Index: TACT_6x6_4p
===================================================================
--- TACT_6x6_4p	(revision 37491)
+++ TACT_6x6_4p	(revision 37492)
@@ -2,6 +2,7 @@
  ha:subc.5 {
   ha:attributes {
    footprint=tactile button
+   openscad=TACT_6x6_4p.scad
   }
   ha:data {
    li:padstack_prototypes {
Index: TACT_6x6_4p.scad
===================================================================
--- TACT_6x6_4p.scad	(nonexistent)
+++ TACT_6x6_4p.scad	(revision 37492)
@@ -0,0 +1,96 @@
+// Model for 6x6mm tactile switch
+// openscad parameter button_height defaults to 1mm
+//
+// Copyright (C) 2017,2020 Tibor 'Igor2' Palinkas
+// Copyright (C) 2023 Erich Heinzle
+//
+// File distribution license:
+//  This library is free software; you can redistribute it and/or
+//  modify it under the terms of the GNU Lesser General Public
+//  License as published by the Free Software Foundation; either
+//  version 2.1 of the License, or (at your option) any later version.
+//
+//  This library is distributed in the hope that it will be useful,
+//  but WITHOUT ANY WARRANTY; without even the implied warranty of
+//  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+//  Lesser General Public License for more details.
+//
+//  You should have received a copy of the GNU Lesser General Public
+//  License along with this library; if not, write to the Free Software
+//  Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301  USA
+//
+// The above distribution license applies when the file is distributed as a
+// stand alone model file or as part of a library, in both cases intended
+// for reuse combined by the user with other openscad scripts.
+//
+// Use license:
+//  as a special exception, the content of the file may be
+//  embedded in an openscad script that represents a printed circuit board,
+//  for example when a board is exported by pcb-rnd. In such use case,
+//  the content of this file may be copied into the resulting board file
+//  with or without modifications, without affecting the board file's license
+//  in any way.
+//
+
+module tact6x6(button_height=1.0)
+{
+    pin_thickness = 0.3;
+    pin_width = 0.7;
+    pin_spacing = 4.5;
+
+    body_width = 6;
+    body_thickness = 3.5;
+    plate_thickness = 0.3;
+
+    button_dia = 3.0;
+    dimple_size = 1.0;
+    dimple_height = 0.3;
+    dimple_spacing = 4.5;
+
+    $fn = 30;
+
+    module pin() {
+        rotate([90,0,0])
+            translate([-pin_thickness/2,1.2,-pin_width/2])
+                linear_extrude(height=pin_width)
+                    polygon([[0,0],[0.3,0],[0.3,-1.8],[0.6,-3.0],[0.3,-4.2],[0.3,-4.7],[0.15,-5.0],[0,-4.7],[0,-4.2],[0.3,-3.0],[0,-1.8]]);
+    }
+
+    module body() {
+        union() {
+            color([0.9, 0.9, 0.9])
+                translate([0,0,body_thickness-plate_thickness/2])
+                    cube([body_width,body_width,plate_thickness], true);
+            color([0.1,0.1,0.1]) {
+                translate([0,0,(body_thickness-plate_thickness)/2])
+                    cube([body_width,body_width,body_thickness-plate_thickness], true);
+                translate([0,0,body_thickness])
+                    cylinder(r=button_dia/2, h=button_height);
+                translate([dimple_spacing/2,dimple_spacing/2,body_thickness])
+                    cylinder(r=dimple_size/2, h=dimple_height);
+                translate([-dimple_spacing/2,dimple_spacing/2,body_thickness])
+                    cylinder(r=dimple_size/2, h=dimple_height);
+                translate([-dimple_spacing/2,-dimple_spacing/2,body_thickness])
+                    cylinder(r=dimple_size/2, h=dimple_height);
+                translate([dimple_spacing/2,-dimple_spacing/2,body_thickness])
+                    cylinder(r=dimple_size/2, h=dimple_height);                
+            }
+        }
+    }
+
+    union() {
+        body();
+        color([0.9, 0.9, 0.9]) {
+            translate([body_width/2+pin_thickness/2,pin_spacing/2,0])
+                    pin();
+            translate([body_width/2+pin_thickness/2,-pin_spacing/2,0])
+                    pin();
+            translate([-body_width/2-pin_thickness/2,pin_spacing/2,0])
+               rotate([0,0,180])
+                    pin();
+            translate([-body_width/2-pin_thickness/2,-pin_spacing/2,0])
+               rotate([0,0,180])
+                    pin();
+        }
+    }
+}