Index: flag.h
===================================================================
--- flag.h	(revision 4881)
+++ flag.h	(revision 4882)
@@ -94,7 +94,96 @@
 /*	PCB_FLAG_NOCOPY     = (PCB_FLAG_FOUND | CONNECTEDFLAG | PCB_FLAG_ONPOINT)*/
 } pcb_flag_values_t;
 
+/* ---------------------------------------------------------------------------
+ * PCB flags - kept only for file format compatibility reasons; these bits
+   should be a mirror of booleans from the conf.
+ */
+/* %start-doc pcbfile ~pcbflags
+@node PCBFlags
+@section PCBFlags
+@table @code
+@item 0x00001
+Pinout displays pin numbers instead of pin names.
+@item 0x00002
+Use local reference for moves, by setting the mark at the beginning of
+each move.
+@item 0x00004
+When set, only polygons and their clearances are drawn, to see if
+polygons have isolated regions.
+@item 0x00008
+Display DRC region on crosshair.
+@item 0x00010
+Do all move, mirror, rotate with rubberband connections.
+@item 0x00020
+Display descriptions of elements, instead of refdes.
+@item 0x00040
+Display names of elements, instead of refdes.
+@item 0x00080
+Auto-DRC flag.  When set, PCB doesn't let you place copper that
+violates DRC.
+@item 0x00100
+Enable 'all-direction' lines.
+@item 0x00200
+Switch starting angle after each click.
+@item 0x00400
+Force unique names on board.
+@item 0x00800
+New lines/arc clear polygons.
+@item 0x01000
+Crosshair snaps to pins and pads.
+@item 0x02000
+Show the solder mask layer.
+@item 0x04000
+Draw with thin lines.
+@item 0x08000
+Move items orthogonally.
+@item 0x10000
+Draw autoroute paths real-time.
+@item 0x20000
+New polygons are full ones.
+@item 0x40000
+Names are locked, the mouse cannot select them.
+@item 0x80000
+Everything but names are locked, the mouse cannot select anything else.
+@item 0x100000
+New polygons are full polygons.
+@item 0x200000
+When set, element names are not drawn.
++@item 0x800000
++snap to certain off-grid points.
++@item 0x1000000
++highlight lines and arcs when the crosshair is on one of their endpoints.
+@end table
+%end-doc */
 
+#define PCB_FLAGS               0x01ffffff	/* all used flags */
+
+#define SHOWNUMBERFLAG          0x00000001
+#define LOCALREFFLAG            0x00000002
+#define CHECKPLANESFLAG         0x00000004
+#define SHOWPCB_FLAG_DRC             0x00000008
+#define RUBBERBANDFLAG          0x00000010
+#define	DESCRIPTIONFLAG         0x00000020
+#define	NAMEONPCBFLAG           0x00000040
+#define AUTOPCB_FLAG_DRC             0x00000080
+#define	ALLDIRECTIONFLAG        0x00000100
+#define SWAPSTARTDIRFLAG        0x00000200
+#define UNIQUENAMEFLAG          0x00000400
+#define CLEARNEWFLAG            0x00000800
+#define SNAPPCB_FLAG_PIN             0x00001000
+#define SHOWMASKFLAG            0x00002000
+#define THINDRAWFLAG            0x00004000
+#define ORTHOMOVEFLAG           0x00008000
+#define LIVEROUTEFLAG           0x00010000
+#define THINDRAWPOLYFLAG        0x00020000
+#define LOCKNAMESFLAG           0x00040000
+#define ONLYNAMESFLAG           0x00080000
+#define NEWPCB_FLAG_FULLPOLY         0x00100000
+#define HIDENAMESFLAG           0x00200000
+#define ENABLEPCB_FLAG_MINCUT        0x00400000
+
+
+
 /* For passing modified flags to other functions. */
 pcb_flag_t pcb_flag_make(unsigned int);
 pcb_flag_t pcb_flag_old(unsigned int);