Index: trunk/footprint/thru-hole/MULTIWATT11.fp
===================================================================
--- trunk/footprint/thru-hole/MULTIWATT11.fp	(revision 37486)
+++ trunk/footprint/thru-hole/MULTIWATT11.fp	(revision 37487)
@@ -2,6 +2,7 @@
  ha:subc.5 {
   ha:attributes {
    footprint = MULTIWATT11 Power IC
+   openscad = MULTIWATT11.scad
   }
   ha:data {
    li:padstack_prototypes {
Index: trunk/footprint/thru-hole/MULTIWATT11.scad
===================================================================
--- trunk/footprint/thru-hole/MULTIWATT11.scad	(nonexistent)
+++ trunk/footprint/thru-hole/MULTIWATT11.scad	(revision 37487)
@@ -0,0 +1,123 @@
+// Model for vertical MULTIWATT11 package
+//
+// Copyright (C) 2017,2020 Tibor 'Igor2' Palinkas
+// Copyright (C) 2023 Erich Heinzle
+//
+// File distribution license:
+//  This library is free software; you can redistribute it and/or
+//  modify it under the terms of the GNU Lesser General Public
+//  License as published by the Free Software Foundation; either
+//  version 2.1 of the License, or (at your option) any later version.
+//
+//  This library is distributed in the hope that it will be useful,
+//  but WITHOUT ANY WARRANTY; without even the implied warranty of
+//  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+//  Lesser General Public License for more details.
+//
+//  You should have received a copy of the GNU Lesser General Public
+//  License along with this library; if not, write to the Free Software
+//  Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301  USA
+//
+// The above distribution license applies when the file is distributed as a
+// stand alone model file or as part of a library, in both cases intended
+// for reuse combined by the user with other openscad scripts.
+//
+// Use license:
+//  as a special exception, the content of the file may be
+//  embedded in an openscad script that represents a printed circuit board,
+//  for example when a board is exported by pcb-rnd. In such use case,
+//  the content of this file may be copied into the resulting board file
+//  with or without modifications, without affecting the board file's license
+//  in any way.
+//
+
+module multiwatt11()
+{
+    pins=11;
+    pin_thickness = 0.6;
+    pin_width = 0.7;
+    
+    pin_neck = 3.85;
+    pin_spacing = 1.7018;
+
+    tab_thickness = 1.6;
+    tab_width = 19.6;
+    tab_height = 6.81;
+    tab_overhang = 6.8;
+    tab_bevel = 2.3;
+    
+    device_height = 10;
+    device_width = 19.6;
+    body_thickness = 4.8;
+    body_offset = 3.4;
+
+    hole_dia = 3.75;
+    hole_height = -4.0;
+    notch_size = 3.0;
+    notch_height = 6.0;
+
+    $fn = 30;
+
+    module pin() {
+        pin_descent = 2.5;
+        rotate([0,-90,180])
+            translate([-pin_thickness/2,0,-pin_width/2])
+                linear_extrude(height=pin_width)
+                    polygon([[0,0],[0.51,0],[0.51,0.56],[0.54,0.7],[0.6,0.82],[0.71,0.93],[0.84,1.02],[1.0,1.08],[6.26,2.24],[6.64,2.35],[6.86,2.47],[7.01,2.59],[7.11,2.74],[7.15,2.9],[7.15,5.5],[6.62,5.5],[6.62,3.29],[6.6,3.14],[6.57,2.99],[6.48,2.87],[6.22,2.76],[6.08,2.72],[0.72,1.55],[0.49,1.45],[0.3,1.34],[0.13,1.21],[0.02,0.99],[0,0.79]]);
+    }
+
+    module pin2() {
+        pin_descent = 2.5;
+        rotate([0,-90,180])
+            translate([-pin_thickness/2,0,-pin_width/2])
+                linear_extrude(height=pin_width)
+                    polygon([[0,0],[0.5,0],[0.5,0.71],[0.51,0.8],[0.54,0.89],[0.61,1.02],[1.70,2.31],[1.84,2.5],[1.92,2.66],[1.95,2.80],[1.96,2.98],[1.97,3.18],[1.97,5.5],[1.37,5.5],[1.37,3.4],[1.36,3.2],[1.34,3.01],[1.29,2.85],[1.22,2.68],[1.12,2.52],[1.02,2.38],[0.2,1.4],[0.13,1.26],[0.06,1.10],[0.01,0.96],[0,0.8]]);
+    }
+
+    module body() {
+        union() {
+            color([0.3,0.3,0.3]) {
+                difference() {
+                    translate([0,hole_height,-body_offset])
+                        translate([device_width/2,0,0])
+                            rotate([0,-90,0])
+                                linear_extrude(height=device_width)
