Index: drc_query/dwg_area.ref
===================================================================
--- drc_query/dwg_area.ref	(revision 33043)
+++ drc_query/dwg_area.ref	(revision 33044)
@@ -1,20 +1,16 @@
 x: object beyond drawing area: Objects located outside of the drawing area
 within (487.40, 43.65, 612.60, 106.35) mil
-required value 0.00
 Objects may be omitted from exports or may be outside of the board contour.
 
 x: object beyond drawing area: Objects located outside of the drawing area
 within (112.40, 193.65, 237.60, 256.35) mil
-required value 0.00
 Objects may be omitted from exports or may be outside of the board contour.
 
 x: object beyond drawing area: Objects located outside of the drawing area
 within (112.40, -106.35, 237.60, -43.65) mil
-required value 0.00
 Objects may be omitted from exports or may be outside of the board contour.
 
 x: object beyond drawing area: Objects located outside of the drawing area
 within (-212.60, 43.65, -87.40, 106.35) mil
-required value 0.00
 Objects may be omitted from exports or may be outside of the board contour.
 
Index: drc_query/fullpoly.ref
===================================================================
--- drc_query/fullpoly.ref	(revision 33043)
+++ drc_query/fullpoly.ref	(revision 33044)
@@ -2,6 +2,5 @@
 W: Polygon #116 cleared out of existence near (8.5725 mm, 8.5725 mm)
 x: fullpoly: Multi-island polygon with the fullpoly flag
 within (259.38, 9.38, 415.63, 165.63) mil
-required value 0.00
 Polygon with the fullpoly flag set is cut into multiple islands
 
Index: drc_query/netint.ref
===================================================================
--- drc_query/netint.ref	(revision 33043)
+++ drc_query/netint.ref	(revision 33044)
@@ -1,15 +1,12 @@
 x: shorted nets: net too close to other net
 within (23.98, 7.31, 126.02, 183.43) mil
-required value 0.00
 insufficient clearance between an object of the network and objects of other networks
 
 x: shorted nets: net too close to other net
 within (23.98, 7.31, 126.02, 183.43) mil
-required value 0.00
 insufficient clearance between an object of the network and objects of other networks
 
 x: broken net: insufficient overlap
 within (17.50, 111.25, 91.76, 248.01) mil
-required value 0.00
 the overlap between two objects in the net is insufficient and can lead to broken network during board fabrication
 
Index: drc_query/overlap.ref
===================================================================
--- drc_query/overlap.ref	(revision 33043)
+++ drc_query/overlap.ref	(revision 33044)
@@ -6,6 +6,7 @@
 
 x: single hole: hole too small
 within (20.00, 245.00, 130.00, 355.00) mil
-required value 0.00
+required value 15.00 mil
+measured value 1.50 mil
 padstack hole diameter is too small
 
Index: drc_query/thickness.ref
===================================================================
--- drc_query/thickness.ref	(revision 33043)
+++ drc_query/thickness.ref	(revision 33044)
@@ -1,30 +1,36 @@
 x: thin silk: silk object too thin
 within (1196.00, 413.75, 1566.00, 556.25) mil
-required value 0.00
+required value 7.00 mil
+measured value 6.00 mil
 Silk object thickness is below the required value. Silk objects too thin may disappear during board fabrication.
 
 x: thin silk: silk object too thin
 within (976.92, 351.93, 1223.08, 598.08) mil
-required value 0.00
+required value 7.00 mil
+measured value 6.00 mil
 Silk object thickness is below the required value. Silk objects too thin may disappear during board fabrication.
 
 x: thin silk: silk object too thin
 within (896.16, 324.29, 953.84, 600.71) mil
-required value 0.00
+required value 7.00 mil
+measured value 6.00 mil
 Silk object thickness is below the required value. Silk objects too thin may disappear during board fabrication.
 
 x: thin copper: copper object too thin
 within (346.00, 413.75, 716.00, 556.25) mil
-required value 0.00
+required value 10.00 mil
+measured value 9.00 mil
 Copper object thickness is below the required value. Copper objects too thin may break or peel off during board fabriaction.
 
 x: thin copper: copper object too thin
 within (125.01, 350.01, 374.99, 599.99) mil
-required value 0.00
+required value 10.00 mil
+measured value 9.00 mil
 Copper object thickness is below the required value. Copper objects too thin may break or peel off during board fabriaction.
 
 x: thin copper: copper object too thin
 within (44.28, 322.41, 105.72, 602.59) mil
-required value 0.00
+required value 10.00 mil
+measured value 9.00 mil
 Copper object thickness is below the required value. Copper objects too thin may break or peel off during board fabriaction.
 
Index: drc_query/zone_clr.ref
===================================================================
--- drc_query/zone_clr.ref	(revision 33043)
+++ drc_query/zone_clr.ref	(revision 33044)
@@ -1,10 +1,10 @@
 x: shorted nets: net too close to other net (zone)
 within (396.78, 131.15, 678.22, 568.85) mil
-required value 20.00 mil
+required value 20mil
 insufficient clearance between an object of the network and objects of other networks
 
 x: shorted nets: net too close to other net (zone)
 within (362.40, 284.28, 487.60, 440.72) mil
-required value 20.00 mil
+required value 20mil
 insufficient clearance between an object of the network and objects of other networks