2362
+		5118 2362
+		4330 2000 4930 "2" "2" "square"]
+	ElementLine[-1377 -4527 1377 -4527 800]
+	    ElementLine[-1377 4527 1377 4527 800]
+#
+# This draws a 1 mil placement courtyard outline in silk.  It should probably
+# not be included since you wont want to try and fab a 1 mil silk line.  Then
+# again, it is most useful during parts placement.  It really is time for some
+# additional non-fab layers...
+#	ElementLine[eval(-1*V1/2) eval(-1*V2/2) eval(-1*V1/2) eval(   V2/2) CYW]
+#	ElementLine[eval(-1*V1/2) eval(-1*V2/2) eval(   V1/2) eval(-1*V2/2) CYW]
+#	ElementLine[eval(   V1/2) eval(   V2/2) eval(   V1/2) eval(-1*V2/2) CYW]
+#	ElementLine[eval(   V1/2) eval(   V2/2) eval(-1*V1/2) eval(   V2/2) CYW]
+)
Index: 1206.fp
===================================================================
--- 1206.fp	(nonexistent)
+++ 1206.fp	(revision 326)
@@ -0,0 +1,29 @@
+	# grab the input values and convert to 1/100 mil
+	# how much to grow the pads by for soldermask [1/100 mil]
+	# clearance from planes [1/100 mil]
+	# silk screen width  [1/100 mil]
+	# courtyard silk screen width  [1/100 mil]
+# element_flags, description, pcb-name, value, mark_x, mark_y,
+# text_x, text_y, text_direction, text_scale, text_flags
+Element[0x00000000 "Standard SMT resistor, capacitor etc" "" "1206" 0 0 -3150 -3150 0 100 ""]
+(
+# 
+# Pad[x1, y1, x2, y2, thickness, clearance, mask, name , pad number, flags]
+	Pad[-5905 -1181
+		-5905 1181
+		5118 2000 5718 "1" "1" "square"]
+	    Pad[5905 -1181
+		5905 1181
+		5118 2000 5718 "2" "2" "square"]
+	ElementLine[-2362 -3740 2362 -3740 800]
+	    ElementLine[-2362 3740 2362 3740 800]
+#
+# This draws a 1 mil placement courtyard outline in silk.  It should probably
+# not be included since you wont want to try and fab a 1 mil silk line.  Then
+# again, it is most useful during parts placement.  It really is time for some
+# additional non-fab layers...
+#	ElementLine[eval(-1*V1/2) eval(-1*V2/2) eval(-1*V1/2) eval(   V2/2) CYW]
+#	ElementLine[eval(-1*V1/2) eval(-1*V2/2) eval(   V1/2) eval(-1*V2/2) CYW]
+#	ElementLine[eval(   V1/2) eval(   V2/2) eval(   V1/2) eval(-1*V2/2) CYW]
+#	ElementLine[eval(   V1/2) eval(   V2/2) eval(-1*V1/2) eval(   V2/2) CYW]
+)
Index: 1210.fp
===================================================================
--- 1210.fp	(nonexistent)
+++ 1210.fp	(revision 326)
@@ -0,0 +1,29 @@
+	# grab the input values and convert to 1/100 mil
+	# how much to grow the pads by for soldermask [1/100 mil]
+	# clearance from planes [1/100 mil]
+	# silk screen width  [1/100 mil]
+	# courtyard silk screen width  [1/100 mil]
+# element_flags, description, pcb-name, value, mark_x, mark_y,
+# text_x, text_y, text_direction, text_scale, text_flags
+Element[0x00000000 "Standard SMT resistor, capacitor etc" "" "1210" 0 0 -3150 -3150 0 100 ""]
+(
+# 
+# Pad[x1, y1, x2, y2, thickness, clearance, mask, name , pad number, flags]
+	Pad[-5905 -2755
+		-5905 2755
+		5118 2000 5718 "1" "1" "square"]
+	    Pad[5905 -2755
+		5905 2755
+		5118 2000 5718 "2" "2" "square"]
+	ElementLine[-1968 -5314 1968 -5314 800]
+	    ElementLine[-1968 5314 1968 5314 800]
+#
+# This draws a 1 mil placement courtyard outline in silk.  It should probably
+# not be included since you wont want to try and fab a 1 mil silk line.  Then
+# again, it is most useful during parts placement.  It really is time for some
+# additional non-fab layers...