+                                    polygon([[0,0],[1.6,0],[4.8,-0.3],[4.8,-9.6],[3.8,-10.0],[1.6,-10.0],[0,-9.7]]);
+                    translate([-device_width/2,hole_height-notch_height,-3])
+                        cylinder(r=notch_size/2, h=body_thickness*2);
+                    translate([device_width/2,hole_height-notch_height,-3])
+                        cylinder(r=notch_size/2, h=body_thickness*2);
+                }
+            }
+            color([0.8,0.8,0.8])
+                translate([0,hole_height+tab_overhang,-body_offset])
+                    difference() {
+                        linear_extrude(height=tab_thickness)
+                            polygon([[-tab_width/2,-tab_height],[tab_width/2,-tab_height],[tab_width/2,-tab_bevel],[tab_width/2-tab_bevel,0],[-tab_width/2+tab_bevel,0],[-tab_width/2,-tab_bevel]]);
+                    translate([0,-hole_height-tab_overhang,-body_thickness])
+                        cylinder(r=hole_dia/2, h=body_thickness*3);
+                    }
+        }
+    }
+
+    translate([-3.2,device_width/2-pin_spacing/2-pin_width/2,0]) {
+        rotate([90,0,90]) {
+            translate([0,0,0]) {
+                union() {
+                    color([0.9, 0.9, 0.9]) {
+                        for (index = [0:2:pins-1]) {
+                            translate([(index+0.5)*pin_spacing-device_width/2+pin_width/2,pin_neck+0.05,-pin_thickness/2])
+                                pin();
+                        }
+                        for (index = [1:2:pins-1]) {
+                            translate([(index+0.5)*pin_spacing-device_width/2+pin_width/2,pin_neck+0.05,-pin_thickness/2])
+                                pin2();
+                        }
+                    }
+                    translate([0,pin_neck+device_height-hole_height,0])
+                        body();
+                }
+            }
+        }
+    }
+}
Index: trunk/footprint/thru-hole/MULTIWATT15.fp
===================================================================
--- trunk/footprint/thru-hole/MULTIWATT15.fp	(revision 37486)
+++ trunk/footprint/thru-hole/MULTIWATT15.fp	(revision 37487)
@@ -2,6 +2,7 @@
  ha:subc.5 {
   ha:attributes {
    footprint = MULTIWATT15 Power IC
+   openscad = MULTIWATT15.scad
   }
   ha:data {
    li:padstack_prototypes {
Index: trunk/footprint/thru-hole/MULTIWATT15.scad
===================================================================
--- trunk/footprint/thru-hole/MULTIWATT15.scad	(nonexistent)
+++ trunk/footprint/thru-hole/MULTIWATT15.scad	(revision 37487)
@@ -0,0 +1,123 @@
+// Model for vertical MULTIWATT15 package
+//
+// Copyright (C) 2017,2020 Tibor 'Igor2' Palinkas
+// Copyright (C) 2023 Erich Heinzle
+//
+// File distribution license:
+//  This library is free software; you can redistribute it and/or
+//  modify it under the terms of the GNU Lesser General Public
+//  License as published by the Free Software Foundation; either
+//  version 2.1 of the License, or (at your option) any later version.
+//
+//  This library is distributed in the hope that it will be useful,
+//  but WITHOUT ANY WARRANTY; without even the implied warranty of
+//  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+//  Lesser General Public License for more details.
+//
+//  You should have received a copy of the GNU Lesser General Public
+//  License along with this library; if not, write to the Free Software
+//  Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301  USA
+//
+// The above distribution license applies when the file is distributed as a
+// stand alone model file or as part of a library, in both cases intended
+// for reuse combined by the user with other openscad scripts.
+//
+// Use license:
+//  as a special exception, the content of the file may be
+//  embedded in an openscad script that represents a printed circuit board,
+//  for example when a board is exported by pcb-rnd. In such use case,
+//  the content of this file may be copied into the resulting board file
+//  with or without modifications, without affecting the board file's license
+//  in any way.
