Index: trunk/footprint/connector/pwrjack.fp
===================================================================
--- trunk/footprint/connector/pwrjack.fp	(revision 37501)
+++ trunk/footprint/connector/pwrjack.fp	(revision 37502)
@@ -2,6 +2,7 @@
  ha:subc.5 {
   ha:attributes {
    footprint = power jack
+   openscad = pwrjack.scad
   }
   ha:data {
    li:padstack_prototypes {
Index: trunk/footprint/connector/pwrjack.scad
===================================================================
--- trunk/footprint/connector/pwrjack.scad	(nonexistent)
+++ trunk/footprint/connector/pwrjack.scad	(revision 37502)
@@ -0,0 +1,101 @@
+// Model for generic DC power jack, defaults to 2.1mm pin
+// openscad-param= {centre_pin_dia=2.X}
+//
+// Copyright (C) 2023 Erich Heinzle
+//
+// File distribution license:
+//  This library is free software; you can redistribute it and/or
+//  modify it under the terms of the GNU Lesser General Public
+//  License as published by the Free Software Foundation; either
+//  version 2.1 of the License, or (at your option) any later version.
+//
+//  This library is distributed in the hope that it will be useful,
+//  but WITHOUT ANY WARRANTY; without even the implied warranty of
+//  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+//  Lesser General Public License for more details.
+//
+//  You should have received a copy of the GNU Lesser General Public
+//  License along with this library; if not, write to the Free Software
+//  Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301  USA
+//
+// The above distribution license applies when the file is distributed as a
+// stand alone model file or as part of a library, in both cases intended
+// for reuse combined by the user with other openscad scripts.
+//
+// Use license:
+//  as a special exception, the content of the file may be
+//  embedded in an openscad script that represents a printed circuit board,
+//  for example when a board is exported by pcb-rnd. In such use case,
+//  the content of this file may be copied into the resulting board file
+//  with or without modifications, without affecting the board file's license
+//  in any way.
+//
+
+module pwrjack(centre_pin_dia = 2.1)
+{
+    pin_thickness = 0.3;
+    pin1_width = 2.8;
+    pin23_width = 2.0;
+    pin_spacing = 7;
+    pin_descent = 2.5;
+
+    body_width = 8.8;
+    body_length = 13.2;
+    body_height = 10.9;
+    body_front_lip = 3.3;
+    axis_height = 6.5;
+    
+    opening = 6.3;
+    
+    module pin1() {
+        cube([pin1_width,pin_thickness,axis_height+pin_descent],false);
+    }
+
+    module pin2() {
+        cube([pin23_width,pin_thickness,axis_height+pin_descent],false);
+    }
+
+    module pin3() {
+        cube([pin23_width,pin_thickness,pin_descent+0.05],false);
+    }
+    
+    module body() {
+        color([0.3,0.3,0.3])
+            difference () {
+                union() {
+                    translate([0,body_length/2,axis_height/2])
+                        cube([body_width,body_length,axis_height], true);
+                    translate([0,body_length-body_front_lip/2,body_height/2])
+                        cube([body_width,body_front_lip,body_height], true);
+                    translate([0,0,axis_height])
+                        rotate([-90,0,0])
+                            cylinder(r=body_width/2, h=body_length);
+                }
+                 translate([0,body_front_lip,axis_height])
+                     rotate([-90,0,0])
+                         cylinder(r=opening /2, h=body_length);            
+            }
+            color([0.8,0.8,0.8]) {
+                translate([0,-pin_thickness,axis_height])
+                    rotate([-90,0,0])
+                        cylinder(r=centre_pin_dia/2, h=body_length+pin_thickness);
+                translate([0,0,axis_height])
+                    rotate([90,0,0])
+                        cylinder(r=2, h=pin_thickness);
+            }
+    }
+
+    rotate([0,0,-90])
+        union() {
+            body();
+            color([0.9, 0.9, 0.9]) {
+                translate([-pin1_width/2,-pin_thickness+0.01,-pin_descent])
+                    pin1();
+                translate([-pin23_width/2,pin_spacing,-pin_descent])
+                    pin3();
+                translate([-body_width/2,pin_spacing/2-pin23_width/2,-pin_descent])
+                    rotate([0,0,90])
+                        pin2();
+            }
+        }
+}