+#	ElementLine[eval(-1*V1/2) eval(-1*V2/2) eval(-1*V1/2) eval(   V2/2) CYW]
+#	ElementLine[eval(-1*V1/2) eval(-1*V2/2) eval(   V1/2) eval(-1*V2/2) CYW]
+#	ElementLine[eval(   V1/2) eval(   V2/2) eval(   V1/2) eval(-1*V2/2) CYW]
+#	ElementLine[eval(   V1/2) eval(   V2/2) eval(-1*V1/2) eval(   V2/2) CYW]
+)
Index: 1806.fp
===================================================================
--- 1806.fp	(nonexistent)
+++ 1806.fp	(revision 326)
@@ -0,0 +1,29 @@
+	# grab the input values and convert to 1/100 mil
+	# how much to grow the pads by for soldermask [1/100 mil]
+	# clearance from planes [1/100 mil]
+	# silk screen width  [1/100 mil]
+	# courtyard silk screen width  [1/100 mil]
+# element_flags, description, pcb-name, value, mark_x, mark_y,
+# text_x, text_y, text_direction, text_scale, text_flags
+Element[0x00000000 "Standard SMT resistor, capacitor etc" "" "1806" 0 0 -3150 -3150 0 100 ""]
+(
+# 
+# Pad[x1, y1, x2, y2, thickness, clearance, mask, name , pad number, flags]
+	Pad[-7874 -3543
+		-7874 3543
+		6299 2000 6899 "1" "1" "square"]
+	    Pad[7874 -3543
+		7874 3543
+		6299 2000 6899 "2" "2" "square"]
+	ElementLine[-3149 -6692 3149 -6692 800]
+	    ElementLine[-3149 6692 3149 6692 800]
+#
+# This draws a 1 mil placement courtyard outline in silk.  It should probably
+# not be included since you wont want to try and fab a 1 mil silk line.  Then
+# again, it is most useful during parts placement.  It really is time for some
+# additional non-fab layers...
+#	ElementLine[eval(-1*V1/2) eval(-1*V2/2) eval(-1*V1/2) eval(   V2/2) CYW]
+#	ElementLine[eval(-1*V1/2) eval(-1*V2/2) eval(   V1/2) eval(-1*V2/2) CYW]
+#	ElementLine[eval(   V1/2) eval(   V2/2) eval(   V1/2) eval(-1*V2/2) CYW]
+#	ElementLine[eval(   V1/2) eval(   V2/2) eval(-1*V1/2) eval(   V2/2) CYW]
+)
Index: 1825.fp
===================================================================
--- 1825.fp	(nonexistent)
+++ 1825.fp	(revision 326)
@@ -0,0 +1,29 @@
+	# grab the input values and convert to 1/100 mil
+	# how much to grow the pads by for soldermask [1/100 mil]
+	# clearance from planes [1/100 mil]
+	# silk screen width  [1/100 mil]
+	# courtyard silk screen width  [1/100 mil]
+# element_flags, description, pcb-name, value, mark_x, mark_y,
+# text_x, text_y, text_direction, text_scale, text_flags
+Element[0x00000000 "Standard SMT resistor, capacitor etc" "" "1825" 0 0 -3150 -3150 0 100 ""]
+(
+# 
+# Pad[x1, y1, x2, y2, thickness, clearance, mask, name , pad number, flags]
+	Pad[-7874 -10236
+		-7874 10236
+		6299 2000 6899 "1" "1" "square"]
+	    Pad[7874 -10236
+		7874 10236
+		6299 2000 6899 "2" "2" "square"]
+	ElementLine[-3149 -13385 3149 -13385 800]
+	    ElementLine[-3149 13385 3149 13385 800]
+#
+# This draws a 1 mil placement courtyard outline in silk.  It should probably
+# not be included since you wont want to try and fab a 1 mil silk line.  Then
+# again, it is most useful during parts placement.  It really is time for some
+# additional non-fab layers...