+//
+
+module multiwatt15()
+{
+    pins=15;
+    pin_thickness = 0.6;
+    pin_width = 0.7;
+    
+    pin_neck = 3.85;
+    pin_spacing = 1.27;
+
+    tab_thickness = 1.6;
+    tab_width = 19.6;
+    tab_height = 6.81;
+    tab_overhang = 6.8;
+    tab_bevel = 2.3;
+    
+    device_height = 10;
+    device_width = 19.6;
+    body_thickness = 4.8;
+    body_offset = 3.4;
+
+    hole_dia = 3.75;
+    hole_height = -4.0;
+    notch_size = 3.0;
+    notch_height = 6.0;
+
+    $fn = 30;
+
+    module pin() {
+        pin_descent = 2.5;
+        rotate([0,-90,180])
+            translate([-pin_thickness/2,0,-pin_width/2])
+                linear_extrude(height=pin_width)
+                    polygon([[0,0],[0.51,0],[0.51,0.56],[0.54,0.7],[0.6,0.82],[0.71,0.93],[0.84,1.02],[1.0,1.08],[6.26,2.24],[6.64,2.35],[6.86,2.47],[7.01,2.59],[7.11,2.74],[7.15,2.9],[7.15,5.5],[6.62,5.5],[6.62,3.29],[6.6,3.14],[6.57,2.99],[6.48,2.87],[6.22,2.76],[6.08,2.72],[0.72,1.55],[0.49,1.45],[0.3,1.34],[0.13,1.21],[0.02,0.99],[0,0.79]]);
+    }
+
+    module pin2() {
+        pin_descent = 2.5;
+        rotate([0,-90,180])
+            translate([-pin_thickness/2,0,-pin_width/2])
+                linear_extrude(height=pin_width)
+                    polygon([[0,0],[0.5,0],[0.5,0.71],[0.51,0.8],[0.54,0.89],[0.61,1.02],[1.70,2.31],[1.84,2.5],[1.92,2.66],[1.95,2.80],[1.96,2.98],[1.97,3.18],[1.97,5.5],[1.37,5.5],[1.37,3.4],[1.36,3.2],[1.34,3.01],[1.29,2.85],[1.22,2.68],[1.12,2.52],[1.02,2.38],[0.2,1.4],[0.13,1.26],[0.06,1.10],[0.01,0.96],[0,0.8]]);
+    }
+
+    module body() {
+        union() {
+            color([0.3,0.3,0.3]) {
+                difference() {
+                    translate([0,hole_height,-body_offset])
+                        translate([device_width/2,0,0])
+                            rotate([0,-90,0])
+                                linear_extrude(height=device_width)
+                                    polygon([[0,0],[1.6,0],[4.8,-0.3],[4.8,-9.6],[3.8,-10.0],[1.6,-10.0],[0,-9.7]]);
+                    translate([-device_width/2,hole_height-notch_height,-3])
+                        cylinder(r=notch_size/2, h=body_thickness*2);
+                    translate([device_width/2,hole_height-notch_height,-3])
+                        cylinder(r=notch_size/2, h=body_thickness*2);
+                }
+            }
+            color([0.8,0.8,0.8])
+                translate([0,hole_height+tab_overhang,-body_offset])
+                    difference() {
+                        linear_extrude(height=tab_thickness)
+                            polygon([[-tab_width/2,-tab_height],[tab_width/2,-tab_height],[tab_width/2,-tab_bevel],[tab_width/2-tab_bevel,0],[-tab_width/2+tab_bevel,0],[-tab_width/2,-tab_bevel]]);
+                    translate([0,-hole_height-tab_overhang,-body_thickness])
+                        cylinder(r=hole_dia/2, h=body_thickness*3);
+                    }
+        }
+    }
+
+    translate([-3.2,device_width/2-pin_spacing/2-pin_width/2,0]) {
+        rotate([90,0,90]) {
+            translate([0,0,0]) {
+                union() {
+                    color([0.9, 0.9, 0.9]) {
+                        for (index = [0:2:pins-1]) {
+                            translate([(index+0.5)*pin_spacing-device_width/2+pin_width/2,pin_neck+0.05,-pin_thickness/2])
+                                pin();
+                        }
+                        for (index = [1:2:pins-1]) {
+                            translate([(index+0.5)*pin_spacing-device_width/2+pin_width/2,pin_neck+0.05,-pin_thickness/2])
+                                pin2();
+                        }
+                    }
+                    translate([0,pin_neck+device_height-hole_height,0])
+                        body();
+                }
+            }
+        }
+    }
+}
Index: trunk/footprint/thru-hole/MULTIWATT8.fp
===================================================================
--- trunk/footprint/thru-hole/MULTIWATT8.fp	(revision 37486)
+++ trunk/footprint/thru-hole/MULTIWATT8.fp	(revision 37487)
@@ -2,6 +2,7 @@
  ha:subc.5 {
   ha:attributes {
    footprint = MULTIWATT8 Power IC
+   openscad = MULTIWATT8.scad
   }
   ha:data {
    li:padstack_prototypes {
Index: trunk/footprint/thru-hole/MULTIWATT8.scad
===================================================================
--- trunk/footprint/thru-hole/MULTIWATT8.scad	(nonexistent)
+++ trunk/footprint/thru-hole/MULTIWATT8.scad	(revision 37487)
@@ -0,0 +1,110 @@
+// Model for vertical MULTIWATT8 package
+//
+// Copyright (C) 2017,2020 Tibor 'Igor2' Palinkas
+// Copyright (C) 2023 Erich Heinzle
+//
+// File distribution license:
+//  This library is free software; you can redistribute it and/or
+//  modify it under the terms of the GNU Lesser General Public
+//  License as published by the Free Software Foundation; either
+//  version 2.1 of the License, or (at your option) any later version.
