Index: trunk/footprint/thru-hole/HC49U.fp
===================================================================
--- trunk/footprint/thru-hole/HC49U.fp	(revision 37461)
+++ trunk/footprint/thru-hole/HC49U.fp	(revision 37462)
@@ -2,6 +2,8 @@
  ha:subc.5 {
   ha:attributes {
    footprint = HC49U Crystals
+   openscad = HC49U.scad
+   openscad-param = {height=13.46}
   }
   ha:data {
    li:padstack_prototypes {
Index: trunk/footprint/thru-hole/HC49U.scad
===================================================================
--- trunk/footprint/thru-hole/HC49U.scad	(nonexistent)
+++ trunk/footprint/thru-hole/HC49U.scad	(revision 37462)
@@ -0,0 +1,84 @@
+// Model for HC49 through hole package
+//
+// Copyright (C) 2023 Erich Heinzle
+//
+// File distribution license:
+//  This library is free software; you can redistribute it and/or
+//  modify it under the terms of the GNU Lesser General Public
+//  License as published by the Free Software Foundation; either
+//  version 2.1 of the License, or (at your option) any later version.
+//
+//  This library is distributed in the hope that it will be useful,
+//  but WITHOUT ANY WARRANTY; without even the implied warranty of
+//  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+//  Lesser General Public License for more details.
+//
+//  You should have received a copy of the GNU Lesser General Public
+//  License along with this library; if not, write to the Free Software
+//  Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301  USA
+//
+// The above distribution license applies when the file is distributed as a
+// stand alone model file or as part of a library, in both cases intended
+// for reuse combined by the user with other openscad scripts.
+//
+// Use license:
+//  as a special exception, the content of the file may be
+//  embedded in an openscad script that represents a printed circuit board,
+//  for example when a board is exported by pcb-rnd. In such use case,
+//  the content of this file may be copied into the resulting board file
+//  with or without modifications, without affecting the board file's license
+//  in any way.
+//
+
+module HC49(height)
+{
+    major_diameter = 4.65;
+    minor_diameter = 3.8;
+    rim_thickness = 0.43;
+    pin_diameter = 0.43;
+    pcb_offset = 0.1;
+    rounding = 0.5;
+    $fn = 50;
+    
+    // r[adius], h[eight], [rou]n[d]
+    module rounded_cylinder(r,h,n) {
+        rotate_extrude(convexity=1) {
+            offset(r=n) offset(delta=-n) square([r,h]);
+                square([n,h]);
+        }
+    }
+
+    union() {
+        color([0.7,0.7,0.7]) {
+            translate ([2.44,0,pcb_offset]) {
+                translate ([(10.24-minor_diameter)/2,0,0])
+                    rounded_cylinder(minor_diameter/2,height,rounding);
+                translate ([-(10.24-minor_diameter)/2,0,0])
+                    rounded_cylinder(minor_diameter/2,height,rounding);
+                translate ([0,0,(height-rounding)/2])
+                    cube([10.24-minor_diameter,minor_diameter, height - rounding], true);
+                translate ([0,0,height-rounding])
+                    cube([10.24-minor_diameter,minor_diameter-rounding*2, rounding*2], true);
+                translate ([-(10.24-minor_diameter)/2,-minor_diameter/2+rounding,height-rounding])
+                    rotate([0,90,0])
+                        cylinder(r = rounding, h = 10.24-minor_diameter);
+                translate ([-(10.24-minor_diameter)/2,minor_diameter/2-rounding,height-rounding])
+                    rotate([0,90,0])
+                        cylinder(r = rounding, h = 10.24-minor_diameter);
+                
+                translate ([-(11.05-major_diameter)/2,0,0])
+                    cylinder(r = major_diameter/2, h = rim_thickness);
+                translate ([(11.05-major_diameter)/2,0,0])
+                    cylinder(r = major_diameter/2, h = rim_thickness);
+                translate ([0,0,rim_thickness/2])
+                    cube([11.05-major_diameter,major_diameter, rim_thickness], true);
+            }
+        }
+        color([0.8,0.8,0.8]) {
+            translate ([0,0,-2.45])
+                cylinder(r = pin_diameter/2, h = pcb_offset +2.5);
+            translate ([4.88,0,-2.45])
+                cylinder(r = pin_diameter/2, h = pcb_offset + 2.5);
+        }
+    }
+}