+#	ElementLine[eval(-1*V1/2) eval(-1*V2/2) eval(-1*V1/2) eval(   V2/2) CYW]
+#	ElementLine[eval(-1*V1/2) eval(-1*V2/2) eval(   V1/2) eval(-1*V2/2) CYW]
+#	ElementLine[eval(   V1/2) eval(   V2/2) eval(   V1/2) eval(-1*V2/2) CYW]
+#	ElementLine[eval(   V1/2) eval(   V2/2) eval(-1*V1/2) eval(   V2/2) CYW]
+)
Index: 2706.fp
===================================================================
--- 2706.fp	(nonexistent)
+++ 2706.fp	(revision 326)
@@ -0,0 +1,15 @@
+	# how much to grow the pads by for soldermask
+	# clearance from planes
+Element(0x00 "Standard SMT resistor, capacitor etc" "" "2706" 0 0 179 0 3 100 0x00)
+(
+	ElementLine(-159 -54 -159 54 10)
+	    ElementLine(-159 54 159 54 10)
+	    ElementLine(159 54 159 -54 10)
+	    ElementLine(159 -54 -159 -54 10)
+	Pad(-108 -3 
+		-108 3
+		78 20 84 "1" "1" 0x00000100)
+	    Pad(108 -3 
+		108 3
+		78 20 84 "2" "2" 0x00000100)
+)
Index: DO214.fp
===================================================================
--- DO214.fp	(nonexistent)
+++ DO214.fp	(revision 326)
@@ -0,0 +1,17 @@
+	# how much to grow the pads by for soldermask
+	# clearance from planes
+Element(0x00 "SMT diode (pin 1 is cathode)" "" "DO214" 0 0 221 0 3 100 0x00)
+(
+	ElementLine(-211 -89 -211 89 20)
+	    ElementLine(-211 89 -141 114 10)
+	    ElementLine(-141 114 201 114 10)
+	    ElementLine(201 114 201 -114 10)
+	    ElementLine(201 -114 -141 -114 10)
+	    ElementLine(-141 -114 -211 -89 10)
+	Pad(-106 -19 
+		-106 19
+		140 20 146 "1" "1" 0x00000100)
+	    Pad(106 -19 
+		106 19
+		140 20 146 "2" "2" 0x00000100)
+)
Index: DO214AB.fp
===================================================================
--- DO214AB.fp	(nonexistent)
+++ DO214AB.fp	(revision 326)
@@ -0,0 +1,17 @@
+	# how much to grow the pads by for soldermask
+	# clearance from planes
+Element(0x00 "SMT diode (pin 1 is cathode)" "" "DO214AB" 0 0 227 0 3 100 0x00)
+(
+	ElementLine(-217 -92 -217 92 20)
+	    ElementLine(-217 92 -145 118 10)
+	    ElementLine(-145 118 207 118 10)
+	    ElementLine(207 118 207 -118 10)
+	    ElementLine(207 -118 -145 -118 10)
+	    ElementLine(-145 -118 -217 -92 10)
+	Pad(-109 -20 
+		-109 20
+		145 20 151 "1" "1" 0x00000100)
+	    Pad(109 -20 
+		109 20
+		145 20 151 "2" "2" 0x00000100)
+)
Index: MPAK.fp
===================================================================
--- MPAK.fp	(nonexistent)
+++ MPAK.fp	(revision 326)
@@ -0,0 +1,26 @@
+Element(0x00 "Pressure transducer" "" "MPAK" 235 0 3 100 0x00)
+(
+	ElementLine(0 0 0 558 10)
+	ElementLine(0 558 215 558 10)
+	ElementLine(215 558 215 0 10)
+	ElementLine(215 0 0 0 10)
+	# 1st pin on pin side
+	Pad(32 469
+	    32 525
+			   31 "1" "1" 0x100)
+	Pad(82 469
+	       82 525
+			   31 "2" "2" 0x100)
+	   Pad(132 469
+	       132 525
+			   31 "3" "3" 0x100)
+	# last pin on pin side
+	Pad(182 469
+	    182 525
+			   31 "4" "4" 0x100)
+	# extra wide pin on opposite side
+	Pad(144 60
+	    70 60
+			   87 "5" "5" 0x100)
+	Mark(32 497)
+)