+//
+//  This library is distributed in the hope that it will be useful,
+//  but WITHOUT ANY WARRANTY; without even the implied warranty of
+//  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+//  Lesser General Public License for more details.
+//
+//  You should have received a copy of the GNU Lesser General Public
+//  License along with this library; if not, write to the Free Software
+//  Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301  USA
+//
+// The above distribution license applies when the file is distributed as a
+// stand alone model file or as part of a library, in both cases intended
+// for reuse combined by the user with other openscad scripts.
+//
+// Use license:
+//  as a special exception, the content of the file may be
+//  embedded in an openscad script that represents a printed circuit board,
+//  for example when a board is exported by pcb-rnd. In such use case,
+//  the content of this file may be copied into the resulting board file
+//  with or without modifications, without affecting the board file's license
+//  in any way.
+//
+
+module multiwatt8()
+{
+    pins=8;
+    pin_thickness = 0.6;
+    pin_width1 = 1.32;
+    pin_width2 = 0.82;
+    
+    pin_neck = 3.85;
+    pin_spacing = 2.54;
+
+    tab_thickness = 1.6;
+    tab_width = 19.6;
+    tab_height = 6.81;
+    tab_overhang = 6.8;
+    tab_bevel = 2.3;
+    
+    device_height = 10;
+    device_width = 19.6;
+    body_thickness = 4.8;
+    body_offset = 3.4;
+
+    hole_dia = 3.75;
+    hole_height = -4.0;
+    notch_size = 3.0;
+    notch_height = 6.0;
+
+    $fn = 30;
+
+    module pin() {
+        pin_descent = 2.5;
+        linear_extrude(height=pin_thickness)
+            polygon([[-pin_width1/2,0],[pin_width1/2,0],[pin_width1/2,pin_width1-pin_width2-pin_neck],[pin_width2/2,-pin_neck],[pin_width2/2,-pin_neck-0.01-pin_descent ],[-pin_width2/2,-pin_neck-0.01-pin_descent],[-pin_width2/2,-pin_neck],[-pin_width1/2,pin_width1-pin_width2-pin_neck]]);
+    }
+
+    module body() {
+        union() {
+            color([0.3,0.3,0.3]) {
+                difference() {
+                    translate([0,hole_height,-body_offset])
+                        translate([device_width/2,0,0])
+                            rotate([0,-90,0])
+                                linear_extrude(height=device_width)
+                                    polygon([[0,0],[1.6,0],[4.8,-0.3],[4.8,-9.6],[3.8,-10.0],[1.6,-10.0],[0,-9.7]]);
+                    translate([-device_width/2,hole_height-notch_height,-3])
+                        cylinder(r=notch_size/2, h=body_thickness*2);
+                    translate([device_width/2,hole_height-notch_height,-3])
+                        cylinder(r=notch_size/2, h=body_thickness*2);
+                }
+            }
+            color([0.8,0.8,0.8])
+                translate([0,hole_height+tab_overhang,-body_offset])
+                    difference() {
+                        linear_extrude(height=tab_thickness)
+                            polygon([[-tab_width/2,-tab_height],[tab_width/2,-tab_height],[tab_width/2,-tab_bevel],[tab_width/2-tab_bevel,0],[-tab_width/2+tab_bevel,0],[-tab_width/2,-tab_bevel]]);
+                    translate([0,-hole_height-tab_overhang,-body_thickness])
+                        cylinder(r=hole_dia/2, h=body_thickness*3);
+                    }
+        }
+    }
+
+    translate([-3.2,device_width/2-pin_spacing/2-pin_width2/2,0]) {
+        rotate([90,0,90]) {
+            translate([0,0,0]) {
+                union() {
+                    color([0.9, 0.9, 0.9]) {
+                        for (index = [0:pins-1]) {
+                            translate([(index+0.5)*pin_spacing+-device_width/2+pin_width2/2,pin_neck+0.05,-pin_thickness/2])
+                                pin();
+                        }
+                    }
+                    translate([device_width/2-3.55*pin_spacing,pin_neck+device_height-hole_height,0])
+                        body();
+                }
+            }
+        }
+    }
+}