Index: 07_io/3_2_export_xy/index.html
===================================================================
--- 07_io/3_2_export_xy/index.html (revision 35882)
+++ 07_io/3_2_export_xy/index.html (revision 35883)
@@ -65,16 +65,23 @@
%subc.value_% | print the cleaned value of the current subcircuit
|
%subc.x% | print the X coordinate of the origin of the subcircuit (coord with unit suffix)
|
%subc.y% | print the Y coordinate of the origin of the subcircuit (coord with unit suffix)
- |
%subc.padx% | print the X coordinate calculated from padstacks of the subcircuit (coord with unit suffix)
- |
%subc.pady% | print the Y coordinate calculated from padstacks of the subcircuit (coord with unit suffix)
+ |
%subc.side-x% | same as %subc.x% but on the bottom side use bottom-pnp-origin
+ |
%subc.side-y% | same as %subc.y% but on the bottom side use bottom-pnp-origin
+ |
%subc.padcx% | print the X coordinate calculated from padstacks of the subcircuit (coord with unit suffix)
+ |
%subc.padcy% | print the Y coordinate calculated from padstacks of the subcircuit (coord with unit suffix)
+ |
%subc.side-cx% | same as %subc.padcx% but on the bottom side use bottom-pnp-origin
+ |
%subc.side-cy% | same as %subc.padcy% but on the bottom side use bottom-pnp-origin
|
%subc.pad_width% | print the total width calculated from padstacks of the subcircuit (coord with unit suffix)
|
%subc.pad_height% | print the total height calculated from padstacks of the subcircuit (coord with unit suffix)
|
%subc.pad_width_prerot% | print the total width calculated from padstacks of the subcircuit, before applying rotation (coord with unit suffix)
|
%subc.pad_height_prerot% | print the total height calculated from padstacks of the subcircuit, before applying rotation (coord with unit suffix)
|
%subc.rot% | print the subc rotation value in degrees
- |
%subc.siderot% | print the subc rotation value in degrees, always looking from the top side, "x-ray mode" (relative to side)
+ |
%subc.negrot% | print the subc -1 * rotation value in degrees
+ |
%subc.side-rot% | TODO
+ |
%subc.side-negrot% | TODO
+ |
%subc.siderot% | broken, do not use
|
%subc.270-rot% | print the subc rotation value in degrees, subtracted from 270
- |
%subc.side270-rot% | print the subc rotation value in degrees, always looking from the top side, "x-ray mode", subtracted from 270 (relative to side)
+ |
%subc.side270-rot% | broken, do not use
|
%subc.side% | "top" or "bottom" (determined by subc placement, the subc aux layer)
|
%subc.num-side% | "1" for top or "2" for bottom (determined by subc placement, the subc aux layer)
|
%subc.count% | integer value, incremented by one before processing each subcircuit
|